BOL: Related items

KAU Thrissur Biotech/Bioinformatics RA/SRF/JRF/Trainee/Studentships

Fri, 26 Sep 2014 20:07:28 -0500

Applications are invited from eligible candidates for the following posts at Bioinformatics Centre (DIC), IT- BT Complex, College of Horticulture, Kerala Agricultural University, Vellanikkara, Thrissur.

1. Research Associate
Emoluments*: 14880/- + HRA
Qualification needed: Ph.D/M.Sc in Bioinformatics or Ph.D/M.Sc in Agriculture or Biotechnology with advanced Diploma in Bioinformatics
Desirable: 2 year experience in Bioinformatics.

2 Senior Research Fellow
Emoluments*: 10230/-
Qualification needed: M.Sc/ M.tech in Bioinformatics or M.Sc in Agriculture/ Biotechnology with Diploma in Bioinformatics.
Desirable: One year experience in Bioinformatics

3 Junior Research Fellow
Emoluments*: 9300/-
Qualification needed: M.Sc/ M.tech in Bioinformatics or M.Sc in Agriculture/Biotechnology/Plant Sciences with Diploma in Bioinformatics.

4 .Trainee/Studentship Bioinformatics
Emoluments*: 5000/-
Qualification needed: M.Sc in Bioinformatics with good knowledge of Bioinformatics softwares and tools.

5 Trainee/ Studentship Biotechnology
Emoluments*: 5000/-
Qualification needed: M.Sc in Biotechnology, with working knowledge in tissue culture, molecular markers and cloning of genes.

Candidates with the required qualifications and experience may give an application in the prescribed format with attested copies of certificates to prove eligibility on or before 30th November 2014. The applications are to be addressed to The Associate Dean, College of Horticulture and send to "Professor & Coordinator, Bioinformatics Centre (DIC), IT-BT Complex, Kerala Agricultural University, Vellanikkara, Thrissur, Kerala 680 656”. The envelope may be superscribed “Application for the post at Bioinformatics Centre”.

*Emoluments are likely to be revised in 2014-2015

More at http://www.kaubic.in/downloads/Notification_bic.pdf
http://www.kaubic.in/downloads/Application%20form.pdf

The Human Genome Project Video 3D Animation Introduction Low)

Sat, 24 Aug 2013 19:01:19 -0500

Webinar on 'An integrated RNA and DNA approach to unravel genetic regulation in cancer'

Yeshodari — Wed, 11 Feb 2015 04:59:57 -0600

Webinar on 'An integrated RNA and DNA approach to unravel genetic regulation in cancer'

Abstract

Whole exome DNA sequencing (WES) or whole genome DNA sequencing (WGS) allows detection of mutations and polymorphisms in all exonic and genomic regions, respectively, while messenger RNA sequencing (RNA-Seq) enables quantitative analysis of gene expression. Mutations in the genome result in diverse transcriptional aberrations that can be missed in a stand-alone WES/WGS analysis. An integration of DNA variant analysis and RNA-Seq analysis enables one to investigate the consequences of genomic changes in the RNA transcripts including germline and somatic changes, imprinting, RNA editing and allele specific expression (ASE). In this webinar, we will demonstrate this integrated approach using Strand NGS to identify high confidence mutations, RNA editing events and ASE in cancer.

Webinar Details

Sessions	San Francisco Time (PST)	Tokyo Time (GMT+09:00)	Berlin Time (GMT+01:00)	Mumbai Time (GMT+05:30)
Session 1	25 Feb 12:30 AM	25 Feb 5:30 PM	25 Feb 9:30 AM	25 Feb 2:00 PM
Session 2	25 Feb 9:00 AM	26 Feb 2:00 AM	25 Feb 6:00 PM	25 Feb 10:30 PM

Register here: http://www.strand-ngs.com/webinar_registration

About Speaker:

Dr. Veena Hedatale, has a PhD in Plant Genetics from The Radboud University, Netherlands focused on meiosis and recombination. Her prior academic experience at Cornell University was on genetic mapping and gene transformation in Rice. She has worked with Monsanto, and contributed to data mining, database development as well as gene/promoter/pathway discovery for traits related to yield and stress in crop species. At Strand, Veena has worked on Pharmacogenomic analysis of targets and Gene family analysis projects. Currently, she is part of the Strand NGS Application Science team and is involved in the analysis of next generation sequencing data.

