BOL: Related items

EXCAVATOR: detecting copy number variants from whole-exome sequencing data

Radha Agarkar — Fri, 04 Jan 2019 10:10:48 -0600

EXCAVATOR, for the detection of copy number variants (CNVs) from whole-exome sequencing data. EXCAVATOR combines a three-step normalization procedure with a novel heterogeneous hidden Markov model algorithm and a calling method that classifies genomic regions into five copy number states. We validate EXCAVATOR on three datasets and compare the results with three other methods. These analyses show that EXCAVATOR outperforms the other methods and is therefore a valuable tool for the investigation of CNVs in largescale projects, as well as in clinical research and diagnostics. EXCAVATOR is freely available at http://sourceforge.net/projects/excavatortool/.

EXCAVATOR is a novel software package for the detection of copy number variants (CNVs) from whole-exome sequencing data.
EXCAVATOR has been published on Genome Biology (http://genomebiology.com/2013/14/10/R120/abstract).

Address of the bookmark: https://sourceforge.net/projects/excavatortool/

nQuire: A statistical framework for ploidy estimation using NGS short-read data

Jit — Thu, 31 Jan 2019 05:12:19 -0600

nQuire implements a set of commands to estimate ploidy level of individuals from species, where recent polyploidization occurred and intraspecific ploidy variation is observed. Specifically, nQuire uses next-generation sequencing data to distinguish between diploids, triploids and tetraploids, on the basis of frequency distributions at variant sites where only two bases are segregating.

For more background see also the publication at BMC Bioinformatics.

https://github.com/clwgg/nQuire

Address of the bookmark: https://github.com/clwgg/nQuire

Trelliscope: flexibly visualize large, complex data in great detail from within the R statistical programming environment.

Jit — Tue, 21 Jan 2020 04:22:49 -0600

Trelliscope provides a way to flexibly visualize large, complex data in great detail from within the R statistical programming environment. Trelliscope is a component in the DeltaRho environment.

For those familiar with Trellis Display, faceting in ggplot, or the notion of small multiples, Trelliscope provides a scalable way to break a set of data into pieces, apply a plot method to each piece, and then arrange those plots in a grid and interactively sort, filter, and query panels of the display based on metrics of interest. With Trelliscope, we are able to create multipanel displays on data with a very large number of subsets and view them in an interactive and meaningful way.

Address of the bookmark: http://deltarho.org/docs-trelliscope/#introduction

LoFreq*: A sequence-quality aware, ultra-sensitive variant caller for NGS data

BioStar — Tue, 18 Feb 2020 03:24:22 -0600

LoFreq* (i.e. LoFreq version 2) is a fast and sensitive variant-caller for inferring SNVs and indels from next-generation sequencing data. It makes full use of base-call qualities and other sources of errors inherent in sequencing (e.g. mapping or base/indel alignment uncertainty), which are usually ignored by other methods or only used for filtering.

https://github.com/CSB5/lofreq

http://csb5.github.io/lofreq/installation/

https://github.com/CSB5/lofreq/tree/master/dist

Address of the bookmark: http://csb5.github.io/lofreq/

Submit your SARS-CoV-2 sequence data to GenBank

Neel — Thu, 09 Apr 2020 18:28:25 -0500

Submit your SARS-CoV-2 sequence data to GenBank and SRA with our new submission landing page. Submission is simple and streamlined *and* there’s a rapid turnaround. https://submit.ncbi.nlm.nih.gov/sarscov2/

Quickly and easily add your SARS-CoV-2 sequence data to the growing public archive with new, special features and support from NCBI. new SARS-CoV-2 sequence submission landing page will help you get started. GenBank submissions are accessioned and released in approximately 1-2 working days, and Sequence Read Archive (SRA) submissions typically processed and released within hours. Submission is simple!

More information is available on NCBI Insights. https://ncbiinsights.ncbi.nlm.nih.gov/2020/04/09/sars-cov2-data-streamlined-submission-rapid-turnaround/

Breaking chromosomes to study cancer !!!

Jit — Fri, 18 Jul 2014 05:42:09 -0500

Chromosomes are present in every cell of our body and they contain the information the body needs to develop and function properly. This information is carried in genes that are arranged along the chromosomes. There are usually 46 chromosomes in every cell. These chromosomes come in pairs, one from our mother and one from our father. The chromosomes can be sorted into 23 pairs by looking at them down a microscope.

