BOL: Related items

Scientists map 17,294 proteins produced in human body

Jit — Thu, 29 May 2014 01:57:55 -0500

Indian scientists missed the genomic profiling bus, but they've more than made up for it by creating the first human proteome map which is an extension of the genomic study. Till now, here is no direct equivalent for the human proteome. But recently two groups present mass spectrometry-based analysis of human tissues, body fluids and cells mapping the large majority of the human proteome.

The Indian scientists working in Bangalore, along with their American counterparts, have mapped more than 17,000 proteins in 30 organs of the human body. Just like the human genome was sequenced around the turn of the millennium, this is an equivalent mapping of the human proteome.

The researcher estimated there are around 20,500 proteins in the human body. These scientists have profiled around 17,294, which account for around 84% of the total proteins. Apart from this, the team also traced around 2,500 of 3,000 proteins that had been categorised as "missing proteins".

The work, done by group of Indian scientists, and Johns Hopkins University, published in the renowned journal Nature ( http://www.nature.com/nature/journal/v509/n7502/full/nature13302.html ). Of the 72 people who worked on the project, 46 are Indians.

Reference:

http://www.nature.com/nature/journal/v509/n7502/full/nature13302.html

http://www.proteinatlas.org/ -The antibody-based Human Protein Atlas programme

http://www.humanproteomemap.org/ -Proteogenomic analysis by identifying translated proteins from annotated pseudogenes, non-coding RNAs and untranslated regions.

https://www.proteomicsdb.org/ -Assembled protein evidence for 18,097 genes in ProteomicsDB

Installing Bio::SCF perl module

Jit — Mon, 09 Apr 2018 04:04:29 -0500

Most Perl modules are written in Perl, some use XS (they are written in C) so require a C compiler (it's easy to get this setup - don't panic), see your OS of choice below to find out how to get the right compiler. Modules may have dependencies on other modules (almost always on CPAN) and cannot be installed without them (or without a specific version of them). Many modules on CPAN require a somewhat recent version of Perl (version 5.8 or above).

More about the basic perl module installation steps check this http://bioinformaticsonline.com/blog/view/710/how-to-install-perl-modules-manually-using-cpan-command-and-other-quick-ways

installing Bio::SCF perl module is daunting task, specieally because of it dependencies. Here is the steps, you need to follow to sucessfully install Bio::SCF module

#sudo apt-get install libbio-scf-perl #trev for visualization of scf file

1. You will need the zlib library which can be found at http://www.zlib.net/.

install zlib library first:

jitendra@jitendra-UNLOCK-INSTALL[zlib-1.2.11] ./configure []
Checking for gcc...
Checking for shared library support...
Building shared library libz.so.1.2.11 with gcc.
Checking for size_t... Yes.
Checking for off64_t... Yes.
Checking for fseeko... Yes.
Checking for strerror... Yes.
Checking for unistd.h... Yes.
Checking for stdarg.h... Yes.
Checking whether to use vs[n]printf() or s[n]printf()... using vs[n]printf().
Checking for vsnprintf() in stdio.h... Yes.
Checking for return value of vsnprintf()... Yes.
Checking for attribute(visibility) support... Yes.
jitendra@jitendra-UNLOCK-INSTALL[zlib-1.2.11] make []
gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -I. -c -o example.o test/example.c
gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -c -o adler32.o adler32.c
gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -c -o crc32.o crc32.c
gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -c -o deflate.o deflate.c
gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -c -o infback.o infback.c
gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -c -o inffast.o inffast.c
gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -c -o inflate.o inflate.c
gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -c -o inftrees.o inftrees.c
gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -c -o trees.o trees.c
gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -c -o zutil.o zutil.c
gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -c -o compress.o compress.c
gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -c -o uncompr.o uncompr.c
gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -c -o gzclose.o gzclose.c
gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -c -o gzlib.o gzlib.c
gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -c -o gzread.o gzread.c
gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -c -o gzwrite.o gzwrite.c
ar rc libz.a adler32.o crc32.o deflate.o infback.o inffast.o inflate.o inftrees.o trees.o zutil.o compress.o uncompr.o gzclose.o gzlib.o gzread.o gzwrite.o
gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -o example example.o -L. libz.a
gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -I. -c -o minigzip.o test/minigzip.c
gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -o minigzip minigzip.o -L. libz.a
gcc -O3 -fPIC -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -DPIC -c -o objs/adler32.o adler32.c
gcc -O3 -fPIC -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -DPIC -c -o objs/crc32.o crc32.c
gcc -O3 -fPIC -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -DPIC -c -o objs/deflate.o deflate.c
gcc -O3 -fPIC -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -DPIC -c -o objs/infback.o infback.c
gcc -O3 -fPIC -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -DPIC -c -o objs/inffast.o inffast.c
gcc -O3 -fPIC -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -DPIC -c -o objs/inflate.o inflate.c
gcc -O3 -fPIC -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -DPIC -c -o objs/inftrees.o inftrees.c
gcc -O3 -fPIC -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -DPIC -c -o objs/trees.o trees.c
gcc -O3 -fPIC -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -DPIC -c -o objs/zutil.o zutil.c
gcc -O3 -fPIC -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -DPIC -c -o objs/compress.o compress.c
gcc -O3 -fPIC -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -DPIC -c -o objs/uncompr.o uncompr.c
gcc -O3 -fPIC -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -DPIC -c -o objs/gzclose.o gzclose.c
gcc -O3 -fPIC -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -DPIC -c -o objs/gzlib.o gzlib.c
gcc -O3 -fPIC -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -DPIC -c -o objs/gzread.o gzread.c
gcc -O3 -fPIC -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -DPIC -c -o objs/gzwrite.o gzwrite.c
gcc -shared -Wl,-soname,libz.so.1,--version-script,zlib.map -O3 -fPIC -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -o libz.so.1.2.11 adler32.lo crc32.lo deflate.lo infback.lo inffast.lo inflate.lo inftrees.lo trees.lo zutil.lo compress.lo uncompr.lo gzclose.lo gzlib.lo gzread.lo gzwrite.lo -lc
rm -f libz.so libz.so.1
ln -s libz.so.1.2.11 libz.so
ln -s libz.so.1.2.11 libz.so.1
gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -o examplesh example.o -L. libz.so.1.2.11
gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -o minigzipsh minigzip.o -L. libz.so.1.2.11
gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -I. -D_FILE_OFFSET_BITS=64 -c -o example64.o test/example.c
gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -o example64 example64.o -L. libz.a
gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -I. -D_FILE_OFFSET_BITS=64 -c -o minigzip64.o test/minigzip.c
gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -o minigzip64 minigzip64.o -L. libz.a
jitendra@jitendra-UNLOCK-INSTALL[zlib-1.2.11] sudo make install []
[sudo] password for jitendra:
rm -f /usr/local/lib/libz.a
cp libz.a /usr/local/lib
chmod 644 /usr/local/lib/libz.a
cp libz.so.1.2.11 /usr/local/lib
chmod 755 /usr/local/lib/libz.so.1.2.11
rm -f /usr/local/share/man/man3/zlib.3
cp zlib.3 /usr/local/share/man/man3
chmod 644 /usr/local/share/man/man3/zlib.3
rm -f /usr/local/lib/pkgconfig/zlib.pc
cp zlib.pc /usr/local/lib/pkgconfig
chmod 644 /usr/local/lib/pkgconfig/zlib.pc
rm -f /usr/local/include/zlib.h /usr/local/include/zconf.h
cp zlib.h zconf.h /usr/local/include
chmod 644 /usr/local/include/zlib.h /usr/local/include/zconf.h