Please feel free to contact us 24/5, for availing free online training or if you have any questions.

Email: sales@strandngs.com

Phone (USA): 1-800-752-9122

Phone (ROW): +1-650-353-5060

Software developed in pevsner lab

Robert M Willioms — Mon, 06 Oct 2014 12:41:26 -0500

DRAGON: Database Referencing of Array Genes Online

SNOMAD: Standardization and Normalization of Microarray Data

SNPduo: SNP Analysis Between Two Individuals

SNPtrio: Analyzing and Visualizing and Inheritance Patterns in Trios

SNPscan: Data Analysis and Visualization of SNP Data

pediSNP: Analyze SNP Data From a Pedigree of Two Generations

kcoeff: Calculate Cotterman Coefficients of SNP Genotype Data

triPOD: Detects chromosomal abnormalities in parent-child trio-based microarray data

Address of the bookmark: http://pevsnerlab.kennedykrieger.org/php/?q=software

Live Webinar on RNA-Seq Data Analysis on 9 Nov 2016

Strand — Wed, 19 Oct 2016 05:25:27 -0500

Live Webinar on RNA-Seq Data Analysis

Abstract: Strand NGS supports an extensive workflow for the analysis and visualization of RNA-Seq data. The workflow includes Transcriptome / Genome alignment, Differential expression analysis with Statistical approach and Splicing events detection. Strand NGS also supports novel discovery like identification of novel genes, exons and Novel splice junctions, alongside it can also detect gene fusion events. Further downstream analysis such as GO and pathway analysis can be performed on the set of interesting genes. The product has an option to create pipelines for time consuming jobs which automates analysis and leaves more time for end data interpretation. This webinar will give an overview of the features in the RNA-Seq data analysis workflow in Strand NGS and also highlights on parameters within each feature that can be optimized depending on datasets and analysis needs.

Speaker: Mr. Sugandan Sivamani, Senior Application Scientist, Strand Life Sciences

Date: 9th Nov, Session 1 for SAPK/ APFO: 2:30 PM IST Date: 9th Nov, Session 2 for AFO/ EMEA: 9:00 AM PST

Quick next generation sequencing (NGS) terms definition

Neel — Fri, 09 Jun 2017 04:52:26 -0500

fragment size: the Illumina WGS protocol generates paired-end reads from both ends of longer fragments. The lengths of these fragments are assumed to be sampled from a normal distribution. Therefore, in the absence of structural variants, mapping locations of the paired ends span within an interval [δmin,δmax]. Most (>90%) of paired-end reads are sampled from no-SV regions, therefore the fragment size distribution can be learned empirically for each WGS data set separately.

concordant reads: a read pair is called concordant if they can be mapped to the reference genome as “expected”: (a) mapped to opposing strands where the upstream read is mapped to the forward strand and the downstream read is mapped to the reverse strand2, (b) the distance between ends is between the minimum and maximum expected fragment size.

discordant reads: briefly, any non-concordant read pair is considered discordant. Note that, by definition, the discordant read pairs signal potential SVs. The sequence signature produced by these type of reads is known as read-pair signature.

split reads: a read that can only be mapped to the reference genome by breaking into two sub-reads is called a split-read. These types of reads also indicate a potential SV or a short insertion or deletion (indel).

read depth: number of reads that map within a region of the genome. Overall genome-wide read depth is also referred to as depth of coverage. It is expected that the number of reads that “cover” each base-pair to follow a Poisson distribution. Therefore, if the read depth over a certain region deviates significantly from this distribution, it signals for a potential copy number variation (CNV).

