The primary home page for DendroPy, with detailed tutorials and documentation, is at:

http://dendropy.org/

DendroPy is also hosted in the official Python repository:

http://packages.python.org/DendroPy/

Address of the bookmark: https://pypi.org/project/DendroPy/

python -V

at the terminal. For purposes of this example we'll assume you have 3.1 installed. You'll next need to execute the following commands:

sudo apt-get install python2.6 idle-python2.6
sudo update-alternatives --install /usr/bin/python python /usr/bin/python3.1 1
sudo update-alternatives --install /usr/bin/python python /usr/bin/python2.6 10
sudo update-alternatives --config python

This last command will allow you to choose which version of python to use by default. If you have done everything above correctly, python2.6 should already be set as the default. If it is not, choose it to be the default. From now on, running python should start version 2.6.

sudo update-alternatives --remove-all python
sudo ln -s python3.1 /usr/bin/python

Address of the bookmark: https://github.com/google/nucleus

Run pip install luigi to install the latest stable version from PyPI. Documentation for the latest release is hosted on readthedocs.

Run pip install luigi[toml] to install Luigi with TOML-based configs support.

Address of the bookmark: https://github.com/spotify/luigi

Use the Terminal or an Anaconda Prompt for the following steps.

1. To create an environment:

   conda create --name myenv
   

   NOTE: Replace myenv with the environment name.

2. When conda asks you to proceed, type y:

   proceed ([y]/n)?
   

This creates the myenv environment in /envs/. This environment uses the same version of Python that you are currently using, because you did not specify a version.

To create an environment with a specific version of Python:

conda create -n myenv python=3.4

To create an environment with a specific package:

conda create -n myenv scipy

OR:

conda create -n myenv python
conda install -n myenv scipy

To create an environment with a specific version of a package:

conda create -n myenv scipy=0.15.0

OR:

conda create -n myenv python
conda install -n myenv scipy=0.15.0

To create an environment with a specific version of Python and multiple packages:

conda create -n myenv python=3.4 scipy=0.15.0 astroid babel

TIP: Install all the programs that you want in this environment at the same time. Installing 1 program at a time can lead to dependency conflicts.

To automatically install pip or another program every time a new environment is created, add the default programs to the create_default_packages section of your .condarc configuration file. The default packages are installed every time you create a new environment. If you do not want the default packages installed in a particular environment, use the --no-default-packages flag:

conda create --no-default-packages -n myenv python

TIP: You can add much more to the conda create command. For details, run conda create --help.

➜ redundans git:(master) ✗ conda create --name py27 python=2.7
Solving environment: done

==> WARNING: A newer version of conda exists. <==
current version: 4.5.0
latest version: 4.5.2

Please update conda by running

$ conda update -n base conda

## Package Plan ##

environment location: /home/urbe/anaconda3/envs/py27

added / updated specs:
- python=2.7

The following packages will be downloaded:

package | build
---------------------------|-----------------
wheel-0.31.0 | py27_0 61 KB
python-2.7.15 | h1571d57_0 12.1 MB
certifi-2018.4.16 | py27_0 142 KB
sqlite-3.23.1 | he433501_0 1.5 MB
setuptools-39.1.0 | py27_0 582 KB
openssl-1.0.2o | h20670df_0 3.4 MB
pip-10.0.1 | py27_0 1.7 MB
ca-certificates-2018.03.07 | 0 124 KB
------------------------------------------------------------
Total: 19.6 MB

The following NEW packages will be INSTALLED:

ca-certificates: 2018.03.07-0
certifi: 2018.4.16-py27_0
libedit: 3.1-heed3624_0
libffi: 3.2.1-hd88cf55_4
libgcc-ng: 7.2.0-hdf63c60_3
libstdcxx-ng: 7.2.0-hdf63c60_3
ncurses: 6.0-h9df7e31_2
openssl: 1.0.2o-h20670df_0
pip: 10.0.1-py27_0
python: 2.7.15-h1571d57_0
readline: 7.0-ha6073c6_4
setuptools: 39.1.0-py27_0
sqlite: 3.23.1-he433501_0
tk: 8.6.7-hc745277_3
wheel: 0.31.0-py27_0
zlib: 1.2.11-ha838bed_2

