https://www.forbes.com/sites/jasonevangelho/2018/07/23/5-reasons-you-should-switch-from-windows-to-linux-right-now/#70c74923777b

The following table shows SLURM commands on the SOE cluster.

For more information, run man on the commands above. See some examples below.

1. Info about the partitions and nodes
List all the partitions available to you and the nodes therein:

sinfo

Nodes in state idle can accept new jobs.

Show a partition configuratuin, for example, SOE_main

scontrol show partition=SOE_main

Show current info about a specific node:

scontrol show node=<nodename>

You can also specify a group of nodes in the command above. For example, if your MPI job is running across soenode05,06,35,36, you can execute the command below to get the info on the nodes you are interested in:

scontrol show node=soenode[05-06,35-36]

An informative parameter in the output to look at would be CPULoad. It allows you to see how your application utilizes the CPUs on the running nodes.

2. Submit scripts
The header in a submit script specifies job name, partition (queue), time limit, memory allocation, number of nodes, number of cores, and files to collect standard output and error at run time, for example

#!/bin/bash

#SBATCH --job-name=OMP_run     # job name, "OMP_run"
#SBATCH --partition=SOE_main   # partition (queue)
#SBATCH -t 0-2:00              # time limit: (D-HH:MM) 
#SBATCH --mem=32000            # memory per node in MB 
#SBATCH --nodes=1              # number of nodes
#SBATCH --ntasks-per-node=16   # number of cores
#SBATCH --output=slurm.out     # file to collect standard output
#SBATCH --error=slurm.err      # file to collect standard errors

If the time limit is not specified in the submit script, SLURM will assign the default run time, 3 days. This means the job will be terminated by SLURM in 72 hrs. The maximum allowed run time is two weeks, 14-0:00.
If the memory limit is not requested, SLURM will assign the default 16 GB. The maximum allowed memory per node is 128 GB. To see how much RAM per node your job is using, you can run commands sacct or sstat to query MaxRSS for the job on the node - see examples below.
Depending on a type of application you need to run, the submit script may contain commands to create a temporary space on a computational node - see the discussion about using the file systems on the cluster.
Then it sets the environment specific to the application and starts the application on one or multiple nodes - see sbatch sample scripts in directory /usr/local/Samples on soemaster1.hpc.rutgers.edu.
You can submit your job to the cluster with sbatch command:

sbatch myscript.sh

3. Query job information
List all currently submitted jobs in running and pending states for a user:

squeue -u <username>

Command squeue can be run with format options to expose specific information, for example, when pending job #706 is scheduled to start running:

squeue -j 706 --format="%S"

START_TIME
2015-04-30T09:54:32

More info can be shown by placing additional format options, for example:

squeue -j 706 --format="%i %P %j %u %T %l %C %S"

JOBID PARTITION   NAME    USER STATE   TIMELIMIT  CPUS START_TIME
706   SOE_main  Par_job_3 mike PENDING 3-00:00:00 64   2015-04-30T09:54:32

To see when all the jobs, pending in the queue, are scheduled to start:

squeue --start 

List all running and completed jobs for a user

sqlog -u <username>

or

sqlog -j <JobID>

The following appreviations are used for the job states:

       CA   CANCELLED      Job was cancelled.

       CD   COMPLETED      Job completed normally.

       CG   COMPLETING     Job is in the process of completing.

       F    FAILED         Job termined abnormally.

       NF   NODE_FAIL      Job terminated due to node failure.

       PD   PENDING        Job is pending allocation.

       R    RUNNING        Job currently has an allocation.

       S    SUSPENDED      Job is suspended.

       TO   TIMEOUT        Job terminated upon reaching its time limit.

