BOL: Related items

Rolland-Lagan lab

Sun, 14 Jul 2013 12:57:57 -0500

The Rolland-Lagan lab at the University of Ottawa is specializing in computational and developmental biology. We use a combination of experimental work, microscopy, image analysis and computer simulations to explore developmental mechanisms in two and three dimensions.

Research Area

Developmental biology, Computational biology, Simulation modeling, Image data analysis

Link @ http://mysite.science.uottawa.ca/arolland/index.html

Installing Perl GD Module

Jit — Mon, 22 Jul 2013 14:02:01 -0500

In comparative genome analysis work, we usually compare more than two genomes and looks for syntenic regions amongst them. In my research I used Evolution Highway (RH) http://eh-demo.ncsa.uiuc.edu/, which is a collaborative project designed to provide a visual means for simultaneously comparing genomes of multiple amniote species. The tool removes the burden of manually aligning these maps and allows cognitive skills to be used toward something more valuable than preparation and transformation of data. In addition to EH, attractive Circos (http://circos.ca/) is also very popular for this kind of analysis.

The EH is available online, and can be easily access and use, whereas Circos installation is not entirely straightforward. One of the most difficult parts of the installation involves installing the GD library. Since there weren't good instructions for installing this library on the internet I decided to post instructions here in case they are useful to anyone else.

Following are the steps to install GD modules in Mac OS

1. Setup

Create a folder for the files:

$ mkdir -p /SourceCache
$ cd /SourceCache

Get and unpack the required Jpeg-6b and GD libraries:
Download Jpeg-6b (http://code.google.com/p/google-desktop-for-linux-mirror/downloads/detail?name=jpeg-6b.tar.gz&can=2&q)
Download GD (http://search.cpan.org/~lds/GD-2.46/)

Place the "tar.gz" files in "/SourceCache" and double click to unpack.

2. Install libjpeg

Copy the "config.sub" and "config.guess" files to "/SourceCache". Note that your "config.sub" and ""config.guess" files may be in a slightly different location. The commands below show where they were on my machine:

$ cd /SourceCache/jpeg-6b/src
$ cp /usr/share/libtool/config/config.sub .
$ cp /usr/share/libtool/config/config.guess .

Configure libjpeg as follows. Note that this was installed on a 64 bit machine. However, this method may configure it in a 32 bit format. This may not be the best way to configure the installation but it works.

$ .configure --enable-shared
$ make

Check to see if the following directories exist on your machine. Create the missing directories in the following manner:

$ mkdir -p /usr/local/include
$ mkdir -p /usr/local/bin
$ mkdir -p /usr/local/lib
$ mkdir -p /usr/local/man/man1

Finish making and installing libjpeg:

$ make install

3. Install GD

$ cd /SourceCache/GD-2.46/GD/
$ perl Makefile.PL
$ make
$ make test (optional)
$ make html (optional)
$ make install

Other way for Mac OS
The easiest way to get a lot of these is with a program called Fink, which is similar in nature to the CPAN installer, but installs common GNU utilities. Fink is available from <http://sourceforge.net/projects/fink/>.

Follow the instructions for setting up Fink. Once it's installed, you'll want to run the following as root: fink install gd

It will prompt you for a number of dependencies, type 'y' and hit enter to install all of the dependencies. Then watch it work.

To prevent creating conflicts with the software that Apple installs by default, Fink creates its own directory tree at /sw where it installs most of the software that it installs. This means your libraries and headers for libgd will be at /sw/lib and /sw/include instead of /usr/lib and /usr/local/include. Because of these changed locations for the libraries, the Perl GD module will not install directly via CPAN, because it looks for the specific paths instead of getting them from your environment. But there's a way around that :-)

Instead of typing "install GD" at the cpan> prompt, type look GD. This should go through the motions of downloading the latest version of the GD module, then it will open a shell and drop you into the build directory. Apply below patch to the Makefile.PL file (save the patch into a file and use the command patch < patchfile.)

Then, run these commands to finish the installation of the GD module:

perl Makefile.PL
make
make test
make install
And don't forget to run exit to get back to CPAN.