2. Now make io_lib-1.9

In order to install this perl extension you have to install io-lib version 1.9 or higher from the Staden library (staden.sourceforge.net). This can be downloaded from https://sourceforge.net/project/showfiles.php?group_id=100316&package_id=108243&release_id=340318 confirm that the package installed correctly look for a library named "libread".

jitendra@jitendra-UNLOCK-INSTALL[io_lib-1.9.0] export CFLAGS="-fPIC" && ./configure
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ANSI C... none needed
checking for style of include used by make... GNU
checking dependency style of gcc... gcc3
checking for a BSD-compatible install... /usr/bin/install -c
checking for ranlib... ranlib
checking for main in -lz... yes
checking how to run the C preprocessor... gcc -E
checking for egrep... grep -E
checking for ANSI C header files... yes
checking for sys/wait.h that is POSIX.1 compatible... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking fcntl.h usability... yes
checking fcntl.h presence... yes
checking for fcntl.h... yes
checking limits.h usability... yes
checking limits.h presence... yes
checking for limits.h... yes
checking for unistd.h... (cached) yes
checking zlib.h usability... yes
checking zlib.h presence... yes
checking for zlib.h... yes
checking whether byte ordering is bigendian... no
checking for short... yes
checking size of short... 2
checking for int... yes
checking size of int... 4
checking for long... yes
checking size of long... 8
checking for inline... inline
checking for mode_t... yes
checking build system type... x86_64-unknown-linux-gnu
checking host system type... x86_64-unknown-linux-gnu
checking for cos in -lm... yes
checking for strdup... yes
configure: creating ./config.status
config.status: creating Makefile
config.status: creating read/Makefile
config.status: creating progs/Makefile
config.status: creating config.h
config.status: executing depfiles commands
jitendra@jitendra-UNLOCK-INSTALL[io_lib-1.9.0] make []
make all-recursive
make[1]: Entering directory '/home/jitendra/Downloads/io_lib-1.9.0'
Making all in read
make[2]: Entering directory '/home/jitendra/Downloads/io_lib-1.9.0/read'
if gcc -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I../include -I../read -I../alf -I../abi -I../ctf -I../ztr -I../plain -I../scf -I../exp_file -I../utils -I/usr/local/include -fPIC -MT Read.o -MD -MP -MF ".deps/Read.Tpo" -c -o Read.o Read.c; \
then mv -f ".deps/Read.Tpo" ".deps/Read.Po"; else rm -f ".deps/Read.Tpo"; exit 1; fi
if gcc -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I../include -I../read -I../alf -I../abi -I../ctf -I../ztr -I../plain -I../scf -I../exp_file -I../utils -I/usr/local/include -fPIC -MT scf_extras.o -MD -MP -MF ".deps/scf_extras.Tpo" -c -o scf_extras.o scf_extras.c; \
then mv -f ".deps/scf_extras.Tpo" ".deps/scf_extras.Po"; else rm -f ".deps/scf_extras.Tpo"; exit 1; fi
if gcc -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I../include -I../read -I../alf -I../abi -I../ctf -I../ztr -I../plain -I../scf -I../exp_file -I../utils -I/usr/local/include -fPIC -MT translate.o -MD -MP -MF ".deps/translate.Tpo" -c -o translate.o translate.c; \
then mv -f ".deps/translate.Tpo" ".deps/translate.Po"; else rm -f ".deps/translate.Tpo"; exit 1; fi
if gcc -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I../include -I../read -I../alf -I../abi -I../ctf -I../ztr -I../plain -I../scf -I../exp_file -I../utils -I/usr/local/include -fPIC -MT compression.o -MD -MP -MF ".deps/compression.Tpo" -c -o compression.o `test -f '../ztr/compression.c' || echo './'`../ztr/compression.c; \
then mv -f ".deps/compression.Tpo" ".deps/compression.Po"; else rm -f ".deps/compression.Tpo"; exit 1; fi
if gcc -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I../include -I../read -I../alf -I../abi -I../ctf -I../ztr -I../plain -I../scf -I../exp_file -I../utils -I/usr/local/include -fPIC -MT ztr.o -MD -MP -MF ".deps/ztr.Tpo" -c -o ztr.o `test -f '../ztr/ztr.c' || echo './'`../ztr/ztr.c; \
then mv -f ".deps/ztr.Tpo" ".deps/ztr.Po"; else rm -f ".deps/ztr.Tpo"; exit 1; fi
if gcc -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I../include -I../read -I../alf -I../abi -I../ctf -I../ztr -I../plain -I../scf -I../exp_file -I../utils -I/usr/local/include -fPIC -MT ztr_translate.o -MD -MP -MF ".deps/ztr_translate.Tpo" -c -o ztr_translate.o `test -f '../ztr/ztr_translate.c' || echo './'`../ztr/ztr_translate.c; \
then mv -f ".deps/ztr_translate.Tpo" ".deps/ztr_translate.Po"; else rm -f ".deps/ztr_translate.Tpo"; exit 1; fi
if gcc -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I../include -I../read -I../alf -I../abi -I../ctf -I../ztr -I../plain -I../scf -I../exp_file -I../utils -I/usr/local/include -fPIC -MT fpoint.o -MD -MP -MF ".deps/fpoint.Tpo" -c -o fpoint.o `test -f '../abi/fpoint.c' || echo './'`../abi/fpoint.c; \
then mv -f ".deps/fpoint.Tpo" ".deps/fpoint.Po"; else rm -f ".deps/fpoint.Tpo"; exit 1; fi
if gcc -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I../include -I../read -I../alf -I../abi -I../ctf -I../ztr -I../plain -I../scf -I../exp_file -I../utils -I/usr/local/include -fPIC -MT seqIOABI.o -MD -MP -MF ".deps/seqIOABI.Tpo" -c -o seqIOABI.o `test -f '../abi/seqIOABI.c' || echo './'`../abi/seqIOABI.c; \
then mv -f ".deps/seqIOABI.Tpo" ".deps/seqIOABI.Po"; else rm -f ".deps/seqIOABI.Tpo"; exit 1; fi
