BOL: All site bookmarks

COSMIC

Jit — Sat, 01 Oct 2016 15:04:10 -0500

The accurate description and annotation of structural variants can be complex. This is due to the different resolution that variants are reported from traditional cytogenetic coordinates down to the actual base pair positions. Furthermore, multiple rearrangements in a single area of the genome can make cataloguing and interpreting their effects challenging.

The Rearrangement Overview page describes the one or more breakpoints which make up a structural variant. A breakpoint is defined as a region or point where the sample sequence has altered from the reference sequence. Minimum interpretation is made of this data. One variant event can consist of one or multiple breakpoints. The Syntax (shown above the table) gives a detailed description of the variant and its location (e.g. chr11:g.36585230_76606619del, a deletion of roughly 40Mb on chromosome 11). Syntax is based on HGVS mutation nomenclature recommendations [http://www.hgvs.org/rec.html].

http://cancer.sanger.ac.uk/cosmic/help/rearrangement/overview

Address of the bookmark: http://cancer.sanger.ac.uk/cosmic/help/rearrangement/overview

Nemo – A stochastic, individual-base, genetically explicit simulation platform

Jit — Sat, 01 Oct 2016 14:45:02 -0500

A recombination map has been added for all multi-locus traits. The map positions (chromosomal) for neutral markers (e.g. SNPs) and loci under selection (QTLs, deleterious mutations, DMIs) can now be specified explicitly, or set at random. The map can hold an unlimited number of loci of different types jointly, at any recombination scale (cM or lower). The effects of linkage can thus be finely explored.
A new trait coding for (Bateson-)Dobzhansky-Muller incompatibility loci. Multiple haploid or diploid pairs of incompatible loci can be spread throughout the genome and affect individual fitness.
Multi-type selection: Individual fitness can be jointly determined by different types of loci under selectinon, such as QTLs coding for quantitative traits under spatially variable selection, universally deleterious mutations, and Dobzhansky-Muller incompatibility loci.
An unlimited number of quantitative traits under different forms of selection can be modelled, based on universally pleiotropic loci with several bi- or multi-allelic models.
Spatial and temporal variation of selection on quantitative traits is possible, modelling shifts of environmental conditions over time.
The dispersal matrix describing the movement of individuals among sub-populations can be replaced by a connectivity matrix and a reduced dispersal matrix describing migration only among the connected sub-populations. This offers a substantial gain in computing time and system memory when simulating very large grids.
Input parameters' arguments may be specified in separate files. This is particularly convenient when specifying large matrices.
Many adjustments have been made for refined control of the input of parameters and data output. See updates in the manual.

Address of the bookmark: http://nemo2.sourceforge.net/index.html

Murasaki

Anjana — Fri, 30 Sep 2016 10:22:30 -0500

Murasaki is an anchor alignment program that is

exteremely fast (17 CPU hours for whole Human x Mouse genome (with 40 nodes: 35 wall minutes), or 8 mammals in 21 CPU hours (42 wall minutes))
scalable (Arbitrarily parallelizable across multiple nodes using MPI)
memory efficient. (Even a single node with 16GB of ram can handle over 1Gbp of sequence)
unlimited by pattern length or selection
repeat tolerant

Address of the bookmark: http://murasaki.dna.bio.keio.ac.jp/wiki/index.php?Murasaki

Strudel

Anjana — Fri, 30 Sep 2016 09:47:02 -0500

Strudel is our graphical tool for visualizing genetic and physical maps of genomes for comparative purposes. The application aims to let the user examine their data at a variety of different levels of resolution, from entire maps to individual markers, and explore syntenic relationships between genomes. All browsing and interaction with Strudel happens in real-time – there is no need to wait while the maps are generated. It is built using Java 1.6 and ships with its own JRE, so there is no need for users to install or update Java.

Address of the bookmark: https://ics.hutton.ac.uk/strudel/

DECIPHER

Anjana — Fri, 30 Sep 2016 09:33:12 -0500

DECIPHER is a software toolset that can be used to maintain, analyze, and decipher large amounts of DNA sequence data. To install DECIPHER, see the Downloads page.

To begin using DECIPHER read the "Getting Started DECIPHERing" tutorial. Refer to the PDF documents below for instructions on how to use DECIPHER for various tasks.

Address of the bookmark: http://decipher.cee.wisc.edu/Documentation.html

BLAST Ring Image Generator (BRIG)

Anjana — Fri, 30 Sep 2016 09:18:50 -0500

BRIG is a free cross-platform (Windows/Mac/Unix) application that can display circular comparisons between a large number of genomes, with a focus on handling genome assembly data. The application is available at: http://sourceforge.net/projects/brig

If you have any questions or comments, post them on one of the trackers on BRIG’s SourceForge page: http://sourceforge.net/tracker/?group_id=328245.

