BOL: Related items

R Graphical Cookbook by Winston Chang

Abhimanyu Singh — Fri, 04 Nov 2016 12:50:30 -0500

R Graphical Cookbook by Winston Chang

A very nice book by Winston Chang for R ethusiast. The R code presented in these pages is the R code actually used to produce the Figures in the book. There will be differences compared to the code chunks shown in the text of the book, but in most cases the differences will be that these pages contain additional code to lay out multiple plots on a single "page".

The code presented for each figure is self-contained, i.e., all code required to produce the figure is included. This means that there is sometimes considerable overlap of code between several figures In some cases, it may be necessary to install an add-on package from CRAN to get the code to run.

More books at http://www.e-reading.club/bookreader.php/137370/C486x_APPb.pdf

Method in Comparative genomics !!

Jit — Wed, 09 Nov 2016 16:29:24 -0600

We present methods for the automatic determination of genome correspondence. The algorithms enabled the automatic identification of orthologs for more than 90% of genes and intergenic regions across the four species despite the large number of duplicated genes in the yeast genome. The remaining ambiguities in the gene correspondence revealed recent gene family expansions in regions of rapid genomic change.

We present methods for the identification of protein-coding genes based on their patterns of nucleotide conservation across related species. We observed the pressure to conserve the reading frame of functional proteins and developed a test for gene identification with high sensitivity and specificity. We used this test to revisit the genome of S. cerevisiae, reducing the overall gene count by 500 genes (10% of previously annotated genes) and refining the gene structure of hundreds of genes. We present novel methods for the systematic de novo identification of regulatory motifs. The methods do not rely on previous knowledge of gene function and in that way differ from the current literature on computational motif discovery. Based on the genome-wide conservation patterns of known motifs, we developed three conservation criteria that we used to discover novel motifs. We used an enumeration approach to select strongly conserved motif cores, which we extended and collapsed into a small number of candidate regulatory motifs. These include most previously known regulatory motifs as well as several noteworthy novel motifs. The majority of discovered motifs are enriched in functionally related genes, allowing us to infer a candidate function for novel motifs.

Our results demonstrate the power of comparative genomics to further our understanding of any species. Our methods are validated by the extensive experimental knowledge in yeast, and will be invaluable in the study of complex genomes like that of human.

Address of the bookmark: http://web.mit.edu/manoli/www/publications/Kellis_JCB_04.pdf

EXCAVATOR2tool

Bulbul — Wed, 30 Nov 2016 04:09:19 -0600

EXCAVATOR2 is a collection of bash, R and Fortran scripts and codes that analyses Whole Exome Sequencing (WES) data to identify CNVs. EXCAVATOR2 enhances the identification of all genomic CNVs, both overlapping and non-overlapping targeted exons by integrating the analysis of In-targets and Off- targets reads. Specifically, it improves the precision of calling CNVs overlapping targeted exons from WES data and enlarges the spectrum of detectable CNVs to off-target events.
EXCAVATOR2 can be effectively employed for the identification of CNVs in small as well as large-scale re-sequencing population and cancer studies. Lastly, it’s of particular interest that all WES experiments can be re-analysed using our method with the beneficial effect to identify novelCNVs in extra-exonic regions by having the full-genome CN profile.

Address of the bookmark: https://sourceforge.net/projects/excavator2tool/

MyPro: A seamless pipeline for automated prokaryotic genome assembly and annotation

Neel — Thu, 15 Dec 2016 05:47:35 -0600

MyPro is an improved genomics software pipeline for prokaryotic genomes. MyPro is user-friendly and requires minimal programming skills. High-quality prokaryotic genome assembly and annotation can be obtained with ease. It performed better than de novo assemblers and contig integration software. Produces more contiguous assemblies, higher N50 values and lower number of contigs.

More at https://sourceforge.net/projects/sb2nhri/files/MyPro/

Address of the bookmark: http://www.sciencedirect.com/science/article/pii/S0167701215001207

GAM-NGS: genomic assemblies merger for next generation sequencing

Jit — Mon, 19 Dec 2016 06:07:05 -0600

GAM-NGS (Genomic Assemblies Merger for Next Generation Sequencing), whose primary goal is to merge two or more assemblies in order to enhance contiguity and correctness of both. GAM-NGS does not rely on global alignment: regions of the two assemblies representing the same genomic locus (called blocks) are identified through reads' alignments and stored in a weightedgraph. The merging phase is carried out with the help of this weighted graph that allows an optimal resolution of local problematic regions.

Address of the bookmark: https://github.com/vice87/gam-ngs

Genome Assembly Tutorial

Abhimanyu Singh — Tue, 20 Dec 2016 07:56:01 -0600

If genomes were completely random sequences in a statistical sense, 'overlap-consensus-layout' method would have been enough to assemble large genomes from Sanger reads. In contrast, real genomes often have long repetitive regions, and they are hard to assemble using overlap-consensus-layout approach. De Bruijn graph-based assembly approach was originally proposed to handle the assembly of repetitive regions better.

