BOL: Related items

Julia Programming Language, a Python and R rival

Radha Agarkar — Sat, 25 Aug 2018 04:46:39 -0500

Big data has grown to become one of the most lucrative fields. In fact, data scientists are some of the most sought people. They are usually hired to analyze, control and parse large chunks of data. Implementing these actions using traditional techniques is not a walk in the park. This is why most data scientists prefer using programming languages such as R and Python. However, there is one more programming language that can do the job. That is Julia programming language.

What Is Julia Language?

Julia is a programming language that came into the limelight in 2012. It is a general-purpose programming language that was designed for solving scientific computations. Julia was meant to be an alternative to Python, R and other programming languages that were mainly used for manipulating data. This is because it has numerous features that can minimize the complexities of numerical computations.

Julia optimizes on the best features of Python and R while at the same time overlooks their weaknesses. This explains why it is viewed as an alternative to these programming languages. For instance, it utilizes the readability and simplicity of Python then performs faster.

Julia is the most preferred programming language for data scientists and mathematicians. This is because its core features are similar to the ones that are used on most data software. Also, the language is ideal for these two subjects because its syntax is similar to the standard mathematical formulas.

Key Features Of Julia Language
Uses JIT Compilation
Parallelism
Dynamic Typing
Simple Syntax
Allows Metaprogramming
Accessible to Libraries
-1-Array Indexing

Julia Vs Python And R Programming Languages
1. Speed
Julia is faster than both Python and R. This is a very critical aspect that is given special attention in the big data programming. The high speed of Julia is because of JIT compilers. You will need to install external libraries on Python to achieve similar speed.

2. Syntax
Julia has a math-friendly syntax. The syntax of this programming language is similar to the mathematical formulas hence can be used to perform mathematical and scientific computations. This syntax makes it easier to learn than Python.

3. Parallelism
Although both Python and R use parallelism, Julia uses a top-level parallelism. Julia allows the processor to perform to the optimum level than what Python and R can achieve.

4. Versatility
Julia programming language is more versatile than Python and R. It allows a programmer to move from different codes and functions with ease.

The only area that Python and R are superior to Julia is in terms of community. Given that Julia is a new programming language, it has a small community as compared to others which have been around for years.

In overall Julia programming language is a better alternative that you can use to handle Big data projects. Despite having a small community, it is one of those programming languages that you can easily learn.

JRF/SRF at Jawaharlal Nehru Institute ofAdvanced Studies (JNIAS), Hyderabad

Fri, 31 Oct 2014 08:48:23 -0500

Applications for Academic Projects in Biotechnology, Bioinformatics, Environmental Sciences and Computer Science & Engineering

About JNIAS
Jawaharlal Nehru Institute of Advanced Studies (JNIAS), Hyderabad has been established by Dr. D. Swaminadhan Research Foundation (DSRF), Hyderabad as a Research and Educational Institution with a view to contribute in developing advanced technologies and build „core competence‟ in specific areas. The activities of JNIAS involves: Education, Research Training and Innovations in the fields of Sciences, Technologies, Humanities and Social Sciences. It aims to blossom into an Advanced Institute of education and research with a reservoir of expertise and experience in the relevant fields and the necessary capability to harness multi-disciplinary research and studies. JNIAS has been recognized as an Advanced Research Institute by Jawaharlal Nehru Technological University Hyderabad (JNTUH), Hyderabad and Jawaharlal Nehru Technological University Anantapur (JNTUA), for offering Ph.D., P.G M.Phil, P.G Diploma and Training Programmes in Sciences and Engineering & Technology.

Jawaharlal Nehru Architecture and Fine Arts University (JNAFAU) Hyderabad also recognized JNIAS for offering UG, PG degree in Architecture.

