BOL: Related items

The 8000 years old Tibetian gene mutation !!!

Neel — Wed, 20 Aug 2014 21:57:44 -0500

A new study has provided insight into how gene mutation around 8,000 years ago helped Tibetans' to survive in the thin air on the Tibetan Plateau, where an average elevation is of 14,800 feet.

A study led by University of Utah scientists is the first to find a genetic cause for the adaptation, a single DNA base pair change that dates back 8,000 years and demonstrate how it contributes to the Tibetans' ability to live in low oxygen conditions.

About 8,000 years ago, the gene EGLN1 changed by a single DNA base pair. Today, a relatively short time later on the scale of human history, 88 percent of Tibetans have the genetic variation, and it was virtually absent from closely related lowland Asians. The findings indicate the genetic variation endows its carriers with an advantage.

In those without the adaptation, low oxygen caused their blood to become thick with oxygen-carrying red blood cells, an attempt to feed starved tissues, which could cause long-term complications such as heart failure. The researchers found that the newly identified genetic variation protected Tibetans by decreasing the over-response to low oxygen.

Reference: http://www.nature.com/nature/journal/v512/n7513/abs/nature13408.html

MashMap: a fast and approximate software for mapping long reads (PacBio/ONT) or assembly to reference genome(s)

Jit — Tue, 12 Dec 2017 17:23:31 -0600

MashMap is a fast and approximate software for mapping long reads (PacBio/ONT) or assembly to reference genome(s). It maps a query sequence against a reference region if and only if its estimated alignment identity is above a specified threshold. It does not compute the alignments explicitly, but rather estimates a k-mer based Jaccard similarity using a combination of Winnowing and MinHash. This is then converted to an estimate of sequence identity using the Mash distance. An appropriate k-mer sampling rate is automatically determined given minimum local alignment length and identity thresholds. The efficiency of the algorithm improves as both of these thresholds are increased.

Address of the bookmark: https://github.com/marbl/MashMap

List of non-commercial NGS genotype-calling software

Jit — Thu, 09 Aug 2018 04:21:32 -0500

Meaningful analysis of next-generation sequencing (NGS) data, which are produced extensively by genetics and genomics studies, relies crucially on the accurate calling of SNPs and genotypes. Recently developed statistical methods both improve and quantify the considerable uncertainty associated with genotype calling, and will especially benefit the growing number of studies using low- to medium-coverage data.

A list of programs for genotype and SNP calling :

SOAP2 http://soap.genomics.org.cn/index.html

Single-sample High-quality variant database (for example, dbSNP) Package for NGS data analysis, which includes a single individual genotype caller (SOAPsnp)

realSFS http://128.32.118.212/thorfinn/realSFS/

Single-sample Aligned reads Software for SNP and genotype calling using single individuals and allele frequencies. Site frequency spectrum (SFS) estimation

Samtools http://samtools.sourceforge.net/

Multi-sample Aligned reads Package for manipulation of NGS alignments, which includes a computation of genotype likelihoods (samtools) and SNP and genotype calling (bcftools)

GATK http://www.broadinstitute.org/gsa/wiki/index.php/The_Genome_Analysis_Toolkit Multi-sample Aligned reads Package for aligned NGS data analysis, which includes a SNP and genotype caller (Unifed Genotyper), SNP filtering (Variant Filtration) and SNP quality recalibration (Variant Recalibrator)

Beagle http://faculty.washington.edu/browning/beagle/beagle.html

Multi-sample LD Candidate SNPs, genotype likelihoods Software for imputation, phasing and association that includes a mode for genotype calling

IMPUTE2 http://mathgen.stats.ox.ac.uk/impute/impute_v2.html

Multi-sample LD Candidate SNPs, genotype likelihoods Software for imputation and phasing, including a mode for genotype calling. Requires fine-scale linkage map

QCall ftp://ftp.sanger.ac.uk/pub/rd/QCALL

Multi-sample LD ‘Feasible’ genealogies at a dense set of loci, genotype likelihoods Software for SNP and genotype calling, including a method for generating candidate SNPs without LD information (NLDA) and a method for incorporating LD information (LDA). The ‘feasible’ genealogies can be generated using Margarita (http://www.sanger.ac.uk/resources/software/margarita)

MaCH http://genome.sph.umich.edu/wiki/Thunder

Multi-sample LD Genotype likelihoods Software for SNP and genotype calling, including a method (GPT_Freq) for generating candidate SNPs without LD information and a method (thunder_glf_freq) for incorporating LD information

OrthoANI: An improved algorithm and software for calculating average nucleotide identity

Abhimanyu Singh — Wed, 12 Dec 2018 08:36:08 -0600

OAT uses OrthoANI to measure the overall similarity between two genome sequences. ANI and OrthoANI are comparable algorithms: they share the same species demarcation cut-off at 95~96% and large comparison studies have demonstrated both algorithms to produce near identical reciprocal similarities. Details of the OrthoANI algorithm is given in (Lee et al. 2015). OAT employs an easy-to-follow Graphical User Interface that allow researchers to calculate OrthoANI values between genomes of interest without unfamiliar Command Line Environments. Moreover, the OAT_cmd command-line software can be integrated into preexisting bioinformatics pipelines.