You can specify the fields you would like to see in the output of sqlog:

sqlog --format=list

The command below, for example, provides Job ID, user name, exit state, start date-time, and end date-time for job #2831:

sqlog -j 2831 --format=jid,user,state,start,end

List status info for a currently running job:

sstat -j <jobid>

A formatted output can be used to gain only a specific info, for example, the maximum resident RAM usage on a node:

sstat --format="JobID,MaxRSS" -j <jobid>

To get statistics on completed jobs by jobID:

sacct --format="JobID,JobName,MaxRSS,Elapsed" -j <jobid>

To view the same information for all jobs of a user:

sacct --format="JobID,JobName,MaxRSS,Elapsed" -u <username>

To print a list of fields that can be specified with the --format option:

sacct --helpformat

For example, to get Job ID, Job name, Exit state, start date-time, and end date-time for job #2831:

sacct -j 2831 --format="JobID,JobName,State,Start,End"

Another useful command to gain information about a running job is scontrol:

scontrol show job=<jobid>

4. Cancel a job
To cancel one job:

scancel <jobid>

To cancel one job and delete the TMP directory created by the submit script on a node:

sdel <jobid>

To cancel all the jobs for a user:

scancel -u <username>

To cancel one or more jobs by name:

scancel --name <myJobName>

Check out the changes they made.

They added the cleanup-blastdb-volumes.py script to remove unused BLAST database volumes. Read the documentation here.

They also switched the protocol from ftp to https to access BLAST databases for increased performance and reliability when downloading data from the NCBI with the update_blastdb.pl script.

And fixed a few bugs related to downloading data from the NCBI, and mt_mode crashing blastn and blastx.

Check out the release notes.

Download BLAST+ 2.14.1

Questions or comments? Please write the BLAST help desk.

More info and download: https://blast.ncbi.nlm.nih.gov/doc/blast-news/2023-BLAST-News.html

https://www.nature.com/articles/nmeth.4556

Address of the bookmark: https://github.com/ryanlayer/giggle

Address of the bookmark: https://github.com/soedinglab/MMseqs2

• FracMinHash sketching, which enables accurate comparisons (including ANI) between data sets of different sizes
• sourmash gather, a combinatorial k-mer approach for more accurate metagenomic profiling

Please see the sourmash publications for details.

The name is a riff off of Mash, combined with @ctb's love of whiskey. (Sour mash is used in making whiskey.)

Maintainers: C. Titus Brown (@ctb), Luiz C. Irber, Jr (@luizirber), and N. Tessa Pierce-Ward (@bluegenes).

sourmash was initially developed by the Lab for Data-Intensive Biology at the UC Davis School of Veterinary Medicine, and now includes contributions from the global research and developer community.

Address of the bookmark: https://github.com/sourmash-bio/sourmash

The vital metaphase stage of cell division, when the sister chromatids migrated to the centre and lined up in a row, and pulled apart using attached microtubules in such a way that half the DNA ends up in each daughter cell. However, before the mitotic spindle‐mediated movement gets start and pulled DNA apart, the chromosomes are free to undergo recombination which involves the exchange of genetic material either between multiple chromosomes or between different regions of the same chromosome.

During recombination, the precise breakage of each strand, exchange between the strands, and sealing of the resulting recombined molecules happens. The “chromosomal breakpoints” refers to these places where they break. Mostly, this process occurs with a high degree of accuracy at high frequency in both eukaryotic and prokaryotic cells. But occasionally this “break and sealing/ break and reattach” process goes wrong and the reattachment happens in the wrong place which usually create disaster (with few exceptions).These chromosome disaster or abnormalities involve the gain, loss or rearrangement of visible amounts of genetic material during cell division. These abnormalities are of two type, the first one is numerical abnormalities  where severe disorders are caused by the loss or gain of whole chromosomes, which affect the copy number of hundreds or even thousands of genes. The second are structural abnormalities which can be unbalanced or balanced. The former are similar to numerical abnormalities in that genetic material is either gained or lost. The natural defects in chromosome segregation are linked to cancer and several genetic diseases (http://en.wikipedia.org/wiki/List_of_genetic_disorders). Therefore, the enzymes involved in regulating cell division are still the attractive drug targets for many diseases.

Apart from certain chromosome abnormalities, these “crossing over” of segments of maternal and paternal chromosomes to form hybrid chromosomes have some evolutionary importance and considered as a driver of genetic variation. Moreover, the chromosome breakage in evolution is considered to be non-random in nature(http://www.ploscompbiol.org/article/info%3Adoi%2F10.1371%2Fjournal.pcbi.0020014). In addition the study of breakpoint regions and non-breakpoint (stable) regions of chromosomes indicates both the regions evolved in distinctly different ways ( http://www.ncbi.nlm.nih.gov/pmc/articles/PMC2675965/). These breakage may lead to genetic diseases or participate to chromosomal rearranmgnets and contributed in development of new species.