if gcc -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I../include -I../read -I../alf -I../abi -I../ctf -I../ztr -I../plain -I../scf -I../exp_file -I../utils -I/usr/local/include -fPIC -MT seqIOALF.o -MD -MP -MF ".deps/seqIOALF.Tpo" -c -o seqIOALF.o `test -f '../alf/seqIOALF.c' || echo './'`../alf/seqIOALF.c; \
then mv -f ".deps/seqIOALF.Tpo" ".deps/seqIOALF.Po"; else rm -f ".deps/seqIOALF.Tpo"; exit 1; fi
if gcc -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I../include -I../read -I../alf -I../abi -I../ctf -I../ztr -I../plain -I../scf -I../exp_file -I../utils -I/usr/local/include -fPIC -MT ctfCompress.o -MD -MP -MF ".deps/ctfCompress.Tpo" -c -o ctfCompress.o `test -f '../ctf/ctfCompress.c' || echo './'`../ctf/ctfCompress.c; \
then mv -f ".deps/ctfCompress.Tpo" ".deps/ctfCompress.Po"; else rm -f ".deps/ctfCompress.Tpo"; exit 1; fi
if gcc -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I../include -I../read -I../alf -I../abi -I../ctf -I../ztr -I../plain -I../scf -I../exp_file -I../utils -I/usr/local/include -fPIC -MT seqIOCTF.o -MD -MP -MF ".deps/seqIOCTF.Tpo" -c -o seqIOCTF.o `test -f '../ctf/seqIOCTF.c' || echo './'`../ctf/seqIOCTF.c; \
then mv -f ".deps/seqIOCTF.Tpo" ".deps/seqIOCTF.Po"; else rm -f ".deps/seqIOCTF.Tpo"; exit 1; fi
if gcc -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I../include -I../read -I../alf -I../abi -I../ctf -I../ztr -I../plain -I../scf -I../exp_file -I../utils -I/usr/local/include -fPIC -MT expFileIO.o -MD -MP -MF ".deps/expFileIO.Tpo" -c -o expFileIO.o `test -f '../exp_file/expFileIO.c' || echo './'`../exp_file/expFileIO.c; \
then mv -f ".deps/expFileIO.Tpo" ".deps/expFileIO.Po"; else rm -f ".deps/expFileIO.Tpo"; exit 1; fi
if gcc -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I../include -I../read -I../alf -I../abi -I../ctf -I../ztr -I../plain -I../scf -I../exp_file -I../utils -I/usr/local/include -fPIC -MT seqIOPlain.o -MD -MP -MF ".deps/seqIOPlain.Tpo" -c -o seqIOPlain.o `test -f '../plain/seqIOPlain.c' || echo './'`../plain/seqIOPlain.c; \
then mv -f ".deps/seqIOPlain.Tpo" ".deps/seqIOPlain.Po"; else rm -f ".deps/seqIOPlain.Tpo"; exit 1; fi
if gcc -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I../include -I../read -I../alf -I../abi -I../ctf -I../ztr -I../plain -I../scf -I../exp_file -I../utils -I/usr/local/include -fPIC -MT misc_scf.o -MD -MP -MF ".deps/misc_scf.Tpo" -c -o misc_scf.o `test -f '../scf/misc_scf.c' || echo './'`../scf/misc_scf.c; \
then mv -f ".deps/misc_scf.Tpo" ".deps/misc_scf.Po"; else rm -f ".deps/misc_scf.Tpo"; exit 1; fi
if gcc -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I../include -I../read -I../alf -I../abi -I../ctf -I../ztr -I../plain -I../scf -I../exp_file -I../utils -I/usr/local/include -fPIC -MT read_scf.o -MD -MP -MF ".deps/read_scf.Tpo" -c -o read_scf.o `test -f '../scf/read_scf.c' || echo './'`../scf/read_scf.c; \
then mv -f ".deps/read_scf.Tpo" ".deps/read_scf.Po"; else rm -f ".deps/read_scf.Tpo"; exit 1; fi
if gcc -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I../include -I../read -I../alf -I../abi -I../ctf -I../ztr -I../plain -I../scf -I../exp_file -I../utils -I/usr/local/include -fPIC -MT write_scf.o -MD -MP -MF ".deps/write_scf.Tpo" -c -o write_scf.o `test -f '../scf/write_scf.c' || echo './'`../scf/write_scf.c; \
then mv -f ".deps/write_scf.Tpo" ".deps/write_scf.Po"; else rm -f ".deps/write_scf.Tpo"; exit 1; fi
if gcc -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I../include -I../read -I../alf -I../abi -I../ctf -I../ztr -I../plain -I../scf -I../exp_file -I../utils -I/usr/local/include -fPIC -MT array.o -MD -MP -MF ".deps/array.Tpo" -c -o array.o `test -f '../utils/array.c' || echo './'`../utils/array.c; \
then mv -f ".deps/array.Tpo" ".deps/array.Po"; else rm -f ".deps/array.Tpo"; exit 1; fi
if gcc -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I../include -I../read -I../alf -I../abi -I../ctf -I../ztr -I../plain -I../scf -I../exp_file -I../utils -I/usr/local/include -fPIC -MT compress.o -MD -MP -MF ".deps/compress.Tpo" -c -o compress.o `test -f '../utils/compress.c' || echo './'`../utils/compress.c; \
then mv -f ".deps/compress.Tpo" ".deps/compress.Po"; else rm -f ".deps/compress.Tpo"; exit 1; fi
if gcc -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I../include -I../read -I../alf -I../abi -I../ctf -I../ztr -I../plain -I../scf -I../exp_file -I../utils -I/usr/local/include -fPIC -MT error.o -MD -MP -MF ".deps/error.Tpo" -c -o error.o `test -f '../utils/error.c' || echo './'`../utils/error.c; \
then mv -f ".deps/error.Tpo" ".deps/error.Po"; else rm -f ".deps/error.Tpo"; exit 1; fi
if gcc -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I../include -I../read -I../alf -I../abi -I../ctf -I../ztr -I../plain -I../scf -I../exp_file -I../utils -I/usr/local/include -fPIC -MT files.o -MD -MP -MF ".deps/files.Tpo" -c -o files.o `test -f '../utils/files.c' || echo './'`../utils/files.c; \
then mv -f ".deps/files.Tpo" ".deps/files.Po"; else rm -f ".deps/files.Tpo"; exit 1; fi
if gcc -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I../include -I../read -I../alf -I../abi -I../ctf -I../ztr -I../plain -I../scf -I../exp_file -I../utils -I/usr/local/include -fPIC -MT find.o -MD -MP -MF ".deps/find.Tpo" -c -o find.o `test -f '../utils/find.c' || echo './'`../utils/find.c; \
then mv -f ".deps/find.Tpo" ".deps/find.Po"; else rm -f ".deps/find.Tpo"; exit 1; fi