Most people who have a balanced translocation have the right amount of chromosome material but it has been rearranged in some way. This may happen if two chromosomes swap pieces (a reciprocal translocation). In other cases two whole chromosomes may become stuck together (a Robertsonian translocation). This page describes what happens when someone has a reciprocal translocation.

Reciprocal chromosomal translocations occur following double-strand breaks (DSBs) in DNA when a section of one chromosome is exchanged with that of another, non-homologous chromosome. These exchanges may produce a dysfunctional fusion gene that disrupts cell growth and survival pathways, such as the translocations seen in leukemia and childhood sarcomas.

Chromosomal translocations have been well studied in cancer cell lines which are associated with two types of cancer, acute myeloid leukemia and Ewing's sarcoma, but determining how they contribute to cancer development is complicated by additional mutations and altered gene expression profiles in these cultured cells. Now, Juan Carlos Ramirez, head of the Viral Vector Facility at the Fundacion Centro Nacional de Investigaciones Cardiovasculares (CNIC) and his colleagues Raul Torres at CNIC and Sandra Rodriguez-Peralez at the Spanish National Cancer Center (CNIO) in Madrid, Spain have used a new genome editing tool, CRISPR-Cas9, to induce chromosomal translocations for the first time in a human cell line and in primary cells. The study's authors conclude by stating that the use of this technology will allow for the clarification of how and why chromosomal translocation occurs, which without doubt will allow new anti-cancer therapeutic strategies to be tackled.

Using RNA-Guided Endonuclease (RGEN) technology or CRISPR/Cas9 genome engineering technology, CNIO and CNIC researchers have shown that it is possible to obtain such chromosomal translocations. The CRISPR-Cas9 system is extremely simple to introduce a cut at the desired locus, easier to design, and cheaper than many other systems. Using the CRISPR-Cas9 system, Ramirez and his colleagues reproduced the translocations observed in Ewing’s Sarcoma (ES) and Acute Myeloid Leukemia (AML) patient cell lines in HEK293 cells and also generated the ES translocation in human mesenchymal stem cells and the AML translocation in umbilical cord blood cells.

By focusing on chromosomal translocation without the confounding characteristics of established cell lines, these new cells lines should help answer the fundamental question of what causes a cell to become cancerous. Ramirez and his team now look forward to modeling other chromosome translocations in a variety of cell types.

Reference:

http://en.wikipedia.org/wiki/Chromosomal_translocation

http://www.nature.com/ncomms/2014/140603/ncomms4964/abs/ncomms4964.html

McClintock: Meta-pipeline to identify transposable element insertions using next generation sequencing data

BioStar — Tue, 27 Oct 2020 00:21:18 -0500

an integrated bioinformatics pipeline for the detection of TE insertions in whole-genome shotgun data, called McClintock (https://github.com/bergmanlab/mcclintock), which automatically runs and standardizes output for multiple TE detection methods. We demonstrate the utility of McClintock by evaluating six TE detection methods using simulated and real genome data from the model microbial eukaryote, Saccharomyces cerevisiae.

Address of the bookmark: https://github.com/bergmanlab/mcclintock

GraphUnzip: Phases an assembly graph using Hi-C data and/or long reads.

Jit — Fri, 05 Feb 2021 21:22:24 -0600

GraphUnzip, a fast, memory-efficient and accurate tool to unzip assembly graphs into their constituent haplotypes using long reads and/or Hi-C data. As GraphUnzip only connects sequences in the assembly graph that already had a potential link based on overlaps, it yields high-quality gap-less supercontigs. To demonstrate the efficiency of GraphUnzip, we tested it on a simulated diploid Escherichia coli genome, and on two real datasets for the genomes of the rotifer Adineta vaga and the potato Solanum tuberosum. In all cases, GraphUnzip yielded highly continuous phased assemblies.

https://www.biorxiv.org/content/biorxiv/early/2021/02/01/2021.01.29.428779.full.pdf

Address of the bookmark: https://github.com/nadegeguiglielmoni/GraphUnzip

Corona Virus Genome and Data Download !

Abhi — Sun, 12 Dec 2021 23:34:54 -0600

Genes and its related metadata could be found on https://www.ncbi.nlm.nih.gov/datasets/coronavirus/genomes/

Address of the bookmark: https://www.ncbi.nlm.nih.gov/datasets/coronavirus/genomes/

Orange: Data mining

BioStar — Mon, 13 Mar 2023 12:42:29 -0500

Open source machine learning and data visualization.

Build data analysis workflows visually, with a large, diverse toolbox.

Address of the bookmark: https://orangedatamining.com/