Qualified and interested candidates can send their curriculum vitae by e-mail to hr@drils.org on or before 27th October 2014 mention in the subject line of the mail the following code: AMPK-Biology.

Selected candidates will be called for a personal interview to Dr. Reddy’s Institute of Life Sciences, University of Hyderabad Campus, Gachibowli, Hyderabad. The selected candidate is expected to report within two weeks from the date of selection to start work on the project.

Junior Research Fellowship (Molecular Modeling/Biology) for two years and Senior Research fellowship for one year

Junior Research Fellowship: Rs. 15,600/- (consolidated) per month for first two years.
Senior Research Fellowship: Rs. 18,200/-(consolidated) per month for the 3rd year.

Duration: The duration of the fellowship is for three years. However, the performance of the candidate will be reviewed after the completion of every year and the fellowship will be renewed only upon satisfactory performance.

Responsibilities:

1) Literature search.
2) Design, plan and execute experiments under the supervision of the scientist.
3) Provide scientific support to the scientist in his/her research activities.
4) Book keeping and maintenance of stocks and consumables.

Essential Qualifications:

Required: M.Sc. in Microbiology/Biotechnology/Bioinformatics or any other related branch of basic Sciences from a recognized university/institute with a consistent academic record of minimum 60% aggregate in all qualifying examinations. The candidate should be NET qualified for lectureship. The candidate should be motivated to work with dedication.

Desirable: expertise/experience in both Molecular Modeling and Molecular Biology.

Experience: 0-2 years in the areas of Molecular Modeling and/or Molecular Biology and cell biology and Biochemistry.

Preferable: Relevant research experience as evident from thesis/dissertation/project work.

Advertisement: http://www.ilsresearch.org/userfiles/Junior%20REsearch%20Fellowship%20-%20AMPK(Biology).pdf

• hist: Create an histogram of k-mer occurrences from a sequence file. Adds metadata in output for easy plotting.
• gcp: K-mer GC Processor. Creates a matrix of the number of K-mers found given a GC count and a K-mer count.
• comp: K-mer comparison tool. Creates a matrix of shared K-mers between two (or three) sequence files or hashes.
• sect: SEquence Coverage estimator Tool. Estimates the coverage of each sequence in a file using K-mers from another sequence file.
• blob: Given, reads and an assembly, calculates both the read and assembly K-mer coverage along with GC% for each sequence in the assembly.SEquence Coverage estimator Tool.
• filter: Filtering tools. Contains tools for filtering k-mer hashes and FastQ/A files:
  • kmer: Produces a k-mer hash containing only k-mers within specified coverage and GC tolerances.
  • seq: Filters a sequence file based on whether or not the sequences contain k-mers within a provided hash.
• plot: Plotting tools. Contains several plotting tools to visualise K-mer and compare distributions. The following plot tools are available:
  • density: Creates a density plot from a matrix created with the "comp" tool. Typically this is used to compare two K-mer hashes produced by different NGS reads.
  • profile: Creates a K-mer coverage plot for a single sequence. Takes in fasta coverage output coverage from the "sect" tool
  • spectra-cn: Creates a stacked histogram using a matrix created with the "comp" tool. Typically this is used to compare a jellyfish hash produced from a read set to a jellyfish hash produced from an assembly. The plot shows the amount of distinct K-mers absent, as well as the copy number variation present within the assembly.
  • spectra-hist: Creates a K-mer spectra plot for a set of K-mer histograms produced either by jellyfish-histo or kat-histo.
  • spectra-mx: Creates a K-mer spectra plot for a set of K-mer histograms that are derived from selected rows or columns in a matrix produced by the "comp".

In addition, KAT contains a python script for analysing the mathematical distributions present in the K-mer spectra in order to determine how much content is present in each peak.

This README only contains some brief details of how to install and use KAT. For more extensive documentation please visit: https://kat.readthedocs.org/en/latest/

https://academic.oup.com/bioinformatics/article/33/4/574/2664339 

Address of the bookmark: https://github.com/TGAC/KAT

A list of programs for genotype and SNP calling :

SOAP2 http://soap.genomics.org.cn/index.html

Single-sample High-quality variant database (for example, dbSNP) Package for NGS data analysis, which includes a single individual genotype caller (SOAPsnp)

realSFS http://128.32.118.212/thorfinn/realSFS/

Single-sample Aligned reads Software for SNP and genotype calling using single individuals and allele frequencies. Site frequency spectrum (SFS) estimation

Samtools http://samtools.sourceforge.net/

Multi-sample Aligned reads Package for manipulation of NGS alignments, which includes a computation of genotype likelihoods (samtools) and SNP and genotype calling (bcftools)

GATK http://www.broadinstitute.org/gsa/wiki/index.php/The_Genome_Analysis_Toolkit Multi-sample Aligned reads Package for aligned NGS data analysis, which includes a SNP and genotype caller (Unifed Genotyper), SNP filtering (Variant Filtration) and SNP quality recalibration (Variant Recalibrator)

Beagle http://faculty.washington.edu/browning/beagle/beagle.html

Multi-sample LD Candidate SNPs, genotype likelihoods Software for imputation, phasing and association that includes a mode for genotype calling

IMPUTE2 http://mathgen.stats.ox.ac.uk/impute/impute_v2.html

Multi-sample LD Candidate SNPs, genotype likelihoods Software for imputation and phasing, including a mode for genotype calling. Requires fine-scale linkage map