if gcc -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I../include -I../read -I../alf -I../abi -I../ctf -I../ztr -I../plain -I../scf -I../exp_file -I../utils -I/usr/local/include -fPIC -MT mach-io.o -MD -MP -MF ".deps/mach-io.Tpo" -c -o mach-io.o `test -f '../utils/mach-io.c' || echo './'`../utils/mach-io.c; \
then mv -f ".deps/mach-io.Tpo" ".deps/mach-io.Po"; else rm -f ".deps/mach-io.Tpo"; exit 1; fi
if gcc -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I../include -I../read -I../alf -I../abi -I../ctf -I../ztr -I../plain -I../scf -I../exp_file -I../utils -I/usr/local/include -fPIC -MT open_trace_file.o -MD -MP -MF ".deps/open_trace_file.Tpo" -c -o open_trace_file.o `test -f '../utils/open_trace_file.c' || echo './'`../utils/open_trace_file.c; \
then mv -f ".deps/open_trace_file.Tpo" ".deps/open_trace_file.Po"; else rm -f ".deps/open_trace_file.Tpo"; exit 1; fi
if gcc -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I../include -I../read -I../alf -I../abi -I../ctf -I../ztr -I../plain -I../scf -I../exp_file -I../utils -I/usr/local/include -fPIC -MT read_alloc.o -MD -MP -MF ".deps/read_alloc.Tpo" -c -o read_alloc.o `test -f '../utils/read_alloc.c' || echo './'`../utils/read_alloc.c; \
then mv -f ".deps/read_alloc.Tpo" ".deps/read_alloc.Po"; else rm -f ".deps/read_alloc.Tpo"; exit 1; fi
if gcc -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I../include -I../read -I../alf -I../abi -I../ctf -I../ztr -I../plain -I../scf -I../exp_file -I../utils -I/usr/local/include -fPIC -MT strings.o -MD -MP -MF ".deps/strings.Tpo" -c -o strings.o `test -f '../utils/strings.c' || echo './'`../utils/strings.c; \
then mv -f ".deps/strings.Tpo" ".deps/strings.Po"; else rm -f ".deps/strings.Tpo"; exit 1; fi
if gcc -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I../include -I../read -I../alf -I../abi -I../ctf -I../ztr -I../plain -I../scf -I../exp_file -I../utils -I/usr/local/include -fPIC -MT traceType.o -MD -MP -MF ".deps/traceType.Tpo" -c -o traceType.o `test -f '../utils/traceType.c' || echo './'`../utils/traceType.c; \
then mv -f ".deps/traceType.Tpo" ".deps/traceType.Po"; else rm -f ".deps/traceType.Tpo"; exit 1; fi
if gcc -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I../include -I../read -I../alf -I../abi -I../ctf -I../ztr -I../plain -I../scf -I../exp_file -I../utils -I/usr/local/include -fPIC -MT xalloc.o -MD -MP -MF ".deps/xalloc.Tpo" -c -o xalloc.o `test -f '../utils/xalloc.c' || echo './'`../utils/xalloc.c; \
then mv -f ".deps/xalloc.Tpo" ".deps/xalloc.Po"; else rm -f ".deps/xalloc.Tpo"; exit 1; fi
if gcc -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I../include -I../read -I../alf -I../abi -I../ctf -I../ztr -I../plain -I../scf -I../exp_file -I../utils -I/usr/local/include -fPIC -MT vlen.o -MD -MP -MF ".deps/vlen.Tpo" -c -o vlen.o `test -f '../utils/vlen.c' || echo './'`../utils/vlen.c; \
then mv -f ".deps/vlen.Tpo" ".deps/vlen.Po"; else rm -f ".deps/vlen.Tpo"; exit 1; fi
if gcc -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I../include -I../read -I../alf -I../abi -I../ctf -I../ztr -I../plain -I../scf -I../exp_file -I../utils -I/usr/local/include -fPIC -MT hash_table.o -MD -MP -MF ".deps/hash_table.Tpo" -c -o hash_table.o `test -f '../utils/hash_table.c' || echo './'`../utils/hash_table.c; \
then mv -f ".deps/hash_table.Tpo" ".deps/hash_table.Po"; else rm -f ".deps/hash_table.Tpo"; exit 1; fi
../utils/hash_table.c: In function ‘HashFileOpen’:
../utils/hash_table.c:920:21: warning: field precision specifier ‘.*’ expects argument of type ‘int’, but argument 3 has type ‘long int’ [-Wformat=]
sprintf(aname, "%.*s%s", cp-fname+1, fname, hf->archive);
^
if gcc -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I../include -I../read -I../alf -I../abi -I../ctf -I../ztr -I../plain -I../scf -I../exp_file -I../utils -I/usr/local/include -fPIC -MT mFILE.o -MD -MP -MF ".deps/mFILE.Tpo" -c -o mFILE.o `test -f '../utils/mFILE.c' || echo './'`../utils/mFILE.c; \
then mv -f ".deps/mFILE.Tpo" ".deps/mFILE.Po"; else rm -f ".deps/mFILE.Tpo"; exit 1; fi
rm -f libread.a
ar cru libread.a Read.o scf_extras.o translate.o compression.o ztr.o ztr_translate.o fpoint.o seqIOABI.o seqIOALF.o ctfCompress.o seqIOCTF.o expFileIO.o seqIOPlain.o misc_scf.o read_scf.o write_scf.o array.o compress.o error.o files.o find.o mach-io.o open_trace_file.o read_alloc.o strings.o traceType.o xalloc.o vlen.o hash_table.o mFILE.o
ar: `u' modifier ignored since `D' is the default (see `U')
ranlib libread.a
make[2]: Leaving directory '/home/jitendra/Downloads/io_lib-1.9.0/read'
Making all in progs
make[2]: Entering directory '/home/jitendra/Downloads/io_lib-1.9.0/progs'
if gcc -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I../read -I../alf -I../abi -I../ctf -I../ztr -I../plain -I../scf -I../exp_file -I../utils -I/usr/local/include -fPIC -MT convert_trace.o -MD -MP -MF ".deps/convert_trace.Tpo" -c -o convert_trace.o convert_trace.c; \
then mv -f ".deps/convert_trace.Tpo" ".deps/convert_trace.Po"; else rm -f ".deps/convert_trace.Tpo"; exit 1; fi
gcc -fPIC -o convert_trace convert_trace.o ../read/libread.a -lz -lm
../read/libread.a(open_trace_file.o): In function `find_file_url':
open_trace_file.c:(.text+0xaf4): warning: the use of `tempnam' is dangerous, better use `mkstemp'
if gcc -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I../read -I../alf -I../abi -I../ctf -I../ztr -I../plain -I../scf -I../exp_file -I../utils -I/usr/local/include -fPIC -MT makeSCF.o -MD -MP -MF ".deps/makeSCF.Tpo" -c -o makeSCF.o makeSCF.c; \
