BOL: Related items

HapSolo: An optimization approach for removing secondary haplotigs during diploid genome assembly and scaffolding

Jit — Sat, 08 May 2021 21:25:00 -0500

HapSolo, that identifies secondary contigs and defines a primary assembly based on multiple pairwise contig alignment metrics. HapSolo evaluates candidate primary assemblies using BUSCO scores and then distinguishes among candidate assemblies using a cost function. The cost function can be defined by the user but by default considers the number of missing, duplicated and single BUSCO genes within the assembly. HapSolo performs hill climbing to minimize cost over thousands of candidate assemblies.

Address of the bookmark: https://github.com/esolares/HapSolo

RA Bioinformatics at NATIONAL INSTITUTE OF CANCER PREVENTION & RESEARCH (ICMR)

Thu, 17 Nov 2016 04:11:09 -0600

NATIONAL INSTITUTE OF CANCER PREVENTION & RESEARCH (ICMR)

Noida 201301 (U.P)

Applications are invited upto 21.11.2016 from interested candidates as per details available on NICPR website (www.nicpr.res.in)/ ICMR website (www.icmr.nic.in) to fill up following temporary position in the time bound DHR Project entitled “Next generation EGFR inhibitor identification using ligand based QSAR technique” under Dr. Subhash M. Agarwal, Scientist-D, Division of Bioinformatics.

Research Assistant (One)

Rs.27000/- p.m. (Fixed/temporary)

Essential: M.Sc. in Bioinformatics or related field.

Desirable: Experience in QSAR and structure based drug designing.

More Info : www.icmr.nic.in/icmrnews/NICPR_Advertisement%20for%20RA.pdf

Short-read assembly using Spades !

Abhimanyu Singh — Mon, 31 Jan 2022 07:18:16 -0600

If we only had Illumina reads, we could also assemble these using the tool Spades.

You can try this here, or try it later on your own data.

Get data

We will use the same Illumina data as we used above:

illumina_R1.fastq.gz: the Illumina forward reads
illumina_R2.fastq.gz: the Illumina reverse reads

Assemble

Run Spades:

spades.py -1 illumina_R1.fastq.gz -2 illumina_R2.fastq.gz --careful --cov-cutoff auto -o spades_assembly_all_illumina

-1 is input file of forward reads
-2 is input file of reverse reads
--careful minimizes mismatches and short indels
--cov-cutoff auto computes the coverage threshold (rather than the default setting, “off”)
-o is the output directory

Results

Move into the output directory and look at the contigs:

infoseq contigs.fasta

auN: a new metric to measure assembly contiguity

Jit — Tue, 02 Aug 2022 01:18:47 -0500

Given a de novo assembly, we often measure the “average” contig length by N50. N50 is neither the real average nor median. It is the length of the contig such that this and longer contigs cover at least 50% of the assembly. A longer N50 indicates better contiguity. We can similarly define Nx such that contigs no shorter than Nx covers x% of the assembly. The Nx curve plots Nx as a function of x, where x is ranged from 0 to 100.

Address of the bookmark: https://lh3.github.io/2020/04/08/a-new-metric-on-assembly-contiguity

EXCAVATOR2tool

Bulbul — Wed, 30 Nov 2016 04:09:19 -0600

EXCAVATOR2 is a collection of bash, R and Fortran scripts and codes that analyses Whole Exome Sequencing (WES) data to identify CNVs. EXCAVATOR2 enhances the identification of all genomic CNVs, both overlapping and non-overlapping targeted exons by integrating the analysis of In-targets and Off- targets reads. Specifically, it improves the precision of calling CNVs overlapping targeted exons from WES data and enlarges the spectrum of detectable CNVs to off-target events.
EXCAVATOR2 can be effectively employed for the identification of CNVs in small as well as large-scale re-sequencing population and cancer studies. Lastly, it’s of particular interest that all WES experiments can be re-analysed using our method with the beneficial effect to identify novelCNVs in extra-exonic regions by having the full-genome CN profile.

Address of the bookmark: https://sourceforge.net/projects/excavator2tool/

Mitochondrial genome assembly tools !

Abhi — Wed, 06 Sep 2023 00:37:18 -0500

Mitochondrial genome assembly tools are specialized software and algorithms designed to accurately reconstruct the mitochondrial genome (mitogenome) from sequencing data, typically obtained through techniques like next-generation sequencing (NGS). The mitochondrial genome is relatively small compared to the nuclear genome, making it an ideal target for assembly. Here are some commonly used mitochondrial genome assembly tools:

MitoFinder: Mitofinder is a pipeline to assemble mitochondrial genomes and annotate mitochondrial genes from trimmed read sequencing data.

MitoHiFi: a python pipeline for mitochondrial genome assembly from PacBio high fidelity reads

MITObim: MITObim is a tool specifically developed for the iterative assembly of mitochondrial genomes. It starts with a reference mitogenome and iteratively refines the assembly using the read data.