I will try to explain the genome hotspots/Evolutionary Breakpoint Regions(EBRs)/fragile regions/weak fragments/  in my next blog.

Software for recombination detection:

RAT http://cbr.jic.ac.uk/dicks/software/RAT/

Breakpointer https://github.com/ruping/Breakpointer

DRP http://web.cbio.uct.ac.za/~darren/rdp.html

RB-finder http://www.ncbi.nlm.nih.gov/pubmed/18707535

LDhat2.0 http://ldhat.sourceforge.net/LDhat2.0/instructions.shtml

Reference:

http://www.nature.com/scitable/topicpage/genetic-recombination-514#

Image: Wikipedia , sciencelearn.org.nz

Recommended Articles:

http://www.friendshipcircle.org/blog/2012/05/22/13-chromosomal-disorders-youve-never-heard-of/

http://web.udl.es/usuaris/e4650869/docencia/segoncicle/genclin98/recursos_classe_%28pdf%29/revisionsPDF/chromosyndromes.pdf

http://www.ncbi.nlm.nih.gov/pmc/articles/PMC2775595/table/T2/

http://learn.genetics.utah.edu/content/disorders/chromosomal/

http://www.ncert.nic.in/html/learning_basket/biology/cc&cd.pdf

Orange Bioinformatics provides access to publicly available data, like GEO data sets, Biomart, GO, KEGG, Atlas, ArrayExpress, and PIPAx database. As for the analytics, there is gene selection, quality control, scoring distances between experiments with multiple factors. All features can be combined with powerful visualization, network exploration and data mining techniques from the Orange data mining framework.

Address of the bookmark: https://pypi.python.org/pypi/Orange-Bioinformatics/2.5.34

Qualified and interested candidates can send their curriculum vitae by e-mail to hr@drils.org on or before 27th October 2014 mention in the subject line of the mail the following code: AMPK-Biology.

Selected candidates will be called for a personal interview to Dr. Reddy’s Institute of Life Sciences, University of Hyderabad Campus, Gachibowli, Hyderabad. The selected candidate is expected to report within two weeks from the date of selection to start work on the project.

Junior Research Fellowship (Molecular Modeling/Biology) for two years and Senior Research fellowship for one year

Junior Research Fellowship: Rs. 15,600/- (consolidated) per month for first two years.
Senior Research Fellowship: Rs. 18,200/-(consolidated) per month for the 3rd year.

Duration: The duration of the fellowship is for three years. However, the performance of the candidate will be reviewed after the completion of every year and the fellowship will be renewed only upon satisfactory performance.

Responsibilities:

1) Literature search.
2) Design, plan and execute experiments under the supervision of the scientist.
3) Provide scientific support to the scientist in his/her research activities.
4) Book keeping and maintenance of stocks and consumables.

Essential Qualifications:

Required: M.Sc. in Microbiology/Biotechnology/Bioinformatics or any other related branch of basic Sciences from a recognized university/institute with a consistent academic record of minimum 60% aggregate in all qualifying examinations. The candidate should be NET qualified for lectureship. The candidate should be motivated to work with dedication.

Desirable: expertise/experience in both Molecular Modeling and Molecular Biology.

Experience: 0-2 years in the areas of Molecular Modeling and/or Molecular Biology and cell biology and Biochemistry.

Preferable: Relevant research experience as evident from thesis/dissertation/project work.

Advertisement: http://www.ilsresearch.org/userfiles/Junior%20REsearch%20Fellowship%20-%20AMPK(Biology).pdf

Responsibilities

Lead teams of scientists in structuring, prototyping, and executing large-scale bioinformatic and other analysis.
Develop novel bioinformatics, statistical, data processing, pathway, data mining and other algorithms to identify biological signals and their clinical correlates in broad kinds of individual and population data.
Develop novel platform-level analytical tools for sequence-based assays (assembly, annotation, variant calling and interpretation, phasing, genome structure, etc.), expression assays (RNAseq and microarray), proteomics, and metabolomics.
Develop statistical models that robustly correlate complex laboratory-derived information with phenotypic and clinical information.
Create scientifically rigorous visualizations, communications, and presentations of results.

Reference @ https://www.google.com/about/careers/search#!t=jo&jid=62095001