BOL: Related items

Setting python version as default on Linux

Rahul Nayak — Tue, 04 Sep 2018 10:15:47 -0500

If you have a later version than 2.6 you'll need to set 2.6 as the default Python. Later versions would be 2.7 and 3.1; see what you have by typing

python -V

at the terminal. For purposes of this example we'll assume you have 3.1 installed. You'll next need to execute the following commands:

sudo apt-get install python2.6 idle-python2.6
sudo update-alternatives --install /usr/bin/python python /usr/bin/python3.1 1
sudo update-alternatives --install /usr/bin/python python /usr/bin/python2.6 10
sudo update-alternatives --config python

This last command will allow you to choose which version of python to use by default. If you have done everything above correctly, python2.6 should already be set as the default. If it is not, choose it to be the default. From now on, running python should start version 2.6.

Undoing These Changes

In some cases (e.g., installing or updating certain packages), you'll get an error message if you've run the commands above. To update these packages, you'll have to temporarily undo these changes. Here's how to do that:

sudo update-alternatives --remove-all python
sudo ln -s python3.1 /usr/bin/python

Once you're done updating these packages, execute the commands at the top to set python2.6 as the default again.

Bioinformatics PhD at CUK Kerala

Sat, 10 May 2014 20:21:22 -0500

Applications are invited from highly motivated students (UGC-CSIR-JRF) with a background in Genomics/ Biotechnology/ Molecular Microbiology/ Biochemistry and Bioinformatics to pursue research leading to Ph.D. in the following areas;

1. Cancer Genomics

2. Microbial Genetics and Metagenomics

3. Human Infective Diseases

4. Computational Drug Design

Interested candidates may apply to Dr. Ranjith N. Kumavath, Assistant Professor & Head, Department of Genomic Science, School of Biological Sciences, Central University of Kerala, Padannakad (PO), Nileshwar, Kasaragod-671328,Kerala. Email: RNkumavath@gmail.com

Nucleus: Python and C++ code for reading and writing genomics data.

Jit — Sun, 02 Feb 2020 08:14:19 -0600

Nucleus is a library of Python and C++ code designed to make it easy to read, write and analyze data in common genomics file formats like SAM and VCF. In addition, Nucleus enables painless integration with the TensorFlow machine learning framework, as anywhere a genomics file is consumed or produced, a TensorFlow tfrecords file may be used instead.

Address of the bookmark: https://github.com/google/nucleus

A Brief Bioinformatics Tutorial

Jit — Wed, 21 May 2014 12:50:09 -0500

This is about how to use a computer to find what is known about a gene of interest and also how to get new insights about it.

The tutorial is divided in three main parts:

In the Sequence part, you will see how to look efficiently for a particular protein sequence, how to blast it against the database of your choice to find homologues, how to perform a multiple alignment of the homologues you've selected and how to edit this alignment.
The Structure part is about molecular visualization, homology modeling and structural domain prediction.
In the Function part, you will be introduced to you 3 useful servers to investigate the function of a protein. i.e. finding interactors, co-expressed genes, see a phylogenetic profile, easily access papers citing your gene etc ...

During all the three parts, we will use the S. cerevisiae VPS36 protein as an example.

Address of the bookmark: http://www.mrc-lmb.cam.ac.uk/rlw/text/bioinfo_tuto/introduction.html

Luigi: a Python package that helps you build complex pipelines of batch jobs.

Neel — Thu, 24 Jun 2021 05:43:31 -0500

Luigi is a Python (3.6, 3.7, 3.8, 3.9 tested) package that helps you build complex pipelines of batch jobs. It handles dependency resolution, workflow management, visualization, handling failures, command line integration, and much more.

Run pip install luigi to install the latest stable version from PyPI. Documentation for the latest release is hosted on readthedocs.

Run pip install luigi[toml] to install Luigi with TOML-based configs support.

Address of the bookmark: https://github.com/spotify/luigi

Bioinformatics JRF/SRF position at NII

Sun, 25 May 2014 16:54:04 -0500

NATIONAL INSTITUTE OF IMMUNOLOGY, NEW DELHI-110067

Applications are invited for the position of Senior Research Fellow for the following time-bound sponsored project as per the details given below:

1. BTIS project on, “Bioinformatics Center-National Infrastructural Facility in the Area of Immunology” funded by DBT

Senior Research Fellow (P) (One Position only)

Dr. Debasisa Mohanty
Staff Scientist-VI
deb@nii.res.in

Qualifications: M.Sc in Biological Sciences or Biotechnology with at least 04 years of Research experience in Bioinformatics or computational Biology after the master’s degree is essential.