MeDuSa: a multi-draft based scaffolder

Abhimanyu Singh — Wed, 14 Feb 2018 02:49:00 -0600

MeDuSa (Multi-Draft based Scaffolder), an algorithm for genome scaffolding. MeDuSa exploits information obtained from a set of (draft or closed) genomes from related organisms to determine the correct order and orientation of the contigs. MeDuSa formalises the scaffolding problem by means of a combinatorial optimisation formulation on graphs and implements an efficient constant factor approximation algorithm to solve it. In contrast to currently used scaffolders, it does not require either prior knowledge on the microrganisms dataset under analysis (e.g. their phylogenetic relationships) or the availability of paired end read libraries.

Address of the bookmark: https://github.com/combogenomics/medusa

Ranbow: a haplotype assembler for polyploid genomes

Jit — Fri, 01 Jun 2018 07:21:54 -0500

Ranbow is a haplotype assembler for polyploid genomes. It has been developed for the haplotype assembly of the hexaploid sweet potato genome, which is highly heterozygous. Ranbow can also be applied to other polyploid genomes. After a first phasing, Ranbow utilizes the assembled haplotypes to improve the accuracy of variant calling results and to infer the evolutionary history of the organism´s genome. Ranbow has three main modes of function: ranbow hap: for haplotyping ranbow eval: for evaluating of the assemble haplotypes by gold standard (long) reads ranbow phylo: for the phylogenetic analysis

Address of the bookmark: https://www.molgen.mpg.de/ranbow

Installing Salmon for Trinity !

Rahul Nayak — Tue, 03 Jul 2018 09:02:29 -0500

➜ trinityrnaseq-Trinity-v2.6.6 git:(master) ✗ conda install salmon
Solving environment: done

## Package Plan ##

environment location: /home/urbe/anaconda3

added / updated specs:
- salmon

The following packages will be downloaded:

package | build
---------------------------|-----------------
boost-1.64.0 | py36_4 331 KB conda-forge
jemalloc-5.1.0 | hfc679d8_0 8.2 MB conda-forge
boost-cpp-1.64.0 | 1 17.8 MB conda-forge
salmon-0.10.2 | 1 3.7 MB bioconda
conda-4.5.5 | py36_0 624 KB conda-forge
tbb-2018_20171205 | 0 1.2 MB conda-forge
------------------------------------------------------------
Total: 31.8 MB

The following NEW packages will be INSTALLED:

boost: 1.64.0-py36_4 conda-forge
boost-cpp: 1.64.0-1 conda-forge
jemalloc: 5.1.0-hfc679d8_0 conda-forge
salmon: 0.10.2-1 bioconda
tbb: 2018_20171205-0 conda-forge

The following packages will be UPDATED:

conda: 4.5.4-py36_0 conda-forge --> 4.5.5-py36_0 conda-forge

Proceed ([y]/n)? y

Downloading and Extracting Packages
boost-1.64.0 | 331 KB | ####################################################################################################################################### | 100%
jemalloc-5.1.0 | 8.2 MB | ####################################################################################################################################### | 100%
boost-cpp-1.64.0 | 17.8 MB | ####################################################################################################################################### | 100%
salmon-0.10.2 | 3.7 MB | ####################################################################################################################################### | 100%
conda-4.5.5 | 624 KB | ####################################################################################################################################### | 100%
tbb-2018_20171205 | 1.2 MB | ####################################################################################################################################### | 100%
Preparing transaction: done
Verifying transaction: done
Executing transaction: done

nanofilt: Filtering and trimming of long read sequencing data

Jit — Mon, 30 Jul 2018 12:01:52 -0500

Filtering on quality and/or read length, and optional trimming after passing filters.
Reads from stdin, writes to stdout.

Intended to be used:

directly after fastq extraction
prior to mapping
in a stream between extraction and mapping

https://github.com/wdecoster/nanofilt

Address of the bookmark: https://github.com/wdecoster/nanofilt