QCall ftp://ftp.sanger.ac.uk/pub/rd/QCALL

Multi-sample LD ‘Feasible’ genealogies at a dense set of loci, genotype likelihoods Software for SNP and genotype calling, including a method for generating candidate SNPs without LD information (NLDA) and a method for incorporating LD information (LDA). The ‘feasible’ genealogies can be generated using Margarita (http://www.sanger.ac.uk/resources/software/margarita)

MaCH http://genome.sph.umich.edu/wiki/Thunder

Multi-sample LD Genotype likelihoods Software for SNP and genotype calling, including a method (GPT_Freq) for generating candidate SNPs without LD information and a method (thunder_glf_freq) for incorporating LD information

Address of the bookmark: https://github.com/dhlbh/BASE

usage:   canu [-correct | -trim | -assemble | -trim-assemble] \
              [-s ] \
               -p  \
               -d  \
               genomeSize=[g|m|k] \
               -maxThreads=2 \
               useGrid=false \
              [other-options] \
               read_file.fastq.gz

A default Canu run produces usually high quality assembly, example of a command that was used for testing can be found below. However, there are still a lot of parameters that are possible to tweak. For example if we desire to assemble haplotypes separately of if we want to smash them together, we can alternate the error correction process.

canu -p test_asmbl \
     -d asm_test3 \
     genomeSize=2m \
     -maxThreads=2 useGrid=false \
     -pacbio-raw \ ~/pacbio/dna/sample_reads.fastq.gz

There is a brilliant section in documentation about parameter tweaking.

The output directory contains will contain many files. The most interesting ones are:

• *.correctedReads.fasta.gz : file containing the input sequences after correction, trim and split based on consensus evidence.
• *.trimmedReads.fastq : file containing the sequences after correction and final trimming
• *.layout : file containing informations about read inclusion in the final assembly
• *.gfa : file containing the assembly graph by Canu
• *.contigs.fasta : file containing everything that could be assembled and is part of the primary assembly

The basic stats of assembly can be read from reports generated by the assembler, or calculated using standard UNIX command line tools.

More at https://canu.readthedocs.io/en/latest/faq.html

Applicants should hold a PhD or a first class MSc/MTech degree in Bioinformatics of Biotechnology/Life Sciences; experience in using bioinformatics tools, working in Linux and knowledge of computer network administration.

Submit CV and letter of interest by email to: Dr. Dinesh Gupta atdinesh@icgeb.res.in

RaGOO is a tool for coalescing genome assembly contigs into pseudochromosomes via minimap2 alignments to a closely related reference genome. The focus of this tool is on practicality and therefore has the following features:

1. Good performance. On a MacBook Pro using Arabidopsis data, pseudochromosome construction takes less than a minute and the whole pipeline with SV calling takes ~2 minutes.
2. Intact ordering and orienting of contigs.
3. Misassembly correction
4. GFF lift-over
5. Structural variant calling with and integrated version of Assemblytics
6. Confidence scores associated with the grouping, localization, and orientation for each contig.

Address of the bookmark: https://github.com/malonge/RaGOO

Email: admin@niab.org.in Telephones: +91 40 2304 9403 Telefax: +91 40 2304 2740
Advertisement No: 5/2014

About NIAB National Institute of Animal Biotechnology (NIAB), Hyderabad, an autonomous institute under the aegis of Department of Biotechnology, Government of India, is aimed to harness novel and emerging biotechnologies and create knowledge in the cutting edge areas for improving animal health and productivity.

Applications are invited for the following temporary research positions to work in ongoing DBTBBSRC sponsored research project entitled “Transcriptome Analysis in Indian buffalo and the Genetics of Innate Immunity” at the National Institute of Animal Biotechnology, Hyderabad.

(A) Project Scientist – Level B (One Position)

Emoluments: Rs. 15600 + GP Rs. 5400 + 30 % HRA p.m. (Total emoluments will be Rs. 49,770/-p.m. for the duration of the project)

Essential Qualification: Candidates having M.V.Sc. in Veterinary Microbiology / Veterinary Pathology / Veterinary Public Health / Ph.D. degree in Life Sciences, Biotechnology, Molecular Biology or any other related field from the recognized university are eligible to apply.

The candidate should have a good academic record and research experience as evidenced from published in standard referred journals / patents.

Desirable: Candidates having research experience in the area of tissue culture, genomics, Transcriptomics and Advanced Molecular Biology will be given preference.

Age Limit: Not exceeding 30 years as on last date of the submission of the application.

(B) Research Associate in Bioinformatics (One position)

Fellowship: Rs. 22,000 + 30 % HRA

Essential Qualification: Candidates having Ph.D. degree or M.Tech. with three years of
experience in Bioinformatics, Computational Biology, Biotechnology, Life Sciences or any other related field are eligible to apply.

Desirable: Candidate having research experience in the area of next generation sequencing (NGS) data analysis, Genome wide association studies, Genomic selection, advance genomic data analysis etc., will be given preference. The candidate should have a good academic record and research experience as evidenced from published papers in standard journals / patents.

Age Limit: Not exceeding 30 years as on last date of the submission of the application.

Project Duration: The duration of the project is Three years and the positions are co- terminus with the duration of the project. (Initial appointment will be for one year and further extension will be granted based on annual review).

Mode of submission of application: Only online applications are to be submitted through
www.niab.org.in on or before 08 December, 2014. Link for online submission of applications will be available from 10 November 2014.

Advertisement: www.niab.org.in/Notifications/Advt_5_2014/Advt_5_2014.pdf