Features:

Images show similarity between a central reference sequence and other sequences as concentric rings.
BRIG will perform all BLAST comparisons and file parsing automatically via a simple GUI.
Contig boundaries and read coverage can be displayed for draft genomes; customized graphs and annotations can be displayed.
Using a user-defined set of genes as input, BRIG can display gene presence, absence, truncation or sequence variation in a set of complete genomes, draft genomes or even raw, unassembled sequence data.
BRIG also accepts SAM-formatted read-mapping files enabling genomic regions present in unassembled sequence data from multiple samples to be compared simultaneously

Address of the bookmark: http://brig.sourceforge.net/

valet

Jit — Thu, 22 Sep 2016 04:27:09 -0500

VALET is a pipeline for performing de novo validation of metagenomic assemblies. VALET checks a number of properties that should hold true for a correct assembly (e.g., mate-pairs are aligned at the correct distance from each other in the assembly, the depth of coverage is fairly uniform along contigs, etc.). The violations of these invariants are reported allowing one to pinpoint areas that were potentially mis-assembled, or to compare the quality of different assemblies. For comparing multiple assemblies of the same data-sets, VALET also reports an overall estimate of the likelihood a particular assembly is correct.

Home Page:

VALET code repository

Address of the bookmark: https://www.cbcb.umd.edu/software/valet

CGView - Circular Genome Viewer

Jit — Mon, 19 Sep 2016 07:52:26 -0500

GView is a Java package used to display and navigate bacterial genomes. GView is useful for producing high-quality genome maps for use in publications and websites, or as a visualization tool in a sequence annotation pipeline. Users can interact with the genome using a powerful pan-and-zoom interface, or GView can write static images of a genome to a file. GView can draw a genome using either circular or linear layouts. For examples of some of the images GView can produce, see the Image Gallery. GView is a re-write of CGView, a circular genome viewer written by Paul Stothard. The goal of GView is to provide greater user interaction, and more flexibility in how the genome map is rendered. To aid with easily configuring the display of a genome, a style editor has been included to provide an intuitive, user-friendly graphical user interface for customizing genome maps. Styling attributes such as colours or fonts for the various map elements can be adjusted in real time. Customized styles can be saved for later use or for application to other genome maps using GView's custom file format.

Address of the bookmark: http://wishart.biology.ualberta.ca/cgview/

FERMI

Jit — Fri, 09 Sep 2016 05:37:13 -0500

Fermi is a de novo assembler with a particular focus on assembling Illumina short sequence reads from a mammal-sized genome. In addition to the role of a typical assembler, fermi also aims to preserve heterozygotes which are often collapsed by other assemblers. Its ultimate goal is to find a minimal set of
unitigs to represent all the information in raw reads.

Fermi follows the overlap-layout-consensus paradigm and uses the FM-DNA-index (FMD-index) as the key data structure. It is inspired by the string graph assembler (Simpson and Durbin, 2010 and 2012) and has a similar workflow.

As a typical de novo assembler, fermi tends to produce contigs with slightly longer N50. However, the major weakness of fermi is the high misassembly rate. Although fermi provides a tool to fix misassemblies by using paired-end reads to achieve an accuracy comparable to other assemblers, this is not a favorable solution.

Fermi is designed to be used on a multi-core Linux machine with large shared memory. The easiest way to run fermi is to use the run-fermi.pl script. It generates a Makefile. The actual assembly is done by invoking make. Premature assembly processes can be resumed. Here is an example:

run-fermi.pl -dAPe ./fermi -p NA12878 -t16 -f18 reads*.fq.gz > NA12878.mak
make -f NA12878.mak -j16

Address of the bookmark: https://github.com/lh3/fermi

OPERA : Optimal Paired-End Read Assembler

Jit — Fri, 09 Sep 2016 05:28:58 -0500

OPERA (Optimal Paired-End Read Assembler) is a sequence assembly program (http://en.wikipedia.org/wiki/Sequence_assembly). It uses information from paired-end/mate-pair/long reads to order and orient the intermediate contigs/scaffolds assembled in a genome assembly project, in a process known as Scaffolding. OPERA is based on an exact algorithm that is guaranteed to minimize the discordance of scaffolds with the information provided by the paired-end/mate-pair/long reads (for further details see Gao et al, 2011).

Note that since the original publication, we have made significant changes to OPERA (v1.0 onwards) including refinements to its basic algorithm (to reduce local errors, improve efficiency etc.) and incorporated features that are important for scaffolding large genomes (multi-library support, better repeat-handling etc.), in addition to other scalability and usability improvements (bam and gzip support, smaller memory footprint). We therefore encourage you to download and use our latest version: OPERA-LG. In our benchmarks, it has significantly improved corrected N50 and reduced the number of scaffolding errors. Furthermore, our latest release contains the wrapper script OPERA-long-read that enables scaffolding with long-reads from third-generation sequencing technologies (PacBio or Oxford Nanopore). The manuscript describing the new features and algorithms is available at Genome Biology. We look forward to getting your feedback to improve it further.

Address of the bookmark: https://sourceforge.net/p/operasf/wiki/The%20OPERA%20wiki/