BOL: Related items

RACA: Reference-Assisted Chromosome Assembly

Priya Singh — Wed, 06 Apr 2016 09:29:50 -0500

Rreference-Assisted Chromosome Assembly (RACA), an algorithm to reliably order and orient sequence scaffolds generated by NGS and assemblers into longer chromosomal fragments using comparative genome information and paired-end reads.

http://www.ncbi.nlm.nih.gov/pubmed/23307812

http://bioen-compbio.bioen.illinois.edu/RACA/

Address of the bookmark: http://bioen-compbio.bioen.illinois.edu/RACA/

DISCOVAR

Abhimanyu Singh — Mon, 18 Apr 2016 11:59:16 -0500

DISCOVAR is a new variant caller and DISCOVAR de novo a new genome assembler, both designed for state-of-the-art data. Their inputs are chosen to optimize quality while keeping costs low. Currently it takes as input Illumina reads of length 250 or longer — produced on MiSeq or HiSeq 2500 — and from a single PCR-free library. These data enable a level of completeness and continuity that was not previously possible.

DISCOVAR can call variants on a region by region basis, potentially tiling an entire large genome. DISCOVAR variant calling is under active development and transitioning to VCF.

DISCOVAR de novo can generate de novo assemblies for both large and small genomes. It currently does not call variants.

More at https://www.broadinstitute.org/software/discovar/blog/?page_id=14

Address of the bookmark: https://www.broadinstitute.org/software/discovar/blog/

ALE: a Generic Assembly Likelihood Evaluation Framework for Assessing the Accuracy of Genome and Metagenome Assemblies

Neel — Tue, 26 Apr 2016 03:38:43 -0500

Assembly Likelihood Evaluation (ALE) framework that overcomes these limitations, systematically evaluating the accuracy of an assembly in a reference-independent manner using rigorous statistical methods. This framework is comprehensive, and integrates read quality, mate pair orientation and insert length (for paired-end reads), sequencing coverage, read alignment and k-mer frequency. ALE pinpoints synthetic errors in both single and metagenomic assemblies, including single-base errors, insertions/deletions, genome rearrangements and chimeric assemblies presented in metagenomes. At the genome level with real-world data, ALE identifies three large misassemblies from the Spirochaeta smaragdinae finished genome, which were all independently validated by Pacific Biosciences sequencing. At the single-base level with Illumina data, ALE recovers 215 of 222 (97%) single nucleotide variants in a training set from a GC-rich Rhodobacter sphaeroides genome. Using real Pacific Biosciences data, ALE identifies 12 of 12 synthetic errors in a Lambda Phage genome, surpassing even Pacific Biosciences' own variant caller, EviCons. In summary, the ALE framework provides a comprehensive, reference-independent and statistically rigorous measure of single genome and metagenome assembly accuracy, which can be used to identify misassemblies or to optimize the assembly process.

More at http://www.ncbi.nlm.nih.gov/pubmed/23303509

Address of the bookmark: http://sc932.github.io/ALE/about.html

MEDEA: Comparative Genomic Visualization with Adobe Flash

Jit — Tue, 26 Apr 2016 12:15:16 -0500

As the number of sequence and annotated genomes grows larger, the need to understand, compare, and contrast the data becomes increasingly important. Using the power of the human visual system to detect trends and spot outliers is necessary in such large and complex data sets.

More at http://www.broadinstitute.org/annotation/medea/

Address of the bookmark: http://www.broadinstitute.org/annotation/medea/

YASS :: genomic similarity search tool

Jit — Mon, 02 May 2016 09:26:00 -0500

YASS is a genomic similarity search tool, for nucleic (DNA/RNA) sequences in fasta or plain text format (it produces local pairwise alignments). Like most of the heuristic pairwise local alignment tools for DNA sequences (FASTA, BLAST, PATTERNHUNTER, BLASTZ/LASTZ, LAST ...), YASS uses seeds to detect potential similarity regions, and then tries to extend them to local alignments. This genomic search tool uses multiple transition constrained spaced seeds that enable to search more fuzzy repeats, as non-coding DNA/RNA. Another simple, but interesting feature is that you can specify the seed pattern used in the search step (as provided for example by iedera).

Main features of YASS are:

multiple, possibly overlapping seeds and a new hit criterion to ensure a good sensitivity/selectivity trade-off
transition-constrained spaced seeds to improve sensitivity (transition mutations are purine to purine [A<->G] or pyrimidine to pyrimidine [C<->T])
using different scoring schemes with bit-score and E-value evaluated according to the sequence background frequencies
parameterizable output filter for low complexity repeats
reporting of various alignment statistical parameters (mutation bias along triplets, transition/transversion)
post-processing step to group gapped alignments

Address of the bookmark: http://bioinfo.lifl.fr/yass/

Andi

Jit — Fri, 13 May 2016 05:16:35 -0500

This is the andi program for estimating the evolutionary distance between closely related genomes. These distances can be used to rapidly infer phylogenies for big sets of genomes. Because andi does not compute full alignments, it is so efficient that it scales even up to thousands of bacterial genomes.

