Take a look at the PRICE software from the DeRisi lab. Its meant to do something very similar. http://derisilab.ucsf.edu/index.php?page=software

You could also look at SSPACE (http://www.baseclear.com/landingpages/basetools-a-wide-range-of-bioinformatics-solutions/sspacev12/), ATLAS tools (http://www.hgsc.bcm.tmc.edu/content/bcm-hgsc-software), and SCARPA (http://compbio.cs.toronto.edu/hapsembler/scarpa.html).

See the PAGIT protocol: http://www.sanger.ac.uk/resources/software/pagit/

In particular, take a look at the IMAGE tool: http://genomebiology.com/2010/11/4/R41

Also SOAPdenovo has ha function for scaffolding. Not sure about ABYSS

Here there is a useful explanation of several tools.

https://bioinformaticsonline.com/search?q=scaffolding&entity_type=object&entity_subtype=bookmarks&offset=0&search_type=entities

I could be wrong, but the above answers to your hypothetical scenario appear to miss the point that you aren't interested in assembling the full genome, just the 100 kb part you're interested in. I suggest the following algorithm:

1. Start with the initial assembly C0 of the contigs you have identified as overlapping your region of interest, and the set S of reads those contigs contain. Let C = C0.

2. Repeat:
a. Identify paired-end reads (not in C) for which one or both ends align within, or extending, contigs in C.
b. Identify unpaired reads that align extending these new paired-end reads.
c. Construct a new assembly C' from C and the new reads identified in (a) and (b).
d. Trim C' so it does not extend more than 100 kb to either end of C0. Set C = C'.
e. Let S' denote the reads that contribute to C'. If S' does not contain any reads not present in S, stop. Otherwise, Set S = S'.

3. If you don't have a complete assembly of the region of interest, generate an STS for each end of each contig, probe a library for clones including these STSes, subclone these clones into a paired-end sequencing vector, and generate paired-end reads for this library; then try steps (1) and (2) again, adding these new sequencing reads to what you had before.

4. If your average sequencing depth for the region of interest exceeds 25 or so without filling all gaps, it is likely that the remaining gaps represent sequences that are not getting cloned in your sequencing vectors. Try different sequencing vectors.

Computational methods used by the Shasta assembler include:

• Using a run-length representation of the read sequence. This makes the assembly process more resilient to errors in homopolymer repeat counts, which are the most common type of errors in Oxford Nanopore reads.
• Using in some phases of the computation a representation of the read sequence based on markers, a fixed subset of short k-mers (k ≈ 10).

More at https://chanzuckerberg.github.io/shasta/index.html

Address of the bookmark: https://github.com/chanzuckerberg/shasta

During the first phase of ENCODE, published in 2007, microarray-based technologies were used to detect regions associated with transcription factors, certain histone modifications and open chromatin within a pre-specified 1% of the human genome.

ENCODE’s second phase saw a switch to sequencing-based technologies, the addition of new assay types and the analysis of functional elements genome-wide, described in a collection of research articles in 2012.

The Encyclopedia paper of ENCODE 3, published in Nature, gives an overview of the various assays that were performed in human and mouse cell lines and tissues and describes a Registry of human and mouse candidate cis-regulatory elements (cCREs).

More at https://www.nature.com/immersive/d42859-020-00027-2/index.html

You can try this here, or try it later on your own data.

Get data

We will use the same Illumina data as we used above:

• illumina_R1.fastq.gz: the Illumina forward reads
• illumina_R2.fastq.gz: the Illumina reverse reads

Assemble

Run Spades:

spades.py -1 illumina_R1.fastq.gz -2 illumina_R2.fastq.gz --careful --cov-cutoff auto -o spades_assembly_all_illumina

• -1 is input file of forward reads
• -2 is input file of reverse reads
• --careful minimizes mismatches and short indels
• --cov-cutoff auto computes the coverage threshold (rather than the default setting, “off”)
• -o is the output directory

Results

Move into the output directory and look at the contigs:

infoseq contigs.fasta

a) M.Sc/or equivalent in biological sciences/related areas [Position Code: PA_JRF_PF_a]
b) B.E/B.Tech/ M.Sc in biotechnology/bioinformatics/computer science/Chemistry/Physics or MCA [Position Code: PA_JRF_PF_b]
c) M.Sc/or equivalent in wildlife sciences/ecology/environmental sciences or MBBS/BVSc/MVSc. [Position Code: PA_JRF_PF_c]

(Candidates with result awaited are NOT eligible to apply)

Upper Age limit 28years

Rs.12000 / Rs.16000 (as sanctioned by the funding agency)

2. Post Doctoral Fellow/Research Associate in multiple research areas [PDF_RA]

Ph.D. (submitted/awarded) in any branch of biological Sciences. Candidates with Ph.D. in other sciences are also encouraged to apply.