Install on MS Window, using PPM

C:\Documents and Settings\Owner>ppm
PPM interactive shell (2.2.0) - type 'help' for available commands.
PPM> install GD
Install package 'GD?' (y/N): y
Installing package 'GD'...
Downloading http://ppm.ActiveState.com/PPMPackages/5.6plus/MSW. ...
Installing C:\Perl\site\lib\auto\GD\GD.bs
Installing C:\Perl\site\lib\auto\GD\GD.dll
Installing C:\Perl\site\lib\auto\GD\GD.exp
Installing C:\Perl\site\lib\auto\GD\GD.lib
Installing C:\Perl\html\site\lib\GD.html
Installing C:\Perl\site\lib\GD.pm
Installing C:\Perl\site\lib\qd.pl
Installing C:\Perl\site\lib\auto\GD\autosplit.ix
PPM>

If you can't install it from ppm. You can download it:
http://ppm.ActiveState.com/PPMPackages/5.6plus/MSW.

BTW,All Perl 5.6.1 Modules are located at:

http://ppm.ActiveState.com/PPMPackages/5.6plus/MSW.

Install the Perl GD Module on Linux

$ sudo perl -MCPAN -e shell

Since it was the first time I had run this command on this particular machine I had to answer a lot of questions but simply selected the defaults for everything as this usually works for me. Once in the CPAN shell I entered

$ install Bundle::CPAN

and selected all of the defaults again. Once the CPAN bundle had finished installing I tried to install GD::Graph by typing

$ install GD::Graph

but it failed with hundreds of errors – the first of which was

GD.xs:7:16: error: gd.h: No such file or directory

This was fixed with the following apt-get command (in the bash shell)

$ sudo apt-get install libgd2-xpm-dev

back in the CPAN shell I still couldn’t get GD::Graph to build and I guessed this was because of some left over files from the failed build. I don’t know the command to clean things up inside the CPAN shell and am too lazy to read the docs so I simply went into the .cpan/build directory in my home directory and deleted anything that started with GD – eg

$ rm -rf GD-2.35-HC_vkB

$ rm -rf GDGraph-1.44-Evfibe

and so on. Those strings at the end (VkB and so on) look random so they might be different on your machine. Then I went back into the CPAN shell and ran

$ install GD::Graph

There were a few dependencies which the script fetched and installed for me but everything worked smoothly.

Manual and other Perl Module instalation are mentioned in my previous blog @ http://bioinformaticsonline.com/blog/view/710/how-to-install-perl-modules-manually-using-cpan-command-and-other-quick-ways

Creating conda environment for python2.7

Jit — Mon, 07 May 2018 08:56:52 -0500

TIP: By default, environments are installed into the envs directory in your conda directory. Run conda create --help for information on specifying a different path.

Use the Terminal or an Anaconda Prompt for the following steps.

To create an environment:
```
conda create --name myenv
```
NOTE: Replace myenv with the environment name.
When conda asks you to proceed, type y:
```
proceed ([y]/n)?
```

This creates the myenv environment in /envs/. This environment uses the same version of Python that you are currently using, because you did not specify a version.

To create an environment with a specific version of Python:

conda create -n myenv python=3.4

To create an environment with a specific package:

conda create -n myenv scipy

OR:

conda create -n myenv python
conda install -n myenv scipy

To create an environment with a specific version of a package:

conda create -n myenv scipy=0.15.0

OR:

conda create -n myenv python
conda install -n myenv scipy=0.15.0

To create an environment with a specific version of Python and multiple packages:

conda create -n myenv python=3.4 scipy=0.15.0 astroid babel

TIP: Install all the programs that you want in this environment at the same time. Installing 1 program at a time can lead to dependency conflicts.

To automatically install pip or another program every time a new environment is created, add the default programs to the create_default_packages section of your .condarc configuration file. The default packages are installed every time you create a new environment. If you do not want the default packages installed in a particular environment, use the --no-default-packages flag:

conda create --no-default-packages -n myenv python

TIP: You can add much more to the conda create command. For details, run conda create --help.