Emoluments: The selected candidates will draw consolidated emoluments as per Institute Rules, depending upon qualifications & experience

Rs. 18,000/- per month consolidated plus 30% HRA if Leading to Ph.D/NET/GATE Qualified otherwise Rs. 14,000/- per month + 30% HRA.

Job description: The candidate should be well versed in programming in PERL/C++/HTML/CGI, web server and portal development, computational analysis of
protein structure & function, molecular dynamics simulations and use of high performance computing systems.

GENERAL TERMS AND CONDITIONS:-

1. The candidates selected for the above posts will be on contract for one year or duration of the project whichever is shorter, at a time.
2. No hostel/ housing facility will be provided.
3. Number of posts may vary and shall be need based. Advertisement is no commitment.
4. Applicants may clearly mention the category they belong to i.e. SC/ST/OBC/PH and attach documentary proof of the same.
5. No TA/DA will be paid for attending the interview, if called for.
6. Apart from sending application in the prescribed format given below, candidates should send complete Curriculum Vitae along with the names of three referees. Curriculum Vitae should contain details of the experimental expertise.

HOW TO APPLY Interested candidates may apply directly, STRICTLY IN THE PRESCRIBED FORMAT GIVEN BELOW, through e-mail, to the Investigator of the project, clearly indicating the name of the project along with their complete C.V., e-mail id, fax numbers, telephone numbers. Only Short listed candidates will be called for interview and they required to submit attested copies of all their certificates and a Demand Draft of Rs 100/- drawn on Canara Bank or Indian Bank payable at Delhi/New Delhi in favour of the Director, NII (SC / ST and PH candidates are exempted subject to submission of documentary proof), at the time of interview.

LAST DATE OF RECEIPT OF APPLICATIONS: 06th June, 2014

www1.nii.res.in/sites/default/files/projectappointment-Dr.Mohanty-6June2014.pdf

Creating conda environment for python2.7

Jit — Mon, 07 May 2018 08:56:52 -0500

TIP: By default, environments are installed into the envs directory in your conda directory. Run conda create --help for information on specifying a different path.

Use the Terminal or an Anaconda Prompt for the following steps.

To create an environment:
```
conda create --name myenv
```
NOTE: Replace myenv with the environment name.
When conda asks you to proceed, type y:
```
proceed ([y]/n)?
```

This creates the myenv environment in /envs/. This environment uses the same version of Python that you are currently using, because you did not specify a version.

To create an environment with a specific version of Python:

conda create -n myenv python=3.4

To create an environment with a specific package:

conda create -n myenv scipy

OR:

conda create -n myenv python
conda install -n myenv scipy

To create an environment with a specific version of a package:

conda create -n myenv scipy=0.15.0

OR:

conda create -n myenv python
conda install -n myenv scipy=0.15.0

To create an environment with a specific version of Python and multiple packages:

conda create -n myenv python=3.4 scipy=0.15.0 astroid babel

TIP: Install all the programs that you want in this environment at the same time. Installing 1 program at a time can lead to dependency conflicts.

To automatically install pip or another program every time a new environment is created, add the default programs to the create_default_packages section of your .condarc configuration file. The default packages are installed every time you create a new environment. If you do not want the default packages installed in a particular environment, use the --no-default-packages flag:

conda create --no-default-packages -n myenv python

TIP: You can add much more to the conda create command. For details, run conda create --help.