MITOS: MITOS is a web-based platform that provides a pipeline for annotating mitochondrial genomes. It integrates multiple software tools for assembly, annotation, and visualization of mitogenomes.

MIRA: MIRA (Mimicking Intelligent Read Assembly) is a versatile genome assembly tool that can be used for mitochondrial genome assembly. It supports various sequencing technologies and allows for reference-based or de novo assembly.

NOVOPlasty: NOVOPlasty is a user-friendly tool designed for de novo assembly of organelle genomes, including mitochondria. It utilizes a seed-and-extend algorithm and is suitable for both short-read and long-read data.

MITOS2: MITOS2 is an updated version of the MITOS pipeline, which automates the annotation of mitochondrial genomes. It provides improved accuracy and additional features for mitochondrial genome analysis.

GetOrganelle: While primarily designed for chloroplast genome assembly, GetOrganelle can also be used for mitochondrial genome assembly. It is particularly useful for dealing with high-throughput sequencing data.

SPAdes: SPAdes (St. Petersburg genome assembler) is a versatile genome assembly tool that can be employed for mitochondrial genome assembly, especially when dealing with complex datasets that may contain nuclear mitochondrial DNA sequences (numts).

IDBA-UD: IDBA-UD (Iterative De Bruijn Graph De Novo Assembler) is another de novo assembly tool that can be used for mitochondrial genome assembly, especially in cases with relatively low coverage.

Velvet: Velvet is a de novo assembly tool that can be applied to mitochondrial genome assembly, especially when working with short-read data.

When selecting a mitochondrial genome assembly tool, it's important to consider the specific characteristics of your sequencing data, such as read length and coverage, as well as the complexity of the mitochondrial genome. Additionally, some tools are better suited for specific organisms or research objectives, so choosing the right tool will depend on your particular project requirements.

DBT India

Jit — Sun, 04 Dec 2016 22:30:37 -0600

Latest announcement on DBT India.

Calls

Events

Projects

Jobs

Address of the bookmark: http://www.dbtindia.nic.in/out-reach/latest-announcements/

Structural variation: the hidden genomic treasure

Jit — Sat, 10 Dec 2016 16:19:09 -0600

Genome re-sequencing projects have revealed substantial amounts of genetic variation between individuals extending beyond single nucleotide polymorphisms (SNPs) and short indels. Structural Variations (SVs) and Copy Number Variations (CNVs) are a major source of genomic variation. However, compared to SNPs, accurate detection, genotyping and understanding of CNVs is lagging behind due to much greater analytical challenges related to SV/CNV detection and analysis. In our lab we analyse SVs/CNVs using high-throughput sequencing and different analytical approaches. The most‐studied structural variants are copy number variations (CNVs) which can be generated by several different mechanisms including non‐allelic homologous recombination, non‐homologous end‐joining and deoxyribonucleic acid (DNA) replication‐related fork stalling and template switching. CNVs are closely related to segmental duplications (SDs): SDs can stimulate the formation of CNVs and themselves started out as CNVs, but became fixed in a species. Structural variation can be neutral but has also influenced our phenotypic evolution, for example our susceptibility to disease and our ability to digest certain types of food. Our understanding of the extent of structural variation is increasing rapidly, but it will be much more difficult to understand its phenotypic consequences.

Structural variants (SVs) such as deletions, insertions, duplications, inversions and translocations litter genomes and are often associated with gene expression changes and severe phenotypes (ie. genetic diseases in humans). Recent studies on the functional aspects of different types of SVs have unveiled several cases of adaptive evolution. For example, inversions have been associated with ecological adaptations and may facilitate speciation. Due to their prevalent nature, SVs arguably have a large impact on genome evolution and should not be neglected when studying the genetics of adaptation and speciation. SVs were classically defined as chromosomal rearrangements larger than 1kb, but due to a higher resolution of new detection methods, smaller variants (between 50 and 1000 base pairs) can now be accurately assessed. Besides various methods of detection in next generation sequencing data (paired end mapping, split reads, and depth of coverage), array-based approaches have proven to be particularly useful for detecting copy number variations (CNVs). These technologies have enabled researchers to catalog a wide spectrum of SVs in many organisms and infer the effects of selection shaping their evolutionary trajectories.

Structure variation sequencing signature (Source: NatRev Genetics)

Related tools, databases and publications are listed below. If you know any interesing papers, please let us know in comment section:

Key concepts

Structural variation includes balanced variants such as inversions and translocations, and unbalanced ones such as duplications and deletions (copy number variations or CNVs).

Structural variants can arise by several mechanisms, including nonallelic homologous recombination (NAHR), nonhomologous end‐joining (NHEJ) and DNA replication‐based fork stalling and template switching (FoSTeS).

CNV is closely linked to segmental duplication, but is not exactly the same. Segmental duplications can stimulate CNV formation by NAHR, and themselves arise from CNVs that have become fixed.

Segmental duplications did not appear uniformly during the evolution of the Great Ape species, but rather during a burst of activity around the time of the divergence of gorilla from the human/chimpanzee ancestor.