➜ redundans git:(master) ✗ conda create --name py27 python=2.7
Solving environment: done

==> WARNING: A newer version of conda exists. <==
current version: 4.5.0
latest version: 4.5.2

Please update conda by running

$ conda update -n base conda

## Package Plan ##

environment location: /home/urbe/anaconda3/envs/py27

added / updated specs:
- python=2.7

The following packages will be downloaded:

package | build
---------------------------|-----------------
wheel-0.31.0 | py27_0 61 KB
python-2.7.15 | h1571d57_0 12.1 MB
certifi-2018.4.16 | py27_0 142 KB
sqlite-3.23.1 | he433501_0 1.5 MB
setuptools-39.1.0 | py27_0 582 KB
openssl-1.0.2o | h20670df_0 3.4 MB
pip-10.0.1 | py27_0 1.7 MB
ca-certificates-2018.03.07 | 0 124 KB
------------------------------------------------------------
Total: 19.6 MB

The following NEW packages will be INSTALLED:

ca-certificates: 2018.03.07-0
certifi: 2018.4.16-py27_0
libedit: 3.1-heed3624_0
libffi: 3.2.1-hd88cf55_4
libgcc-ng: 7.2.0-hdf63c60_3
libstdcxx-ng: 7.2.0-hdf63c60_3
ncurses: 6.0-h9df7e31_2
openssl: 1.0.2o-h20670df_0
pip: 10.0.1-py27_0
python: 2.7.15-h1571d57_0
readline: 7.0-ha6073c6_4
setuptools: 39.1.0-py27_0
sqlite: 3.23.1-he433501_0
tk: 8.6.7-hc745277_3
wheel: 0.31.0-py27_0
zlib: 1.2.11-ha838bed_2

Proceed ([y]/n)? y

Downloading and Extracting Packages
wheel 0.31.0: #################################################################################################################################################################################################### | 100%
python 2.7.15: ################################################################################################################################################################################################### | 100%
certifi 2018.4.16: ############################################################################################################################################################################################### | 100%
sqlite 3.23.1: ################################################################################################################################################################################################### | 100%
setuptools 39.1.0: ############################################################################################################################################################################################### | 100%
openssl 1.0.2o: ################################################################################################################################################################################################## | 100%
pip 10.0.1: ###################################################################################################################################################################################################### | 100%
ca-certificates 2018.03.07: ###################################################################################################################################################################################### | 100%
Preparing transaction: done
Verifying transaction: done
Executing transaction: done
#
# To activate this environment, use:
# > source activate py27
#
# To deactivate an active environment, use:
# > source deactivate
#

➜ redundans git:(master) ✗ source activate py27

Subprocess pkg

Rahul Agarwal — Sun, 17 Aug 2014 07:59:32 -0500

Subprocess is one of simplest way of running linux command from within python code

Example:

if you want to run fastqc for QC of fastq file:

from subprocess import Popen,PIPE,call

p=Popen(["fastqc","-f","fastq","-o", "/home/name/result/","/dev/stdin"],stdin=fopen("read.fastq","r") ,stdout=PIPE,stderr=PIPE)

print p.stderr

p.stdout.close()

http://pymotw.com/2/subprocess/

Ventoy: an open source tool to create bootable USB drive

LEGE — Tue, 29 Jun 2021 10:16:19 -0500

Ventoy is an open source tool to create bootable USB drive for ISO/WIM/IMG/VHD(x)/EFI files. With ventoy, you don't need to format the disk over and over, you just need to copy the image files to the USB drive and boot it. You can copy many image files at a time and ventoy will give you a boot menu to select them. x86 Legacy BIOS, IA32 UEFI, x86_64 UEFI, ARM64 UEFI and MIPS64EL UEFI are supported in the same way. Both MBR and GPT partition style are supported in the same way. Most type of OS supported(Windows/WinPE/Linux/Unix/Vmware/Xen...) 700+ ISO files are tested.

Address of the bookmark: https://github.com/ventoy/Ventoy

JPred4: A Protein Secondary Structure Prediction Server

Poonam Mahapatra — Fri, 29 Dec 2017 16:14:28 -0600

JPred4 (http://www.compbio.dundee.ac.uk/jpred4) is the latest version of the popular JPred protein secondary structure prediction server which provides predictions by the JNet algorithm, one of the most accurate methods for secondary structure prediction.

Address of the bookmark: http://www.compbio.dundee.ac.uk/jpred4/

Installing ELGG on Ubuntu !