Projects & Facilities

JNIAS offers wide range of projects:

Biotechnology area:

Molecular Biology
Microbiology
Nanotechnology
Bioinformatics (Schrodinger Software)
In Silico studies & Drug Designing
Sequence analysis
Protein structure function studies

Registration
Tuition Fees: Interested students need to pay the following tuition fees:
1. Six Month’s Project: Rs. 20,000/-
2. Four Month’s Project: Rs. 15,000/-
3. Three Month’s Project: Rs. 10,000/-
4. One Month - Hands on Training : Rs. 8,000/-

For enquires call:
91-7893203414 (Biotechnology), 91-9949582263 (Environmental Sciences) 91-8977369305 (Computer Science)

Interested student may download the application from the website (www.jnias.in) and send the hard copy of the completed application forms and Curriculum Vitae along with the Demand Draft drawn on any nationalized Banks in favor of “The Registrar, JNIAS, Secunderabad”. Application forms can be sent through email to academicprojects@jnias.in

Address
Jawaharlal Nehru Institute of Advanced Studies (JNIAS)
6th Floor, Buddha Bhavan, M.G Road,
Secunderabad - 500 003
Andhra Pradesh, India
Tele/Fax: 040- 27541551; 27541553
Mobile: 08885541554
Web site: www.jnias.in

Brochure : https://drive.google.com/file/d/0B3zPwhgA-u-nU0dyMFd2OWcxNUpSTWNYc0xDSGs5UDI4UDNB/view?usp=sharing

Environment for Tree Exploration (ETE) is a Python programming toolkit that assists in the recontruction, manipulation, analysis and visualization of phylogenetic trees

Rahul Nayak — Wed, 27 Nov 2019 05:32:33 -0600

The Environment for Tree Exploration (ETE) is a Python programming toolkit that assists in the recontruction, manipulation, analysis and visualization of phylogenetic trees (although clustering trees or any other tree-like data structure are also supported).

Other tools

https://github.com/shenwei356/taxonkit

ETE, version: 3.1.1
BioPython, version: 1.73
taxadb, version: 0.10.1
TaxonKit, version: 0.5.0

Address of the bookmark: https://pypi.org/project/ete3/3.1.1/

Luigi: a Python package that helps you build complex pipelines of batch jobs.

Neel — Thu, 24 Jun 2021 05:43:31 -0500

Luigi is a Python (3.6, 3.7, 3.8, 3.9 tested) package that helps you build complex pipelines of batch jobs. It handles dependency resolution, workflow management, visualization, handling failures, command line integration, and much more.

Run pip install luigi to install the latest stable version from PyPI. Documentation for the latest release is hosted on readthedocs.

Run pip install luigi[toml] to install Luigi with TOML-based configs support.

Address of the bookmark: https://github.com/spotify/luigi

Creating conda environment for python2.7

Jit — Mon, 07 May 2018 08:56:52 -0500

TIP: By default, environments are installed into the envs directory in your conda directory. Run conda create --help for information on specifying a different path.

Use the Terminal or an Anaconda Prompt for the following steps.

To create an environment:
```
conda create --name myenv
```
NOTE: Replace myenv with the environment name.
When conda asks you to proceed, type y:
```
proceed ([y]/n)?
```

This creates the myenv environment in /envs/. This environment uses the same version of Python that you are currently using, because you did not specify a version.

To create an environment with a specific version of Python:

conda create -n myenv python=3.4

To create an environment with a specific package:

conda create -n myenv scipy

OR:

conda create -n myenv python
conda install -n myenv scipy

To create an environment with a specific version of a package:

conda create -n myenv scipy=0.15.0

OR:

conda create -n myenv python
conda install -n myenv scipy=0.15.0

To create an environment with a specific version of Python and multiple packages:

conda create -n myenv python=3.4 scipy=0.15.0 astroid babel

TIP: Install all the programs that you want in this environment at the same time. Installing 1 program at a time can lead to dependency conflicts.

To automatically install pip or another program every time a new environment is created, add the default programs to the create_default_packages section of your .condarc configuration file. The default packages are installed every time you create a new environment. If you do not want the default packages installed in a particular environment, use the --no-default-packages flag:

conda create --no-default-packages -n myenv python

TIP: You can add much more to the conda create command. For details, run conda create --help.