Duplicated genes play a critical role in the evolution of a genome as they act as ‘spare parts’ than can evolve to perform new or more specialized functions.

Effects of structural variation on gene expression can be identified but only a few examples of the consequences for species biology have been documented.

Tools

CNVnatora tool for CNV discovery and genotyping from depth of read mapping.2011a,2011b

AGEa tools that implements an algorithm for optimal alignment of sequences with SVs.2011

BreakSeqa pipeline for annotation, classification and analysis of SVs at single nucleotide resolution.2010

PEMera computational and simulation framework for discovering SVs by paired-end read mapping.2009,2007

GASV https://code.google.com/archive/p/gasv/

PAIROSCOPE http://pairoscope.sourceforge.net/

SVDetect http://svdetect.sourceforge.net/Site/Home.html

BreakPtr, discovery of unbalanced structural variants (copy-number variants) with tiling microarrays Link

R Package https://www.bioconductor.org/help/course-materials/2010/EMBL2010/Practical-4-StructuralVariants.pdf

BreakSeq, structural variant genotyping using split reads Link

CopySeq, genotyping of unbalanced structural variants (copy-number variants) using read-depth Link

DELLY2, integrated structural variant discovery, genotyping and visualization in deep sequencing data Link

PEMer, structural variant discovery in 454 sequencing data by paired-end mapping Link

TIGER, transduction inference in germline genomes using short read data Link

MANTA https://github.com/Illumina/manta

SV-Bay https://github.com/InstitutCurie/SV-Bay

BreakDancer http://breakdancer.sourceforge.net/

Variation Hunter http://compbio.cs.sfu.ca/software-variation-hunter

Lumpy https://github.com/arq5x/lumpy-sv

ForestSV http://sebatlab.ucsd.edu/index.php/software-data

PBSuites for long reads https://sourceforge.net/projects/pb-jelly/

Visualization

The SV visualization tool: http://genomesavant.com/savant/

InGAP-SV (http://ingap.sourceforge.net/) that is nice tools for both detection and visualisation of severals kind of structural variations (Large insertions, translocation, deletion, inversions....)

Tools table: http://www.nature.com/nbt/journal/v29/n8/fig_tab/nbt.1904_T2.html

Variation Viewer https://www.ncbi.nlm.nih.gov/variation/view/

Papers

http://www.nature.com/nmeth/journal/v9/n2/full/nmeth.1858.html

http://journal.frontiersin.org/researchtopic/1412/structural-variations-in-genomes-ecological-and-evolutionary-implications

http://www.mi.fu-berlin.de/wiki/pub/ABI/GenomicsLecture10Materials/structural-variation.pdf

http://bmcgenomics.biomedcentral.com/articles/10.1186/s12864-015-1479-3

https://www.ncbi.nlm.nih.gov/dbvar/content/overview/

http://www.nature.com/subjects/structural-variation

https://eichlerlab.gs.washington.edu/news/NatMeth_Feb2012.pdf

https://www.ncbi.nlm.nih.gov/pubmed/19477992 ***

https://www.ncbi.nlm.nih.gov/pubmed/22452995

http://biorxiv.org/content/early/2016/09/06/073833

https://www.ncbi.nlm.nih.gov/pmc/articles/PMC4479793/

http://www.nature.com/articles/srep18501

http://www.genetics.org/content/202/1/351

http://www.cs.cmu.edu/~sssykim/teaching/s13/slides/Lecture_SVI.pdf

https://www.omicsonline.org/open-access/structural-variation-detection-from-next-generation-sequencing-2469-9853-S1-007.php?aid=69055

http://schatzlab.cshl.edu/presentations/2016/2016.01.12.PAG.Structural%20Variations.pdf

E-MEM: Efficient computation of Maximal Exact Matches

Jit — Thu, 15 Dec 2016 09:30:43 -0600

E-MEM is a C++/OpenMP program designed to efficiently compute MEMs between large genomes. See the README file for instructions on how to use E-MEM.

E-MEM source code

The source code can be downloaded here.

If you use E-MEM, please cite:

N. Khiste, L. Ilie, E-MEM: Efficient computation of Maximal Exact Matches for very large genomes, Bioinformatics 31(4) (2015) 509 -- 514.

For any questions, please contact Lucian Ilie: ilie@uwo.ca

Address of the bookmark: http://www.csd.uwo.ca/~ilie/E-MEM/

Venkatesh Lab

Tue, 20 Dec 2016 04:38:01 -0600

We are using a comparative genomics approach to better understand the structure, function and evolution of the human genome. Our group is one of the pioneers in the field of comparative genomics. We proposed the compact genome of the fugu (Takifugu rubripes) as a model vertebrate genome in 1993 (Nature 366: 265-268, 1993) and determined its whole genome sequence in 2002 (Science 297: 1301-1310, 2002).

More at
https://zfin.org/ZDB-LAB-110408-1
http://www.imcb.a-star.edu.sg/php/venkatesh.php