Jit — Thu, 25 Nov 2021 01:45:59 -0600

Follow this:

Settings file

Error

Your web server does not have permission to create the settings.php file in your installation directory. You have two choices:

1. Change the permissions on the elgg-config directory of your Elgg installation

2. Copy the file elgg-config/settings.example.php to elgg-config/settings.php and follow the instructions in it for setting your database parameters.

To resolve this --

Change the permision

chmod 777 elgg-config

Web server

Warning

Your server does not support automatic testing of the rewrite rules and your browser does not support checking via JavaScript. You can continue the installation, but you may experience problems with your site. You can manually test the rewrite rules by clicking this link: test. You will see the word success if the rules are working.

create a .httaccess

and provide detail in it

Installation of Elgg

(Note: Elgg requires installing an instance of MySQL.)

Steps to make adjustment and disposal of trial installations easier.

MySQL

At this point, we assume you've set up your MySQL database

Start your mysqld server daemon.
(For the sake of this example, we'll assume we're running on port 9999; you shouldn't actually use this port because only one daemon can run on any port number.)
Login to the server as root user, using the mysql client.
Create a database to store Elgg's tables. We'll call the database elggalpha.
mysql> create database elggalpha;

Grant access to a user — for this example we'll call him/her elggalphauser.

mysql> grant all privileges on elggalpha.* to 'elggalphauser'@'moxie'
    -> identified by 'secretpassword';

Elgg

Type umask 022
Change into your public_html directory (aka folder).
cd public_html
make a directory called elgg
mkdir elgg
Change into the elgg subdirectory of public_html.
cd elgg
download elgg into this directory
you'll end up with a file named
/home/your-user-id/public_html/elgg/elgg-X.X.X.X.zip
(It's not literally X.X.X.X, it might be elgg-1.8.0.1.zip, for example.)
unzip elgg
unzip -q elgg-1.8.0.1.zip
you'll end up with a directory (folder) named
/home/your-user-id/public_html/elgg/elgg-X.X.X.X
make a symbolic link (aka shortcut) to this
ln -s elgg-X.X.X.X alpha
(For example, ln -s elgg-1.8.0.1 alpha)
Give user nobody access to this directory
/usr/misc/bin/acl.sh -r -u nobody elgg-1.8.0.1
create a data directory for elgg (get into your home directory first):
```
cd
mkdir -p elgg/alpha/data
chmod -R 755 elgg/alpha/data
```
Change into the elgg/alpha directory.
cd elgg/alpha
Give user nobody access to this subdirectory data
/usr/misc/bin/acl.sh -u nobody data

In your browser, navigate to your elgg installation
http://moxie.cs.oswego.edu/~your-user-id/elgg/alpha/
You'll have a screen which includes this message:

Welcome

Installing Elgg has 6 simple steps and reading this welcome is the first one!

If you haven't already, read through the installation instructions included with Elgg (or click the instructions link at the bottom of the page).

If you are ready to proceed, click the Next button.

Follow configuration process:

The first screen probably will contain a success message in green and a failure message in pink:
```
Requirements check

Your server failed the requirements check. After you have fixed the below issues, refresh this
page. Check the troubleshooting links at the bottom of this page if you need further assistance.
PHP
```
Your server's PHP satisfies all of Elgg's requirements.
```
Web server
```
We think your server is running the Apache web server. The rewrite test failed and the most likely cause is that AllowOverride is not set to All for Elgg's directory. This prevents Apache from processing the .htaccess file which contains the rewrite rules. A less likely cause is Apache is configured with an alias for your Elgg directory and you need to set the RewriteBase in your .htaccess. There are further instructions in the .htaccess file in your Elgg directory.
```
Database
```
The database requirements are checked when Elgg loads its database.
To correct this, replace the .htaccess file that Elgg created with one that you can edit:
```
cp -ip .htaccess temp-htaccess
rm .htaccess
mv temp-htaccess .htaccess
```
Edit the .htaccess file: Go to approximately line 101 (where it says #RewriteBase /) and add the line:
RewriteBase /~your-user-id/elgg/alpha/
Be sure to save the edited file.
Click the Refresh button.
If this hasn't fixed things, seek professional help.
Click the Next button.