Address of the bookmark: https://www.ezbiocloud.net/tools/orthoani

IQ-TREE: Efficient software for phylogenomic inference

Jit — Mon, 18 Feb 2019 04:25:11 -0600

A fast and effective stochastic algorithm to infer phylogenetic trees by maximum likelihood. IQ-TREE compares favorably to RAxML and PhyML in terms of likelihoods with similar computing time

IQ-TREE found higher likelihoods between 62.2% and 87.1% of the studied alignments, thus efficiently exploring the tree-space. If we use the IQ-TREE stopping rule, RAxML and PhyML are faster in 75.7% and 47.1% of the DNA alignments and 42.2% and 100% of the protein alignments, respectively. However, the range of obtaining higher likelihoods with IQ-TREE improves to 73.3–97.1%. IQ-TREE is freely available at http://www.cibiv.at/software/iqtree

Address of the bookmark: http://www.iqtree.org/

DnaSP: DNA Sequence Polymorphism, is a software package for the analysis of DNA polymorphisms

Neel — Wed, 25 Nov 2020 19:51:38 -0600

DnaSP, DNA Sequence Polymorphism, is a software package for the analysis of DNA polymorphisms using data from a single locus (a multiple sequence aligned -MSA data), or from several loci (a Multiple-MSA data, such as formats generated by some assembler RAD-seq software). DnaSP can estimate several measures of DNA sequence variation within and between populations in noncoding, synonymous or nonsynonymous sites, or in various sorts of codon positions), as well as linkage disequilibrium, recombination, gene flow and gene conversion parameters.

Address of the bookmark: http://www.ub.edu/dnasp/

GrapheR !!!

John Parker — Thu, 14 Aug 2014 14:02:17 -0500

What a wonderful gem GrapheR is.... Oh yes it is. GrapheR is a GUI for base graphics in R by http://www.maximeherve.com/. The package provides a graphical user interface for creating base charts in R. It is ideal for beginners in R, as the user interface is very clear and the code is written along side into a text file, allowing users to recreate the charts directly in the console.

Adding and changing legends? Messing around with the plotting window settings? It is much easier/quicker with this GUI than reading the help file and trying to understand the various parameters.
Here is a little example using the iris data set.

library(GrapheR)
data(iris)
run.GrapheR()

This will bring up a window that helps me to create the chart and tweak the various parameters.

Finally, I find the underlying R code in a file created by GrapheR. For more details read also the package vignette, which is available in English, French and German!

GenomeTools: The versatile open source genome analysis software

Neel — Wed, 02 Feb 2022 04:00:21 -0600

The GenomeTools genome analysis system is a free collection of bioinformatics tools (in the realm of genome informatics) combined into a single binary named gt. It is based on a C library named “libgenometools” which consists of several modules.

If you are interested in gene prediction, have a look at GenomeThreader.

http://genometools.org/pub/

Address of the bookmark: http://genometools.org/

pybedtools

Shruti Paniwala — Wed, 20 Aug 2014 01:03:41 -0500

pybedtools is a Python wrapper for Aaron Quinlan's BEDtools programs (https://github.com/arq5x/bedtools), which are widely used for genomic interval manipulation or "genome algebra". pybedtools extends BEDTools by offering feature-level manipulations from with Python. See full online documentation, including installation instructions, at http://pythonhosted.org/pybedtools/.

More at http://pythonhosted.org/pybedtools/

A powerful toolset for genome arithmetic.http://code.google.com/p/bedtools/

CGView.js is a Circular Genome Viewing tool

LEGE — Wed, 27 Mar 2024 11:16:24 -0500

CGView.js is a Circular Genome Viewing tool for visualizing and interacting with small genomes. This software is an adaptation of the Java program CGView.

CGView.js is the genome viewer of Proksee, an expert system for genome assembly, annotation and visualization.

Features

Circular and linear views of genomes
Capable of drawing genomes up to 10 Mbp with 1000's of features and 100's contigs
Smooth zooming down to the sequence level
Easily generate features and plots directly form the sequence (e.g. ORFs, GC-content and GC-Skew)
Save high resolution PNG maps up to 8000x8000px
Fully documented API for interacting with CGView.js maps

Address of the bookmark: https://js.cgview.ca/