then mv -f ".deps/makeSCF.Tpo" ".deps/makeSCF.Po"; else rm -f ".deps/makeSCF.Tpo"; exit 1; fi
gcc -fPIC -o makeSCF makeSCF.o ../read/libread.a -lz -lm
../read/libread.a(open_trace_file.o): In function `find_file_url':
open_trace_file.c:(.text+0xaf4): warning: the use of `tempnam' is dangerous, better use `mkstemp'
if gcc -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I../read -I../alf -I../abi -I../ctf -I../ztr -I../plain -I../scf -I../exp_file -I../utils -I/usr/local/include -fPIC -MT extract_seq.o -MD -MP -MF ".deps/extract_seq.Tpo" -c -o extract_seq.o extract_seq.c; \
then mv -f ".deps/extract_seq.Tpo" ".deps/extract_seq.Po"; else rm -f ".deps/extract_seq.Tpo"; exit 1; fi
gcc -fPIC -o extract_seq extract_seq.o ../read/libread.a -lz -lm
../read/libread.a(open_trace_file.o): In function `find_file_url':
open_trace_file.c:(.text+0xaf4): warning: the use of `tempnam' is dangerous, better use `mkstemp'
if gcc -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I../read -I../alf -I../abi -I../ctf -I../ztr -I../plain -I../scf -I../exp_file -I../utils -I/usr/local/include -fPIC -MT index_tar.o -MD -MP -MF ".deps/index_tar.Tpo" -c -o index_tar.o index_tar.c; \
then mv -f ".deps/index_tar.Tpo" ".deps/index_tar.Po"; else rm -f ".deps/index_tar.Tpo"; exit 1; fi
gcc -fPIC -o index_tar index_tar.o
if gcc -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I../read -I../alf -I../abi -I../ctf -I../ztr -I../plain -I../scf -I../exp_file -I../utils -I/usr/local/include -fPIC -MT scf_dump.o -MD -MP -MF ".deps/scf_dump.Tpo" -c -o scf_dump.o scf_dump.c; \
then mv -f ".deps/scf_dump.Tpo" ".deps/scf_dump.Po"; else rm -f ".deps/scf_dump.Tpo"; exit 1; fi
gcc -fPIC -o scf_dump scf_dump.o ../read/libread.a -lz -lm
../read/libread.a(open_trace_file.o): In function `find_file_url':
open_trace_file.c:(.text+0xaf4): warning: the use of `tempnam' is dangerous, better use `mkstemp'
if gcc -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I../read -I../alf -I../abi -I../ctf -I../ztr -I../plain -I../scf -I../exp_file -I../utils -I/usr/local/include -fPIC -MT scf_info.o -MD -MP -MF ".deps/scf_info.Tpo" -c -o scf_info.o scf_info.c; \
then mv -f ".deps/scf_info.Tpo" ".deps/scf_info.Po"; else rm -f ".deps/scf_info.Tpo"; exit 1; fi
gcc -fPIC -o scf_info scf_info.o ../read/libread.a -lz -lm
../read/libread.a(open_trace_file.o): In function `find_file_url':
open_trace_file.c:(.text+0xaf4): warning: the use of `tempnam' is dangerous, better use `mkstemp'
if gcc -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I../read -I../alf -I../abi -I../ctf -I../ztr -I../plain -I../scf -I../exp_file -I../utils -I/usr/local/include -fPIC -MT scf_update.o -MD -MP -MF ".deps/scf_update.Tpo" -c -o scf_update.o scf_update.c; \
then mv -f ".deps/scf_update.Tpo" ".deps/scf_update.Po"; else rm -f ".deps/scf_update.Tpo"; exit 1; fi
gcc -fPIC -o scf_update scf_update.o ../read/libread.a -lz -lm
../read/libread.a(open_trace_file.o): In function `find_file_url':
open_trace_file.c:(.text+0xaf4): warning: the use of `tempnam' is dangerous, better use `mkstemp'
if gcc -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I../read -I../alf -I../abi -I../ctf -I../ztr -I../plain -I../scf -I../exp_file -I../utils -I/usr/local/include -fPIC -MT get_comment.o -MD -MP -MF ".deps/get_comment.Tpo" -c -o get_comment.o get_comment.c; \
then mv -f ".deps/get_comment.Tpo" ".deps/get_comment.Po"; else rm -f ".deps/get_comment.Tpo"; exit 1; fi
gcc -fPIC -o get_comment get_comment.o ../read/libread.a -lz -lm
../read/libread.a(open_trace_file.o): In function `find_file_url':
open_trace_file.c:(.text+0xaf4): warning: the use of `tempnam' is dangerous, better use `mkstemp'
if gcc -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I../read -I../alf -I../abi -I../ctf -I../ztr -I../plain -I../scf -I../exp_file -I../utils -I/usr/local/include -fPIC -MT hash_tar.o -MD -MP -MF ".deps/hash_tar.Tpo" -c -o hash_tar.o hash_tar.c; \
then mv -f ".deps/hash_tar.Tpo" ".deps/hash_tar.Po"; else rm -f ".deps/hash_tar.Tpo"; exit 1; fi
gcc -fPIC -o hash_tar hash_tar.o ../read/libread.a -lz -lm
if gcc -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I../read -I../alf -I../abi -I../ctf -I../ztr -I../plain -I../scf -I../exp_file -I../utils -I/usr/local/include -fPIC -MT hash_extract.o -MD -MP -MF ".deps/hash_extract.Tpo" -c -o hash_extract.o hash_extract.c; \
then mv -f ".deps/hash_extract.Tpo" ".deps/hash_extract.Po"; else rm -f ".deps/hash_extract.Tpo"; exit 1; fi
gcc -fPIC -o hash_extract hash_extract.o ../read/libread.a -lz -lm
if gcc -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I../read -I../alf -I../abi -I../ctf -I../ztr -I../plain -I../scf -I../exp_file -I../utils -I/usr/local/include -fPIC -MT trace_dump.o -MD -MP -MF ".deps/trace_dump.Tpo" -c -o trace_dump.o trace_dump.c; \
then mv -f ".deps/trace_dump.Tpo" ".deps/trace_dump.Po"; else rm -f ".deps/trace_dump.Tpo"; exit 1; fi
gcc -fPIC -o trace_dump trace_dump.o ../read/libread.a -lz -lm
../read/libread.a(open_trace_file.o): In function `find_file_url':
open_trace_file.c:(.text+0xaf4): warning: the use of `tempnam' is dangerous, better use `mkstemp'
make[2]: Leaving directory '/home/jitendra/Downloads/io_lib-1.9.0/progs'
make[2]: Entering directory '/home/jitendra/Downloads/io_lib-1.9.0'
make[2]: Leaving directory '/home/jitendra/Downloads/io_lib-1.9.0'
make[1]: Leaving directory '/home/jitendra/Downloads/io_lib-1.9.0'