➜ redundans git:(master) ✗ conda create --name py27 python=2.7
Solving environment: done

==> WARNING: A newer version of conda exists. <==
current version: 4.5.0
latest version: 4.5.2

Please update conda by running

$ conda update -n base conda

## Package Plan ##

environment location: /home/urbe/anaconda3/envs/py27

added / updated specs:
- python=2.7

The following packages will be downloaded:

package | build
---------------------------|-----------------
wheel-0.31.0 | py27_0 61 KB
python-2.7.15 | h1571d57_0 12.1 MB
certifi-2018.4.16 | py27_0 142 KB
sqlite-3.23.1 | he433501_0 1.5 MB
setuptools-39.1.0 | py27_0 582 KB
openssl-1.0.2o | h20670df_0 3.4 MB
pip-10.0.1 | py27_0 1.7 MB
ca-certificates-2018.03.07 | 0 124 KB
------------------------------------------------------------
Total: 19.6 MB

The following NEW packages will be INSTALLED:

ca-certificates: 2018.03.07-0
certifi: 2018.4.16-py27_0
libedit: 3.1-heed3624_0
libffi: 3.2.1-hd88cf55_4
libgcc-ng: 7.2.0-hdf63c60_3
libstdcxx-ng: 7.2.0-hdf63c60_3
ncurses: 6.0-h9df7e31_2
openssl: 1.0.2o-h20670df_0
pip: 10.0.1-py27_0
python: 2.7.15-h1571d57_0
readline: 7.0-ha6073c6_4
setuptools: 39.1.0-py27_0
sqlite: 3.23.1-he433501_0
tk: 8.6.7-hc745277_3
wheel: 0.31.0-py27_0
zlib: 1.2.11-ha838bed_2

Proceed ([y]/n)? y

Downloading and Extracting Packages
wheel 0.31.0: #################################################################################################################################################################################################### | 100%
python 2.7.15: ################################################################################################################################################################################################### | 100%
certifi 2018.4.16: ############################################################################################################################################################################################### | 100%
sqlite 3.23.1: ################################################################################################################################################################################################### | 100%
setuptools 39.1.0: ############################################################################################################################################################################################### | 100%
openssl 1.0.2o: ################################################################################################################################################################################################## | 100%
pip 10.0.1: ###################################################################################################################################################################################################### | 100%
ca-certificates 2018.03.07: ###################################################################################################################################################################################### | 100%
Preparing transaction: done
Verifying transaction: done
Executing transaction: done
#
# To activate this environment, use:
# > source activate py27
#
# To deactivate an active environment, use:
# > source deactivate
#

➜ redundans git:(master) ✗ source activate py27

Celebrating Crystallography - An animated adventure

Fri, 31 Oct 2014 15:59:00 -0500

NEW: Now with French or Spanish subtitles (click on the 'Captions' icon to select). Plus... Watch the French language version here: https://www.youtube.com/watch?v=PvLu7BOsJhM X-ray crystallography is arguably one of the greatest innovations of the twentieth century, but not that many people know what it is or how it came about. Join us on an animated journey through the 100 year history of crystallography -- from the pioneering work of William and Lawrence Bragg in 1913 to the surface of Mars! Narrated by structural biologist Stephen Curry and produced by animation company 12foot6, the film explores the extraordinary history of crystallography. To date 28 Nobel Prizes have been awarded to projects related to the field and X-ray crystallography remains the foremost technique in determining the structures of a huge range of complex molecules. This film was produced in celebration of the Bragg Centenary and was funded by STFC. Watch more science videos on the amazing Ri Channel: http://richannel.org Watch more animations from 12foot6: http://12foot6.com/ The Ri is on Twitter: http://twitter.com/ri_science and Facebook: http://www.facebook.com/royalinstitution Subscribe for the latest science videos: http://richannel.org/newsletter

Tools for Geospatial data analysis !

BioStar — Wed, 22 Mar 2023 02:10:28 -0500

Geospatial data is becoming increasingly important in many fields, including urban planning, environmental science, public health, and more. These tools can help you work with data from a variety of sources, including satellite imagery, GPS data, and other forms of spatial data. They can help you visualize data, perform complex analysis, and even create maps and other visualizations.

The list includes some of the most popular and widely used geospatial tools available in Python. These tools can help you work with data from a variety of sources and in a variety of formats. Some of the tools are focused on visualization, such as Cartopy, Folium, and Contextily, which allow you to create interactive maps and other visualizations. Other tools are more focused on data manipulation and analysis, such as Fiona, GeoPandas, and Rasterio, which allow you to manipulate and analyze spatial data in a variety of ways.

The list also includes some tools for working with specific types of geospatial data. For example, the H3 library is designed specifically for working with hexagonal grids, while PySAL is focused on spatial econometrics and spatial analysis. Whether you are a data scientist, GIS specialist, or geospatial enthusiast, these tools are sure to enhance your work and help you achieve your goals.