Proceed ([y]/n)? y

Downloading and Extracting Packages
wheel 0.31.0: #################################################################################################################################################################################################### | 100%
python 2.7.15: ################################################################################################################################################################################################### | 100%
certifi 2018.4.16: ############################################################################################################################################################################################### | 100%
sqlite 3.23.1: ################################################################################################################################################################################################### | 100%
setuptools 39.1.0: ############################################################################################################################################################################################### | 100%
openssl 1.0.2o: ################################################################################################################################################################################################## | 100%
pip 10.0.1: ###################################################################################################################################################################################################### | 100%
ca-certificates 2018.03.07: ###################################################################################################################################################################################### | 100%
Preparing transaction: done
Verifying transaction: done
Executing transaction: done
#
# To activate this environment, use:
# > source activate py27
#
# To deactivate an active environment, use:
# > source deactivate
#

➜ redundans git:(master) ✗ source activate py27

https://github.com/kyclark/tiny_python_projects

Address of the bookmark: https://github.com/kyclark/tiny_python_projects

1. Research Associate
Emoluments*: 14880/- + HRA
Qualification needed: Ph.D/M.Sc in Bioinformatics or Ph.D/M.Sc in Agriculture or Biotechnology with advanced Diploma in Bioinformatics
Desirable: 2 year experience in Bioinformatics.

2 Senior Research Fellow
Emoluments*: 10230/-
Qualification needed: M.Sc/ M.tech in Bioinformatics or M.Sc in Agriculture/ Biotechnology with Diploma in Bioinformatics.
Desirable: One year experience in Bioinformatics

3 Junior Research Fellow
Emoluments*: 9300/-
Qualification needed: M.Sc/ M.tech in Bioinformatics or M.Sc in Agriculture/Biotechnology/Plant Sciences with Diploma in Bioinformatics.

4 .Trainee/Studentship Bioinformatics
Emoluments*: 5000/-
Qualification needed: M.Sc in Bioinformatics with good knowledge of Bioinformatics softwares and tools.

5 Trainee/ Studentship Biotechnology
Emoluments*: 5000/-
Qualification needed: M.Sc in Biotechnology, with working knowledge in tissue culture, molecular markers and cloning of genes.

Candidates with the required qualifications and experience may give an application in the prescribed format with attested copies of certificates to prove eligibility on or before 30th November 2014. The applications are to be addressed to The Associate Dean, College of Horticulture and send to "Professor & Coordinator, Bioinformatics Centre (DIC), IT-BT Complex, Kerala Agricultural University, Vellanikkara, Thrissur, Kerala 680 656”. The envelope may be superscribed “Application for the post at Bioinformatics Centre”.

*Emoluments are likely to be revised in 2014-2015

More at http://www.kaubic.in/downloads/Notification_bic.pdf
http://www.kaubic.in/downloads/Application%20form.pdf

Address of the bookmark: http://pevsnerlab.kennedykrieger.org/php/?q=software

PRINCIPAL SCIENTIST Pay Band: Minimum pay of `43,000 in the PB-4 of `37400-67000/- + RGP of `10,000/-.

Age: The candidates must not have attained the age of 52 years as on 24.03.2015. There shall be no age limit for the Council’s employees.

ICAR-NATIONAL INSTITUTE OF BIOTIC STRESS MANAGEMENT, RAIPUR (CHHATTISGARH)

57. Principal Scientist (Agricultural Entomology) (Two post)

Qualifications Essential:

(i) Doctoral degree in Agricultural Entomology including relevant basic sciences.

(ii) 10 years experience in the relevant subject out of which at least 8 years should be as Scientist/ Lecturer/Extension Specialist or in an equivalent position in the Pay Band- 3 of `15600-39100 with Grade Pay of `5400/`6000/`7000/`8000 and 2 years as a Senior Scientist or in an equivalent position in the Pay Band- 4 of ` 37400-67000 with Grade Pay of ` 8700/ ` 9000.

(iii) The candidate should have made contribution to research/teaching/extension education as evidenced by published work/innovations and impact.

Desirable:

(i) Experience of using frontiers research tools in management of insect pests of crop plants.

(ii) Evidence of contributions to relevant field through publications/ patents/citation index to suggest a vision/perspective in biotic stress research.

61. Principal Scientist (Bioinformatics) (One post)

Qualifications Essential:

(i) Doctoral degree in Bioinformatics including relevant basic sciences. (ii) & (iii) As in item no. 57 above.

Desirable:

(i) Experience of using bioinformatics for advancement of knowledge and for research on biotic stress management.

(ii) Evidence of contributions to relevant field through publications/patents/citation index to suggest a vision/perspective in biotic stress research.

http://asrb.org.in/administrator/uploads_dir/1424859407english.pdf