➜ redundans git:(master) ✗ conda create --name py27 python=2.7
Solving environment: done

==> WARNING: A newer version of conda exists. <==
current version: 4.5.0
latest version: 4.5.2

Please update conda by running

$ conda update -n base conda

## Package Plan ##

environment location: /home/urbe/anaconda3/envs/py27

added / updated specs:
- python=2.7

The following packages will be downloaded:

package | build
---------------------------|-----------------
wheel-0.31.0 | py27_0 61 KB
python-2.7.15 | h1571d57_0 12.1 MB
certifi-2018.4.16 | py27_0 142 KB
sqlite-3.23.1 | he433501_0 1.5 MB
setuptools-39.1.0 | py27_0 582 KB
openssl-1.0.2o | h20670df_0 3.4 MB
pip-10.0.1 | py27_0 1.7 MB
ca-certificates-2018.03.07 | 0 124 KB
------------------------------------------------------------
Total: 19.6 MB

The following NEW packages will be INSTALLED:

ca-certificates: 2018.03.07-0
certifi: 2018.4.16-py27_0
libedit: 3.1-heed3624_0
libffi: 3.2.1-hd88cf55_4
libgcc-ng: 7.2.0-hdf63c60_3
libstdcxx-ng: 7.2.0-hdf63c60_3
ncurses: 6.0-h9df7e31_2
openssl: 1.0.2o-h20670df_0
pip: 10.0.1-py27_0
python: 2.7.15-h1571d57_0
readline: 7.0-ha6073c6_4
setuptools: 39.1.0-py27_0
sqlite: 3.23.1-he433501_0
tk: 8.6.7-hc745277_3
wheel: 0.31.0-py27_0
zlib: 1.2.11-ha838bed_2

Proceed ([y]/n)? y

Downloading and Extracting Packages
wheel 0.31.0: #################################################################################################################################################################################################### | 100%
python 2.7.15: ################################################################################################################################################################################################### | 100%
certifi 2018.4.16: ############################################################################################################################################################################################### | 100%
sqlite 3.23.1: ################################################################################################################################################################################################### | 100%
setuptools 39.1.0: ############################################################################################################################################################################################### | 100%
openssl 1.0.2o: ################################################################################################################################################################################################## | 100%
pip 10.0.1: ###################################################################################################################################################################################################### | 100%
ca-certificates 2018.03.07: ###################################################################################################################################################################################### | 100%
Preparing transaction: done
Verifying transaction: done
Executing transaction: done
#
# To activate this environment, use:
# > source activate py27
#
# To deactivate an active environment, use:
# > source deactivate
#

➜ redundans git:(master) ✗ source activate py27

Bioinformatics JRF vacancy at ICGEB, New Delhi

Wed, 23 Jul 2014 16:07:15 -0500

Junior Research Fellow for a DBT sponsored project entitled "Computational and experimental characterization of stage specific arginine methylation in P. falciparum proteome".

Candidates should have a 1st class MSc/MTech/BTech degree in Bioinformatics. Please send complete CV, quoting Application for RMETH-JRF-2014, by email to Dr. Dinesh Gupta: dinesh@icgeb.res.in

Closing date for applications: 6 August 2014

More at http://www.icgeb.org/tl_files/Vacancies/JRF.pdf

Python Mini Projects !

BioStar — Mon, 16 Jan 2023 02:14:03 -0600

There is a directory for each chapter of the book. Each directory contains a test.py program you can use with pytest to check that you have written the program correctly. I have included a short README to describe each exercise. If you have problems writing code (or if you would like to support this project!), the book contains details about the skills you need.

https://github.com/kyclark/tiny_python_projects

Address of the bookmark: https://github.com/kyclark/tiny_python_projects

Linux Sort Commands for Bioinformatics

Rahul Nayak — Sat, 31 May 2014 15:41:16 -0500

Almost all the scripting languages such as Perl, Python etc have built-in sort, but unfortunately none of them are as flexible as sort command. But one when it come to space efficiency GNU sort stands at the top. It can sort a 20Gb file with less than 2Gb memory. It is not trivial to implement so powerful a sort by yourself.

sort a space-delimited file based on its first column, then the second if the first is the same, and so on:
sort input.txt

sort a huge file (GNU sort ONLY):
sort -S 1500M -t $HOME/tmp input.txt > sorted.txt

sort starting from the third column, skipping the first two columns:
sort +2 input.txt

sort the second column as numbers, descending order; if identical, sort the 3rd as strings, ascending order:
sort -k2,2nr -k3,3 input.txt

sort starting from the 4th character at column 2, as numbers:
sort -k2.4n input.txt

More Linxu sort command information

If you have any sort commands you'd like to share, please add them to our comments section below. For more help, you can also type:

man sort

or

sort --help

on your Unix/Linux system.