In summary, this list is an excellent resource for anyone working with geospatial data in Python. It contains a wide range of tools for working with different types of data, and can help you visualize data, perform complex analysis, and create maps and other visualizations. If you're looking to enhance your skills in geospatial analysis, this list is definitely worth checking out.

These tools are:

ArcGIS - https://lnkd.in/dgC6sKJH
Cartopy - https://lnkd.in/dc8ijXRg
Contextily - https://lnkd.in/dTdQsmKX
Descartes - https://lnkd.in/dCJykxwW
Fiona - https://lnkd.in/d8sJ3Q5a
Folium - https://lnkd.in/dfSsE-MB
GDAL - https://lnkd.in/dYBJBaAY
Geohash - https://lnkd.in/d_NxJ4_M
GeoJSON - https://lnkd.in/daGs2WYq
GeoPandas - https://lnkd.in/dBTFKKV3
Geopy - https://lnkd.in/dfAzR8Xa
Gevent - http://www.gevent.org
H3 - https://h3geo.org/docs/
OSMnx - https://lnkd.in/dm3pHgUS
PyQGIS - https://lnkd.in/dShWyWVr
PySAL - https://pysal.org
Pydeck - https://lnkd.in/dGBFu-iw
Pyproj - https://lnkd.in/dNG9fdkm
RTree - https://lnkd.in/dURMiYpU
Rasterio - https://lnkd.in/dEMC6ve6
Scikit-mobility - https://lnkd.in/dpHhaX2J
Shapely - https://lnkd.in/d568datK

These tools offer a wide range of capabilities for working with geospatial data, from visualizing and manipulating data to performing complex analysis and modeling. Whether you are a data scientist, GIS specialist, or geospatial enthusiast, these tools are sure to enhance your work and help you achieve your goals.

CLAW: Chloroplast Long-read Assembly Workflow

LEGE — Wed, 21 Feb 2024 12:37:46 -0600

CLAW (Chloroplast Long-read Assembly Workflow) is an mostly-automated Snakemake-based workflow for the assembly of chloroplast genomes. CLAW uses chloroplast long-reads, which are baited out of larger read libraries (e.g., an Oxford Nanopore Technologies MinION read library derived from photosynthetic tissue), for assembly with Flye and/or Unicycler. CLAW was designed with the novice bioinformatician in mind - it is easy to install and easy to use, requiring only minimal user input.

Address of the bookmark: https://github.com/aaronphillips7493/CLAW

Centre for Systems Biology & Bioinformatics, Panjab University vacancy of Research Fellow

Wed, 12 Nov 2014 06:18:54 -0600

Applications are invited along with complete bio-data and attested copies of certificates of qualifications, experience etc. for the one post of
Research Fellow and one post of Program Assistant under PURSE Grant of the University in Centre for Systems Biology & Bioinformatics, UIEAST, Panjab University, Chandigarh which is tenable till the period of the project

Essential Qualification
For Research Fellow:-
M.Sc. in Systems Biology and Bioinformatics / Life
Sciences with minimum 55% marks.
Preference will be given to NET/GATE/ICMR qualified candidates without fellowship however, candidates who have cleared the Panjab University Ph.D. entrance test in Systems Biology & Bioinformatics will also be eligible.

Applications should be reach on or before 19-11-2014 in the office of the undersigned. Interview will be held on 21-11-2014 in the office of the Coordinator, Centre for Systems Biology & Bioinformatics, South Campus, Block-3, Sector-25, Panjab University, Chandigarh. No TA/DA will be paid.

more at http://jobs.puchd.ac.in/includes/jobs/2014/20141110143634-Advertisement.pdf

RNA-seq workflow: gene-level exploratory analysis and differential expression

Jit — Sat, 09 Oct 2021 07:59:23 -0500

Here we walk through an end-to-end gene-level RNA-seq differential expression workflow using Bioconductor packages. We will start from the FASTQ files, show how these were quantified to the reference transcripts, and prepare gene-level count datasets for downstream analysis. We will perform exploratory data analysis (EDA) for quality assessment and to explore the relationship between samples, perform differential gene expression analysis, and visually explore the results.

Address of the bookmark: http://master.bioconductor.org/packages/release/workflows/vignettes/rnaseqGene/inst/doc/rnaseqGene.html