jitendra@jitendra-UNLOCK-INSTALL[io_lib-1.9.0] sudo make install []
[sudo] password for jitendra:
Making install in read
make[1]: Entering directory '/home/jitendra/Downloads/io_lib-1.9.0/read'
make[2]: Entering directory '/home/jitendra/Downloads/io_lib-1.9.0/read'
test -z "/usr/local/lib" || mkdir -p -- "/usr/local/lib"
/usr/bin/install -c -m 644 'libread.a' '/usr/local/lib/libread.a'
ranlib '/usr/local/lib/libread.a'
make[2]: Nothing to be done for 'install-data-am'.
make[2]: Leaving directory '/home/jitendra/Downloads/io_lib-1.9.0/read'
make[1]: Leaving directory '/home/jitendra/Downloads/io_lib-1.9.0/read'
Making install in progs
make[1]: Entering directory '/home/jitendra/Downloads/io_lib-1.9.0/progs'
make[2]: Entering directory '/home/jitendra/Downloads/io_lib-1.9.0/progs'
test -z "/usr/local/bin" || mkdir -p -- "/usr/local/bin"
/usr/bin/install -c 'convert_trace' '/usr/local/bin/convert_trace'
/usr/bin/install -c 'makeSCF' '/usr/local/bin/makeSCF'
/usr/bin/install -c 'extract_seq' '/usr/local/bin/extract_seq'
/usr/bin/install -c 'index_tar' '/usr/local/bin/index_tar'
/usr/bin/install -c 'scf_dump' '/usr/local/bin/scf_dump'
/usr/bin/install -c 'scf_info' '/usr/local/bin/scf_info'
/usr/bin/install -c 'scf_update' '/usr/local/bin/scf_update'
/usr/bin/install -c 'get_comment' '/usr/local/bin/get_comment'
/usr/bin/install -c 'hash_tar' '/usr/local/bin/hash_tar'
/usr/bin/install -c 'hash_extract' '/usr/local/bin/hash_extract'
/usr/bin/install -c 'trace_dump' '/usr/local/bin/trace_dump'
make[2]: Nothing to be done for 'install-data-am'.
make[2]: Leaving directory '/home/jitendra/Downloads/io_lib-1.9.0/progs'
make[1]: Leaving directory '/home/jitendra/Downloads/io_lib-1.9.0/progs'
make[1]: Entering directory '/home/jitendra/Downloads/io_lib-1.9.0'
make[2]: Entering directory '/home/jitendra/Downloads/io_lib-1.9.0'
make[2]: Nothing to be done for 'install-exec-am'.
test -z "/usr/local/man/man3" || mkdir -p -- "/usr/local/man/man3"
/usr/bin/install -c -m 644 './man/man3/exp2read.3' '/usr/local/man/man3/exp2read.3'
/usr/bin/install -c -m 644 './man/man3/ExperimentFile.3' '/usr/local/man/man3/ExperimentFile.3'
/usr/bin/install -c -m 644 './man/man3/fread_reading.3' '/usr/local/man/man3/fread_reading.3'
/usr/bin/install -c -m 644 './man/man3/fread_scf.3' '/usr/local/man/man3/fread_scf.3'
/usr/bin/install -c -m 644 './man/man3/fwrite_reading.3' '/usr/local/man/man3/fwrite_reading.3'
/usr/bin/install -c -m 644 './man/man3/fwrite_scf.3' '/usr/local/man/man3/fwrite_scf.3'
/usr/bin/install -c -m 644 './man/man3/read2exp.3' '/usr/local/man/man3/read2exp.3'
/usr/bin/install -c -m 644 './man/man3/read2scf.3' '/usr/local/man/man3/read2scf.3'
/usr/bin/install -c -m 644 './man/man3/read_allocate.3' '/usr/local/man/man3/read_allocate.3'
/usr/bin/install -c -m 644 './man/man3/read_deallocate.3' '/usr/local/man/man3/read_deallocate.3'
/usr/bin/install -c -m 644 './man/man3/read_reading.3' '/usr/local/man/man3/read_reading.3'
/usr/bin/install -c -m 644 './man/man3/read_scf.3' '/usr/local/man/man3/read_scf.3'
/usr/bin/install -c -m 644 './man/man3/read_scf_header.3' '/usr/local/man/man3/read_scf_header.3'
/usr/bin/install -c -m 644 './man/man3/scf2read.3' '/usr/local/man/man3/scf2read.3'
/usr/bin/install -c -m 644 './man/man3/write_reading.3' '/usr/local/man/man3/write_reading.3'
/usr/bin/install -c -m 644 './man/man3/write_scf.3' '/usr/local/man/man3/write_scf.3'
/usr/bin/install -c -m 644 './man/man3/write_scf_header.3' '/usr/local/man/man3/write_scf_header.3'
test -z "/usr/local/man/man4" || mkdir -p -- "/usr/local/man/man4"
/usr/bin/install -c -m 644 './man/man4/Read.4' '/usr/local/man/man4/Read.4'
test -z "/usr/local/include/io_lib" || mkdir -p -- "/usr/local/include/io_lib"
/usr/bin/install -c -m 644 'read/Read.h' '/usr/local/include/io_lib/Read.h'
/usr/bin/install -c -m 644 'read/scf_extras.h' '/usr/local/include/io_lib/scf_extras.h'
/usr/bin/install -c -m 644 'read/translate.h' '/usr/local/include/io_lib/translate.h'
/usr/bin/install -c -m 644 'abi/abi.h' '/usr/local/include/io_lib/abi.h'
/usr/bin/install -c -m 644 'abi/fpoint.h' '/usr/local/include/io_lib/fpoint.h'
/usr/bin/install -c -m 644 'abi/seqIOABI.h' '/usr/local/include/io_lib/seqIOABI.h'
/usr/bin/install -c -m 644 'alf/alf.h' '/usr/local/include/io_lib/alf.h'
/usr/bin/install -c -m 644 'ctf/seqIOCTF.h' '/usr/local/include/io_lib/seqIOCTF.h'
/usr/bin/install -c -m 644 'exp_file/expFileIO.h' '/usr/local/include/io_lib/expFileIO.h'
/usr/bin/install -c -m 644 'plain/plain.h' '/usr/local/include/io_lib/plain.h'
/usr/bin/install -c -m 644 'scf/scf.h' '/usr/local/include/io_lib/scf.h'
/usr/bin/install -c -m 644 'utils/array.h' '/usr/local/include/io_lib/array.h'
/usr/bin/install -c -m 644 'utils/compress.h' '/usr/local/include/io_lib/compress.h'
/usr/bin/install -c -m 644 'utils/error.h' '/usr/local/include/io_lib/error.h'
/usr/bin/install -c -m 644 'utils/mach-io.h' '/usr/local/include/io_lib/mach-io.h'
/usr/bin/install -c -m 644 'utils/misc.h' '/usr/local/include/io_lib/misc.h'
/usr/bin/install -c -m 644 'utils/open_trace_file.h' '/usr/local/include/io_lib/open_trace_file.h'
/usr/bin/install -c -m 644 'utils/tar_format.h' '/usr/local/include/io_lib/tar_format.h'
/usr/bin/install -c -m 644 'utils/traceType.h' '/usr/local/include/io_lib/traceType.h'
/usr/bin/install -c -m 644 'utils/xalloc.h' '/usr/local/include/io_lib/xalloc.h'
/usr/bin/install -c -m 644 'utils/mFILE.h' '/usr/local/include/io_lib/mFILE.h'
/usr/bin/install -c -m 644 'utils/stdio_hack.h' '/usr/local/include/io_lib/stdio_hack.h'
/usr/bin/install -c -m 644 'utils/vlen.h' '/usr/local/include/io_lib/vlen.h'
/usr/bin/install -c -m 644 'utils/hash_table.h' '/usr/local/include/io_lib/hash_table.h'
/usr/bin/install -c -m 644 'utils/os.h' '/usr/local/include/io_lib/os.h'
/usr/bin/install -c -m 644 'ztr/compression.h' '/usr/local/include/io_lib/compression.h'
/usr/bin/install -c -m 644 'ztr/ztr.h' '/usr/local/include/io_lib/ztr.h'
make[2]: Leaving directory '/home/jitendra/Downloads/io_lib-1.9.0'
make[1]: Leaving directory '/home/jitendra/Downloads/io_lib-1.9.0'

