BOL: Related items

GenomeScope: open-source web tool to rapidly estimate the overall characteristics of a genome, including genome size, heterozygosity rate, and repeat content from unprocessed short reads

Jit — Fri, 21 Oct 2016 05:46:43 -0500

Summary: GenomeScope is an open-source web tool to rapidly estimate the overall characteristics of a genome, including genome size, heterozygosity rate, and repeat content from unprocessed short reads. These features are essential for studying genome evolution, and help to choose parameters for downstream analysis. We demonstrate its accuracy on 324 simulated and 16 real datasets with a wide range in genome sizes, heterozygosity levels, and error rates. Availability and Implementation: http://qb.cshl.edu/genomescope/, https://github.com/schatzlab/genomescope.git

Address of the bookmark: http://qb.cshl.edu/genomescope/

Statistics Using R with Biological Examples

Neel — Thu, 03 Nov 2016 04:55:41 -0500

This book is a manifestation of my desire to teach researchers in biology a bit more about statistics than an ordinary introductory course covers and to introduce the utilization of R as a tool for analyzing their data. My goal is to reach those with little or no training in higher level statistics so that they can do more of their own data analysis, communicate more with statisticians, and appreciate the great potential statistics has to offer as a tool to answer biological questions.

This is necessary in light of the increasing use of higher level statistics in biomedical research. I hope it accomplishes this mission and encourage its free distribution and use as a course text or supplement.

K Seefeld, May 2007

VICUNA: a software tool that enables consensus assembly of ultra-deep sequence derived from diverse viral or other heterogeneous populations.

biogeek — Tue, 25 Aug 2020 03:40:17 -0500

VICUNA is a de novo assembly program targeting populations with high mutation rates. It creates a single linear representation of the mixed population on which intra-host variants can be mapped. For clinical samples rich in contamination (e.g., >95%), VICUNA can leverage existing genomes, if available, to assemble only target-alike reads. After initial assembly, it can also use existing genomes to perform guided merging of contigs. For each data set (e.g., Illumina paired read, 454), VICUNA outputs consensus sequence(s) and the corresponding multiple sequence alignment of constituent reads. VICUNA efficiently handles ultra-deep sequence data with tens of thousands fold coverage.

http://software.broadinstitute.org/viral/docs/vicuna_v1.0.pdf

Address of the bookmark: https://www.broadinstitute.org/viral-genomics/vicuna

Maq: Mapping and Assembly with Quality

Jit — Tue, 22 Nov 2016 04:51:39 -0600

Maq stands for Mapping and Assembly with Quality It builds assembly by mapping short reads to reference sequences. Maq is a project hosted by SourceForge.net. The project page is available athttp://sourceforge.net/projects/maq/. Maq is previously known as mapass2.

Run Maq Now

Follow these steps to try Maq. All you need is a reference sequence file in the FASTA format.

Prepare a reference sequence (ref.fasta). Better a bacterial genome.
Download maq, maq-data and maqview at the download page.
Copy maq, maq.pl and maq_eval.pl to the $PATH or to the same directory.
Simulate diploid reference and read sequences, map reads, call variants and evaluate the results in one go:
```
maq.pl demo ref.fasta calib-30.dat
```
where calib-30.dat is contained in maq-data.

View the alignment:

cd maqdemo/easyrun;
maqindex -i -c consensus.cns all.map;
maqview -c consensus.cns all.map

Even for advanced maq users, running `maq.pl demo' is recommended. You may find something helpful.

Address of the bookmark: http://maq.sourceforge.net

PRISM

Jit — Sat, 10 Dec 2016 15:19:40 -0600

PRISM is a software for split read (reads which span across a structrual variant -- SV ) mapping and SV calling from the mapping result. PRISM is able to detect small insertions and abitrary size deletions, inversions and tandom duplications with the direction of discordant read pairs. PRISM_CTX is a tool for detecting inter-chromosome trans-location events.

PRISM and PRISM_CTX were originally designed and written by Michael Brudno and Yue Jiang, The original PRISM publication can be found here.

The authors may be contacted via e-mail at: prism at cs.toronto.edu.

Additional information is available in the PRISM README file and PRISM_CTX README file.

http://compbio.cs.toronto.edu/prism/

Address of the bookmark: http://compbio.cs.toronto.edu/prism/

MyPro: A seamless pipeline for automated prokaryotic genome assembly and annotation

Neel — Thu, 15 Dec 2016 05:47:35 -0600

MyPro is an improved genomics software pipeline for prokaryotic genomes. MyPro is user-friendly and requires minimal programming skills. High-quality prokaryotic genome assembly and annotation can be obtained with ease. It performed better than de novo assemblers and contig integration software. Produces more contiguous assemblies, higher N50 values and lower number of contigs.