This readme covers all necessary instructions for the impatient to get andi up and running. For extensive instructions please consult the manual.

More at https://github.com/evolbioinf/andi/

Address of the bookmark: http://bioinformatics.oxfordjournals.org/content/early/2015/01/13/bioinformatics.btu815.full

karyoploteR: plot whole genomes with arbitrary data

Abhimanyu Singh — Fri, 02 Feb 2018 03:24:28 -0600

karyoploteR is an R package to create karyoplots, that is, representations of whole genomes with arbitrary data plotted on them. It is inspired by the R base graphics system and does not depend on other graphics packages. The aim of karyoploteR is to offer the user an easy way to plot data along the genome to get broad genome-wide view to facilitate the identification of genome wide relations and distributions.

Address of the bookmark: https://bernatgel.github.io/karyoploter_tutorial/

Blobology

Jit — Mon, 13 Jun 2016 10:18:33 -0500

Tools for making blobplots or Taxon-Annotated-GC-Coverage plots (TAGC plots) to visualise the contents of genome assembly data sets as a QC step

Blaxter Lab, Institute of Evolutionary Biology, University of Edinburgh

Goal: To create blobplots or Taxon-Annotated-GC-Coverage plots (TAGC plots) to visualise the contents of genome assembly data sets as a QC step.

This repository accompanies the paper:
Blobology: exploring raw genome data for contaminants, symbionts and parasites using taxon-annotated GC-coverage plots. Sujai Kumar, Martin Jones, Georgios Koutsovoulos, Michael Clarke, Mark Blaxter
(submitted 2013-10-01 to Frontiers in Bioinformatics and Computational Biology special issue : Quality assessment and control of high-throughput sequencing data).

It contains bash/perl/R scripts for running the analysis presented in the paper to create a preliminary assembly, and to create and collate GC content, read coverage and taxon annotation for the preliminary assembly, which can be visualised, such as Figure 2a from the paper showing TAGC plots/blobplots for Caenorhabditis sp. 5:

Address of the bookmark: https://github.com/blaxterlab/blobology

Linux command line exercises for NGS data processing

Jit — Wed, 22 Jun 2016 07:59:39 -0500

The purpose of this tutorial is to introduce students to the frequently used tools for NGS analysis as well as giving experience in writing one-liners. Copy the required files to your current directory, change directory (cd) to the linuxTutorial folder, and do all the processing inside:

[uzi@quince-srv2 ~/]$ cp -r /home/opt/MScBioinformatics/linuxTutorial .
[uzi@quince-srv2 ~/]$ cd linuxTutorial
[uzi@quince-srv2 ~/linuxTutorial]$

I have deliberately chosen Awk in the exercises as it is a language in itself and is used more often to manipulate NGS data as compared to the other command line tools such as grep, sed, perl etc. Furthermore, having a command on awk will make it easier to understand advanced tutorials such as Illumina Amplicons Processing Workflow.

In Linux, we use a shell that is a program that takes your commands from the keyboard and gives them to the operating system. Most Linux systems utilize Bourne Again SHell (bash), but there are several additional shell programs on a typical Linux system such as ksh, tcsh, and zsh. To see which shell you are using, type

[uzi@quince-srv2 ~/linuxTutorial]$ echo $SHELL

/bin/bash

Address of the bookmark: http://userweb.eng.gla.ac.uk/umer.ijaz/bioinformatics/linux.html

A5-miseq

Jit — Thu, 18 Aug 2016 04:05:23 -0500

_A5-miseq_ is a pipeline for assembling DNA sequence data generated on the Illumina sequencing platform. This README will take you through the steps necessary for running _A5-miseq_.

Point to note:

There are many situations where A5-miseq is not the right tool for the job. In order to produce accurate results, A5-miseq requires Illumina data with certain characteristics. A5-miseq will likely not work well with Illumina reads shorter than around 80nt, or reads where the base qualities are low in all or most reads before 60nt. A5-miseq assumes it is assembling homozygous haploid genomes. Use a different assembler for metagenomes and heterozygous diploid or polyploid organisms. Use a different assembler if a tool like FastQC reports your data quality is dubious. You have been warned! Datasets consisting solely of unpaired reads are not currently supported.

Address of the bookmark: https://sourceforge.net/projects/ngopt/