3. Now install Bio::SCF

Now follows these steps:

tar zxf Bio::SCF.tar
cd Bio::SCF
perl Makefile.PL
make
make test
make install

jitendra@jitendra-UNLOCK-INSTALL[Bio-SCF-1.01] perl Makefile.PL []
Checking if your kit is complete...
Looks good
Generating a Unix-style Makefile
Writing Makefile for Bio::SCF
Writing MYMETA.yml and MYMETA.json
jitendra@jitendra-UNLOCK-INSTALL[Bio-SCF-1.01] make []
cp SCF.pm blib/lib/Bio/SCF.pm
cp SCF/Arrays.pm blib/lib/Bio/SCF/Arrays.pm
Running Mkbootstrap for Bio::SCF ()
chmod 644 "SCF.bs"
"/usr/bin/perl" "/usr/share/perl/5.22/ExtUtils/xsubpp" -typemap "/usr/share/perl/5.22/ExtUtils/typemap" SCF.xs > SCF.xsc && mv SCF.xsc SCF.c
Please specify prototyping behavior for SCF.xs (see perlxs manual)
x86_64-linux-gnu-gcc -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -DVERSION=\"1.01\" -DXS_VERSION=\"1.01\" -fPIC "-I/usr/lib/x86_64-linux-gnu/perl/5.22/CORE" -DLITTLE_ENDIAN SCF.c
In file included from /usr/lib/x86_64-linux-gnu/perl/5.22/CORE/perl.h:5546:0,
from SCF.xs:5:
SCF.xs: In function ‘XS_Bio__SCF_get_scf_pointer’:
SCF.xs:57:20: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
ret_val = newSViv((int)scf_data);
^
/usr/lib/x86_64-linux-gnu/perl/5.22/CORE/embed.h:402:40: note: in definition of macro ‘newSViv’
#define newSViv(a) Perl_newSViv(aTHX_ a)
^
SCF.xs: In function ‘XS_Bio__SCF_get_scf_fpointer’:
SCF.xs:80:20: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
ret_val = newSViv((int)scf_data);
^
/usr/lib/x86_64-linux-gnu/perl/5.22/CORE/embed.h:402:40: note: in definition of macro ‘newSViv’
#define newSViv(a) Perl_newSViv(aTHX_ a)
^
SCF.xs: In function ‘XS_Bio__SCF_scf_free’:
SCF.xs:89:17: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
scf_deallocate((Scf *)scf_pointer);
^
SCF.xs: In function ‘XS_Bio__SCF_get_comments’:
SCF.xs:95:18: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
Scf *scf_data = (Scf *)scf_pointer;
^
SCF.xs: In function ‘XS_Bio__SCF_set_comments’:
SCF.xs:108:18: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
Scf *scf_data = (Scf *)scf_pointer;
^
SCF.xs: In function ‘XS_Bio__SCF_scf_write’:
SCF.xs:121:18: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
Scf *scf_data = (Scf *)scf_pointer;
^
SCF.xs: In function ‘XS_Bio__SCF_scf_fwrite’:
SCF.xs:137:18: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
Scf *scf_data = (Scf *)scf_pointer;
^
SCF.xs: In function ‘XS_Bio__SCF_get_from_header’:
SCF.xs:159:18: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
Scf *scf_data = (Scf *)scf_pointer;
^
SCF.xs: In function ‘XS_Bio__SCF_get_at’:
SCF.xs:186:18: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
Scf *scf_data = (Scf *)scf_pointer;
^
SCF.xs: In function ‘XS_Bio__SCF_set_base_at’:
SCF.xs:242:18: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
Scf *scf_data = (Scf *)scf_pointer;
^
SCF.xs: In function ‘XS_Bio__SCF_set_at’:
SCF.xs:255:18: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
Scf *scf_data = (Scf *)scf_pointer;
^
rm -f blib/arch/auto/Bio/SCF/SCF.so
x86_64-linux-gnu-gcc -shared -L/usr/local/lib -fstack-protector-strong SCF.o -o blib/arch/auto/Bio/SCF/SCF.so \
-lread -lz \

/usr/local/lib/libread.a(open_trace_file.o): In function `find_file_url':
open_trace_file.c:(.text+0xaf4): warning: the use of `tempnam' is dangerous, better use `mkstemp'
chmod 755 blib/arch/auto/Bio/SCF/SCF.so
"/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- SCF.bs blib/arch/auto/Bio/SCF/SCF.bs 644
Manifying 1 pod document

How to sequence the human genome - Mark J. Kiel

Fri, 30 May 2014 13:24:11 -0500

View full lesson: http://ed.ted.com/lessons/how-to-sequence-the-human-genome-mark-j-kiel Your genome, every human's genome, consists of a unique DNA sequence of A's, T's, C's and G's that tell your cells how to operate. Thanks to technological advances, scientists are now able to know the sequence of letters that makes up an individual genome relatively quickly and inexpensively. Mark J. Kiel takes an in-depth look at the science behind the sequence. Lesson by Mark J. Kiel, animation by Marc Christoforidis.

Genomics and Personalized Medicine

Sun, 01 Jun 2014 23:38:42 -0500

(October 20, 2009) Michael Snyder, Professor of Genetics and Chair of the Department of Genetics at Stanford, discusses advances in gene sequencing, the impact of genomics on medicine, the potential for personalized medicine. and efforts at Stanford to further study these issues. Stanford Mini Med School is a series arranged and directed by Stanford's School of Medicine, and presented by the Stanford Continuing Studies program. Featuring more than thirty distinguished, faculty, scientists and physicians from Stanford's medical school, the series offers students a dynamic introduction to the world of human biology, health and disease, and the groundbreaking changes taking place in medical research and health care. Stanford University http://www.stanford.edu Stanford University School of Medicine http://med.stanford.edu Stanford Continuing Studies http://continuingstudies.stanford.edu Stanford University Channel on YouTube: http://www.youtube.com/stanford

Adhoc Bioinformatics Faculty Position @ NIT

Tue, 03 Jun 2014 16:19:52 -0500

NATIONAL INSTITUTE OF TECHNOLOGY, DEPARTMENT OF BIOTECHNOLOGY, WARANGAL – 506 021, Andhra Pradesh

No.NITW/BT/2014/adhoc

APPLICATIONS ARE INVITED FOR THE APPOINTMENT OF ADHOC FACULTY ON CONTRACT BASIS IN THE DEAPARTMENT OF BIOTECHNOLOGY

Period of Contract: Initially the appointment is for one semester i.e., from July 2014 up to December 2014 only.

Essential Qualifications:

i) B. Tech or equivalent in Biotechnology/ Industrial Biotechnology/ Biochemical Engineering / Chemical Engg. Or M. Sc in Microbiology/ Botany/ Zoology/ Biochemistry/Biotechnology and ii) M. Tech or equivalent in Biotechnology/Industrial Biotechnology/Bioinformatics

Integrated M. Tech in Biotechnology/Industrial Biotechnology/ Bioinformatics

Candidates must possess First class (60% aggregate marks or 6.5 CGPA) at B. Tech/ M. Sc and M. Tech.