More at https://sourceforge.net/projects/sb2nhri/files/MyPro/

Address of the bookmark: http://www.sciencedirect.com/science/article/pii/S0167701215001207

pyScaf

Bulbul — Mon, 19 Dec 2016 14:20:33 -0600

pyScaf orders contigs from genome assemblies utilising several types of information:

paired-end (PE) and/or mate-pair libraries (NGS-based mode)
long reads (NGS-based mode)
synteny to the genome of some related species (reference-based mode)

Scaffolding

In reference-based mode, pyScaf uses synteny to the genome of closely related species in order to order contigs and estimate distances between adjacent contigs.

Contigs are aligned globally (end-to-end) onto reference chromosomes, ignoring:

matches not satisfying cut-offs (--identity and --overlap)
suboptimal matches (only best match of each query to reference is kept)
and removing overlapping matches on reference.

In preliminary tests, pyScaf performed superbly on simulated heterozygous genomes based on C. parapsilosis (13 Mb; CANPA) and A. thaliana (119 Mb; ARATH) chromosomes, reconstructing correctly all chromosomes always for CANPA and nearly always for ARATH (Figures in dropbox, CANPA table, ARATH table).
Runs took ~0.5 min for CANPA on 4 CPUs and ~2 min for ARATH on 16 CPUs.

Important remarks:

Reduce your assembly before (fasta2homozygous.py) as any redundancy will likely break the synteny.
pyScaf works better with contigs than scaffolds, as scaffolds are often affected by mis-assemblies (no de novo assembler / scaffolder is perfect...), which breaks synteny.
pyScaf works very well if divergence between reference genome and assembled contigs is below 20% at nucleotide level.
pyScaf deals with large rearrangements ie. deletions, insertion, inversions, translocations. Note however, this is experimental implementation!
Consider closing gaps after scaffolding.

Address of the bookmark: https://github.com/lpryszcz/pyScaf

CISA: Contig Integrator for Sequence Assembly

Neel — Thu, 15 Dec 2016 05:42:21 -0600

A plethora of algorithmic assemblers have been proposed for the de novo assembly of genomes, however, no individual assembler guarantees the optimal assembly for diverse species. Optimizing various parameters in an assembler is often performed in order to generate the most optimal assembly. However, few efforts have been pursued to take advantage of multiple assemblies to yield an assembly of high accuracy. In this study, we employ various state-of-the-art assemblers to generate different sets of contigs for bacterial genomes. A tool, named CISA, has been developed to integrate the assemblies into a hybrid set of contigs, resulting in assemblies of superior contiguity and accuracy, compared with the assemblies generated by the state-of-the-art assemblers and the hybrid assemblies merged by existing tools. This tool is implemented in Python and requires MUMmer and BLAST+ to be installed on the local machine. The source code of CISA and examples of its use are available at http://sb.nhri.org.tw/CISA/.

Address of the bookmark: http://sb.nhri.org.tw/CISA/en/CISA

sockeye

Jit — Fri, 17 Feb 2017 08:51:16 -0600

This sockeye software uses the Ensembl database project to import sequence and annotation information from several eukaryotic species. A user can additionally import their own custom sequence and annotation data. Individual annotation objects are displayed in Sockeye by using custom 3D models. Ensembl-derived and imported sequences can be analyzed by using a suite of multiple and pair-wise alignment algorithms. The results of these comparative analyses are also displayed in the 3D environment of Sockeye. By using the Java3D API to visualize genomic data in a 3D environment, we are able to compactly display cross-sequence comparisons. This provides the user with a novel platform for visualizing and comparing genomic feature organization.

Address of the bookmark: http://www.bcgsc.ca/platform/bioinfo/software/sockeye/releases/1.3

HivePlot

Jit — Thu, 16 Feb 2017 11:39:34 -0600

The hive plot is a rational visualization method for drawing networks. Nodes are mapped to and positioned on radially distributed linear axes — this mapping is based on network structural properties. Edges are drawn as curved links. Simple and interpretable.

The purpose of the hive plot is to establish a new baseline for visualization of large networks — a method that is both general and tunable and useful as a starting point in visually exploring network structure.

More at http://www.hiveplot.com/

Address of the bookmark: http://www.hiveplot.com/