Fill in the parameters appropriate to your MySQL installation.

Database installation

If you haven't already created a database for Elgg, do that now. Then fill in the values below to
initialize the Elgg database.

Database Username

elggalphauser

User that has full priviledges to the MySQL database that you created for Elgg

Database Password

secretpassword

Password for the above database user account

Database Name

elggalpha

Name of the Elgg database

Database Host

^‡

moxie:9999

Hostname of the MySQL server (usually localhost)
‡You might need to use 127.0.0.1:9999 for the host
    if you haven't set up MySQL as we've done.



Database Table Prefix

elgg_

The prefix given to all of Elgg's tables (usually elgg_)

Continue filling in forms as requested.

Configure site

Database has been installed.

We need some information about the site as we configure Elgg. If you haven't created a data directory for Elgg, you need to do so now.

Site Name

My Elgg Site version Alpha

The name of your new Elgg site

Site Email Address

your-user-id@oswego.edu

Email address used by Elgg for communication with users

Site URL

http://moxie.cs.oswego.edu/~your-user-id/elgg/alpha/

The address of the site (Elgg usually guesses this correctly)

Elgg Install Directory

/home/your-user-id/public_html/elgg/elgg.1.8.0.1/

The directory where you put the Elgg code (Elgg usually guesses this correctly)

Data Directory

/home/your-user-id/elgg/alpha/data

The directory that you created for Elgg to save files (the permissions on this directory are checked
when you click Next)

Default Site Access

Public

The default access level for new user created content

Create admin account

Site settings have been saved.

It is now time to create an administrator's account.

Display Name

The name that is displayed on the site for this account

Email Address

Username

Account username used for logging in

Password

Account password must be at least 6 characters long

Password Again

Retype password to confirm

dbCAN: a web server and DataBase for automated Carbohydrate-active enzyme ANnotation

Jit — Mon, 29 May 2017 05:39:29 -0500

dbCAN is a web server and DataBase for automated Carbohydrate-active enzyme ANnotation, funded by the BioEnergy Science Center of the DOE. Similar resources on the web include CAZy database and CAT. All data in dbCAN are generated based on the family classification from CAZy database while it has the following unique features compared with CAZy database and CAT:

dbCAN provides the capability of automated and comprehensive CAZyme annotation of a given genome submitted by the user;
dbCAN provides an explicitly defined signature domain for each and every CAZyme family along with its location in all the relevant full-length CAZyme proteins in all sequenced genomes;
dbCAN provides the most complete set of metagenomic CAZyme genes published so far and represents the first step towards discovering novel CAZyme catalysts in metagenomes;
dbCAN provides a subfamily classification of the existing CAZyme families based on sequence similarities;
dbCAN make all pre-computed data freely available to the public, including sequence alignments, hidden markov models (HMMs) and phylogenies of the signature domain regions in each and every CAZyme family and subfamily.

dbCAN is updated regularly when CAZy database created new families based on latest literature.

Address of the bookmark: http://csbl.bmb.uga.edu/dbCAN/index.php

BUSCA: an integrative web server to predict subcellular localization of proteins

BioStar — Thu, 07 Feb 2019 14:08:11 -0600

BUSCA (Bologna Unified Subcellular Component Annotator) is a web-server for predicting protein subcellular localization. BUSCA integrates different tools to predict localization-related protein features (DeepSig, TPpred3, PredGPI and ENSEMBLE3.0) as well as tools for discriminating subcellular localization of both globular and membrane proteins (BaCelLo, MemLoci and SChloro).

Address of the bookmark: http://busca.biocomp.unibo.it/

CSAR-web: a web server of contig scaffolding using algebraic rearrangements

BioStar — Fri, 10 Apr 2020 04:39:36 -0500

CSAR-web is a web-based tool that allows the users to efficiently and accurately scaffold (i.e. order and orient) the contigs of a target draft genome based on a complete or incomplete reference genome from a related organism.

CSAR-web can serve as a convenient and useful scaffolding tool allowing the users to efficiently and accurately scaffold their draft genomes according to a complete or incomplete reference genome.

Address of the bookmark: http://genome.cs.nthu.edu.tw/CSAR-web