Desirable: Ph. D Pay Package: All selected candidates shall be eligible for a consolidated pay of Rs.30, 000/- per month. Candidates with Ph. D shall be eligible for an additional amount of Rs.5, 000/- per month.

How to apply : Applications on plain paper with attested photocopies of certificate and bio data along with justification for eligibility should reach to the Head, Department of Biotechnology, National Institute of Technology, Warangal AP 506004 in the form of soft or hard copy on or before 21st June 2014 email : biotech_hod@nitw.ac.in

Intimation: No separate call letters will be sent to the candidates. All the eligible candidates will be notified in the institute web site on 23rd June 2014. All the eligible candidates are requested to report for the interview to the Head, Department of Biotechnology at 9:00 AM on 27th June 2014

Joining: Selected candidates will be informed and they are expected to join immediately.

http://www.nitw.ac.in/nitw/announcements/2014/Bio-Adhoc%20Advt.%20May-2014.pdf

Search Shell Command History

Rahul Nayak — Thu, 12 Jun 2014 17:43:34 -0500

We use couple of hundreads of command in daily basis. Most of them are actually repeated several time. The question remain open how do I search old command history under bash shell and modify or reuse it?

Now a days almost all modern shell allows you to search command history if enabled by user. Use history command to display the history list with line numbers. Lines listed with with a * have been modified by user.

Shell history search command

Type history at a shell prompt:
$ history

It will display the list of all used commandline history with an serial number.

To search particular command, enter:
$ history | grep command-name
$ history | egrep -i 'scp|ssh|ftp'
Emacs Line-Edit Mode Command History Searching

To get previous command containing string, hit [CTRL]+[r] followed by search string:

(reverse-i-search):

To get previous command, hit [CTRL]+[p]. You can also use up arrow key.

CTRL-p

To get next command, hit [CTRL]+[n]. You can also use down arrow key.

CTRL-n

fc command

Apart from hostory command there are fc command to extract the command from history. The fc stands for either "find command" or "fix command.

For example list last 10 command, enter:
$ fc -l 10
To list commands 130 through 150, enter:
$ fc -l 130 150
To list all commands since the last command beginning with ssh, enter:
$ fc -l ssh
You can edit commands 1 through 5 using vi text editor, enter:
$ fc -e vi 1 5

Delete command history

The -c option causes the history list to be cleared by deleting all of the entries:
$ history -c

Bioinformatician’s Pocket Reference !!

RAJESH DETROJA — Sun, 08 Jun 2014 09:56:58 -0500

It is amusing how brain of bioinformaticians work! Learning a new programming language for days feels so much of fun that making 5 minute discussion with neighbours (unless under special circumstances!) in our own mother-tongue. Today every bioinformatician keeps more than few languages and core IT toolkits on their plate. It has become mandatory to be able to mould different code snippets to build our own custom workflows, and thus keeping syntax at our fingertips has become essential.Although Google is best way to get syntax problem solved, it is not a bad idea to keep reference sheets is our smartphones or stick out some printed sheets on the back of your door, in the old fashion way!!

Address of the bookmark: http://infoplatter.wordpress.com/2014/04/06/bioinformaticians-pocket-reference/

Assistant Professor in Medical Bioinformatics

Tue, 24 Jun 2014 01:46:36 -0500

Advt. No : ME-I/A-IV/03/14
No.of Posts:01 (SC)
Pay Scale:
Pay Band of Rs.15600-39100 + Rs.6000/- GP +NPA @ 25% of Basic Pay +Learning Resource Allowance @ Rs.20,000/-P.A.+ Conveyance Allowance @ Rs. 1650/-P.M.+ Academic Allowance @ Rs.2500/- P.M. and other admissible allowances.
Qualifications:
Area of Specialization:-
Bioinformatics/Computational/Biology/Genomics/ Proteomics/ Structural Biology
1. Postgraduate qualification, e.g. Master’s Degree in Biotechnology/Bioinformatics/ Biophysics.
2. A Doctorate Degree of recognized University/Institute in a basic or allied Medical Science subject e.g. Medical Biotechnology/Biophysics. Bioinformatics/X-ray Crystallography/
Immunology/Structural Biology etc
Experience:
1.Minimum three years teaching and/or research experience in a recognized medical/research Institution in an allied medical subject after obtaining doctorate degree and preferably in Medical
Molecular Biology/ Biophysics/Structural Biology/Genomics and Clinical Proteomics/Computational Biology.
2. Minimum two publication with atleast one in international journal and atleast one as first author
Desirable:-
Consistently excellent scholastic/academic record, demonstrated ability to write grant proposal/(s) successfully, Post Doctoral training in a frontier area of medical Bioinformatics Research and of direct relevance to clinical diagnosis or patient care (preferably from a recognized top-ranking medical institution abroad)
Send your applications to O/O, Deputy Registrar, Recruitment & Establishment Cell, University of Health Sciences, Rohtak by 08.7.2014
For more details,please visit website: http://pgimsrohtak.nic.in/2014%20AP%20Advt.pdf
Last Apply Date: 08 Jul 2014

VCFtools: perform common tasks with VCF files such as file validation, file merging, intersecting, complements

Rahul Nayak — Tue, 07 Aug 2018 10:01:46 -0500

VCFtools contains a Perl API (Vcf.pm) and a number of Perl scripts that can be used to perform common tasks with VCF files such as file validation, file merging, intersecting, complements, etc. The Perl tools support all versions of the VCF specification (3.2, 3.3, 4.0, 4.1 and 4.2), nevertheless, the users are encouraged to use the latest versions VCFv4.1 or VCFv4.2. The VCFtools in general have been used mainly with diploid data, but the Perl tools aim to support polyploid data as well. Run any of the Perl scripts with the --help switch to obtain more help.

Many of the Perl scripts require that the VCF files are compressed by bgzip and indexed by tabix (both tools are part of the tabix package, available for download here). The VCF files can be compressed and indexed using the following commands

bgzip my_file.vcf
tabix -p vcf my_file.vcf.gz

http://vcftools.sourceforge.net/perl_module.html

Address of the bookmark: http://vcftools.sourceforge.net/perl_module.html

Postdoc position at Centre Méditerranéen de Médecine Moléculaire

Sun, 06 Jul 2014 11:23:06 -0500

The research group of Dr. Michele Trabucchi at the Centre Méditerranéen de Médecine Moléculaire (C3M) at INSERM U1065 (University of Nice Sophia-Antipolis, France) is seeking candidates for a Postdoctoral fellow position to start on October 2014 for 3 years funded by FRM (Fondation pour la Recherche Médicale).
The broad interest of the lab is in understanding the expression control and function of small RNAs in activated myeloid cells (visit our webpage to check research interests and publications of the group : http://www.unice.fr/c3m/EN/Equipe10.html ).

The work will focus on the functional studies of small RNAs by using next-generation sequencing approaches.

Candidates should hold a Ph.D. degree and have strong background in bioinformatics.
The University of Nice Sophia-Antipolis provides a wide range of facilities and training essential for biomedical research.
Interested applicants should send a PDF with a cover letter stating research interests and qualifications, an updated CV, a summary of previous research experience and contact information for two references to Michele Trabucchi ( mtrabucchi@unice.fr )