More at http://www.homolog.us/Tutorials/index.php?p=1.4&s=1

Address of the bookmark: http://www.homolog.us/Tutorials/index.php?p=1.4&s=1

GenomeRing: alignment visualization based on SuperGenome coordinates

Neel — Wed, 18 Jan 2017 10:24:10 -0600

The number of completely sequenced genomes is continuously rising, allowing for comparative analyses of genomic variation. Such analyses are often based on whole-genome alignments to elucidate structural differences arising from insertions, deletions or from rearrangement events. Computational tools that can visualize genome alignments in a meaningful manner are needed to help researchers gain new insights into the underlying data. Such visualizations typically are either realized in a linear fashion as in genome browsers or by using a circular approach, where relationships between genomic regions are indicated by arcs. Both methods allow for the integration of additional information such as experimental data or annotations. However, providing a visualization that still allows for a quick and comprehensive interpretation of all important genomic variations together with various supplemental data, which may be highly heterogeneous, remains a challenge.

More at https://academic.oup.com/bioinformatics/article/28/12/i7/268598/GenomeRing-alignment-visualization-based-on

Address of the bookmark: http://it.informatik.uni-tuebingen.de/?page_id=185

Cgaln

Jit — Wed, 22 Feb 2017 05:14:15 -0600

Cgaln (Coarse grained alignment) is a program designed to align a pair of whole genomic sequences of not only bacteria but also entire chromosomes of vertebrates on a nominal desktop computer. Cgaln performs an alignment job in two steps, at the block level and then at the nucleotide level. The former "coarse-grained" alignment can explore genomic rearrangements and reduce the regions to be analyzed in the next step. The latter is devoted to detailed alignment within the limited regions found in the first stage. The output of Cgaln is 'glocal' in the sense that rearrangements are taken into consideration while each alignable region is extended as long as possible. Thus, Cgaln is not only fast and memory-efficient, but also can filter noisy outputs without missing the most important homologous segment pairs.

http://www.iam.u-tokyo.ac.jp/chromosomeinformatics/rnakato/cgaln/

Address of the bookmark: http://www.iam.u-tokyo.ac.jp/chromosomeinformatics/rnakato/cgaln/

Mercator

Jit — Mon, 06 Feb 2017 04:20:36 -0600

Our basic strategy in building homology maps is to use exons that are orthologous in multiple genomes as map "anchors." Given K genomes, the steps in the map construction are as follows:

For each genome, obtain a set of exon annotations. These annotations can be a combination of both exon predictions (e.g. Genscan) and annotations that have been experimentally verified (e.g. RefSeq). Ideally, we would like to have these annotations be as sensitive as possible. Specificity is not a concern, as incorrect annotations are not likely not have significant alignments with other gene annotations.
Compare all exons against all exons in other genomes and record significant alignments between exons. Currently, we use BLAT to do this all-vs-all comparison with alignments being performed in protein space.
Construct a graph with each vertex corresponding to a exon and edges between vertices whose corresponding exons have significant alignments.
Identify cliques in this graph. These cliques are potential anchors to be used in the map.
Starting with the largest cliques (those that have exons in all or most of the genomes), join neighboring (adjacent in genomic coordinates, in each genome) cliques to form runs. Smaller cliques that are inconsistent with runs formed by larger cliques are filtered out. After the smallest cliques have been considered, cliques that are not part of a run are discarded.
The extents of each run in each genome are outputted as orthologous segments. The cliques from each run are used to output the exact genomic coordinates of anchors within each orthologous segment. These anchors can be used by genomic alignment programs (such as MAVID) to do a detailed alignment of each orthologous segment.

https://www.biostat.wisc.edu/~cdewey/mercator/

Address of the bookmark: https://www.biostat.wisc.edu/~cdewey/mercator/

ConPADE: Genome Assembly Ploidy Estimation from Next-Generation Sequencing Data

Jit — Fri, 24 Feb 2017 04:55:41 -0600

ConPADE (Contig Ploidy and Allele Dosage Estimation), a probabilistic method that estimates the ploidy of any given contig/scaffold based on its allele proportions. In the process, they report findings regarding errors in sequencing. The method can be used for whole genome shotgun (WGS) sequencing data. They also show applicability of the method for variant calling and allele dosage estimation. Results for simulated and real datasets are discussed and provide evidence that ConPADE performs well as long as enough sequencing coverage is available, or the true contig ploidy is low.

https://github.com/microsoftgenomics

Address of the bookmark: https://github.com/microsoftgenomics