Experience in molecular biology, biochemistry, structural biology, cell biology, infectious disease, conservation genetics, veterinary science, reproductive biology, and molecular diagnostics is desired but not mandatory.

[Position Code: PDF_RA]

UpperAge limit 35years

Rs. 22000- 26000 (as sanctioned by the funding agency)

3. Post Doctoral Scientist Fellow [PDSF]

Ph.D in any of the following areas: bioinformatics, next generation sequencing, high throughput data analysis, proteomics, bio-statistics, computer science, information technology, computer hardware and networking/clustering, parallel processing.
[Position Code: PDSF]

Upper Age limit 40 years

Rs. 40000 consolidated (as sanctioned by the funding agency)

Download Application: Last date for apply online: 09th Oct 2014

Advertisement: www.ccmb.res.in//index.php?view=notifications&mid=0&id=71&nid=38

Apply online http://www.ccmb.res.in/positions/temp_notif/online_form.html

More at http://www.ccmb.res.in//index.php?view=notifications&mid=0&id=71&nid=38

ArrayGen specializes in Genomics data analysis and research, as we believe in the level of precision, predictability, benchmark-ability, and data analysis capability of genomics data over other forms of biological data. ArrayGen constantly strives to develop new solutions, and plug the existing gaps in the technological advancement of the field.

More http://www.arraygen.com/

Research topic: Protein function annotation, multiple probabilistic models, domain architecture, machine learning, combinatorial optimization, computer grid.

This project is run on the Laboratoire de Biologie Computationnelle et Quantitative UMR7238 CNRS-UPMC – Analytical Genomics team, headed by A.Carbone. It is co-advised with Pierre-Henri Wuillemin, Laboratoire d’Informatique de Paris 6 – Equipe DECISION.

The postdoc will be payed under a contract of Ingénieur de Recherche lasting 3.5 years and it is available from September 1st, 2014.

Group Web Page: http://www.lcqb.upmc.fr/AnalGenom/home.html

Ref. E-Mail: Alessandra Carbone alessandra.carbone@lip6.fr

About JNIAS
Jawaharlal Nehru Institute of Advanced Studies (JNIAS), Hyderabad has been established by Dr. D. Swaminadhan Research Foundation (DSRF), Hyderabad as a Research and Educational Institution with a view to contribute in developing advanced technologies and build „core competence‟ in specific areas. The activities of JNIAS involves: Education, Research Training and Innovations in the fields of Sciences, Technologies, Humanities and Social Sciences. It aims to blossom into an Advanced Institute of education and research with a reservoir of expertise and experience in the relevant fields and the necessary capability to harness multi-disciplinary research and studies. JNIAS has been recognized as an Advanced Research Institute by Jawaharlal Nehru Technological University Hyderabad (JNTUH), Hyderabad and Jawaharlal Nehru Technological University Anantapur (JNTUA), for offering Ph.D., P.G M.Phil, P.G Diploma and Training Programmes in Sciences and Engineering & Technology.

Jawaharlal Nehru Architecture and Fine Arts University (JNAFAU) Hyderabad also recognized JNIAS for offering UG, PG degree in Architecture.

Projects & Facilities

JNIAS offers wide range of projects:

Biotechnology area:

Molecular Biology
Microbiology
Nanotechnology
Bioinformatics (Schrodinger Software)
In Silico studies & Drug Designing
Sequence analysis
Protein structure function studies

Registration
Tuition Fees: Interested students need to pay the following tuition fees:
1. Six Month’s Project: Rs. 20,000/-
2. Four Month’s Project: Rs. 15,000/-
3. Three Month’s Project: Rs. 10,000/-
4. One Month - Hands on Training : Rs. 8,000/-

For enquires call:
91-7893203414 (Biotechnology), 91-9949582263 (Environmental Sciences) 91-8977369305 (Computer Science)

Interested student may download the application from the website (www.jnias.in) and send the hard copy of the completed application forms and Curriculum Vitae along with the Demand Draft drawn on any nationalized Banks in favor of “The Registrar, JNIAS, Secunderabad”. Application forms can be sent through email to academicprojects@jnias.in

Address
Jawaharlal Nehru Institute of Advanced Studies (JNIAS)
6th Floor, Buddha Bhavan, M.G Road,
Secunderabad - 500 003
Andhra Pradesh, India
Tele/Fax: 040- 27541551; 27541553
Mobile: 08885541554
Web site: www.jnias.in

Brochure : https://drive.google.com/file/d/0B3zPwhgA-u-nU0dyMFd2OWcxNUpSTWNYc0xDSGs5UDI4UDNB/view?usp=sharing