mScaffolder scaffolds a genome using an existing high quality genome as the reference. It aligns the two genomes using nucmer utility from MUMmer and then orders and orients the contigs of the candidate genome guided by their alignments to the reference genome. Please send your questions and comments to mchakrab@uci.edu.

Citation https://www.nature.com/articles/s41588-017-0010-y

Address of the bookmark: https://github.com/mahulchak/mscaffolder

Once a query gene has been entered, it is displayed in its genomic context in parallel to the genomic context of all its orthologous and paralogous copies in all the other sequenced metazoan genomes. Moreover, Genomicus stores and displays the predicted ancestral genome structure in all the ancestral species within the phylogenetic range of interest.

All the data on extant species displayed in this browser are from Ensembl.

Summary statistics of Genomicus version 105.01: (view species tree in pdf or newick)

Address of the bookmark: https://www.genomicus.bio.ens.psl.eu/genomicus-105.01/cgi-bin/search.pl

ABySS Explorer

Interactive Java application that uses a novel graph-based representation to display a sequence assembly and associated metadata

http://www.bcgsc.ca/platform/bioinfo/software/abyss-explorer

BamView

Genome browser and annotation tool that allows visualization of sequence features, next-generation sequencing (NGS) data and the results of analyses within the context of the sequence, and also its six-frame translation

http://www.sanger.ac.uk/resources/software/artemis/

DNannotator 

Annotation web toolkit for regional genomic sequences

http://bioapp.psych.uic.edu/DNannotator.htm

JVM 

Java Visual Mapping tool for NGS reads

http://www.springer.com/cda/content/document/cda_downloaddocument/9789401792448-c2.pdf?SGWID=0-0-45-1487072-p176815501

LookSeq 

Web-based visualization of sequences derived from multiple sequencing technologies. Low- or high-depth read pileups and easy visualization of putative single nucleotide and structural variation

http://lookseq.sourceforge.net

MagicViewer 

Visualization of short read alignment, identification of genetic variation and association with annotation information of a reference genome

http://bioinformatics.zj.cn/magicviewer/

MapView 

Alignments of huge-scale single-end and pair-end short reads

http://omictools.com/mapview-s1367.html

MultiPipMaker

Computes alignments of similar regions in two DNA sequences. The resulting alignments are summarized with a ‘percent identity plot’ (pip)

http://pipmaker.bx.psu.edu/pipmaker/

PileLineGUI 

Handling genome position files in NGS studies

http://sing.ei.uvigo.es/pileline/pilelinegui.html

SAMtools tview 

Simple and fast text alignment viewer; NGS compatible

http://www.htslib.org/

SEWAL

Uses a locality-sensitive hashing algorithm to enumerate all unique sequences in an entire Illumina sequencing run

http://www.sourceforge.net/projects/sewal

STAR 

A web-based integrated solution to management and visualization of sequencing data

http://wanglab.ucsd.edu/star/browser

SVA 

Software for annotating and visualizing sequenced human genomes

http://www.svaproject.org

Viewer (IGV) 

Visualization of large heterogeneous datasets, providing a smooth and intuitive user experience at all levels of genome resolution

https://www.broadinstitute.org/igv/

ZOOM Lite 

NGS data mapping and visualization software

http://bioinfor.com/zoom/lite/

• Handle big sequence data, e.g:
  • Compare two vertebrate genomes
  • Align billions of DNA reads to a genome
• Indicate the reliability of each aligned column.
• Use sequence quality data properly.
• Compare DNA to proteins, with frameshifts.
• Compare PSSMs to sequences
• Calculate the likelihood of chance similarities between random sequences.
• Do split and spliced alignment.
• Train alignment parameters for unusual kinds of sequence (e.g. nanopore).

Address of the bookmark: http://last.cbrc.jp/

• paired-end (PE) and/or mate-pair libraries (NGS-based mode)
• long reads (NGS-based mode)
• synteny to the genome of some related species (reference-based mode)

Scaffolding 

In reference-based mode, pyScaf uses synteny to the genome of closely related species in order to order contigs and estimate distances between adjacent contigs.

Contigs are aligned globally (end-to-end) onto reference chromosomes, ignoring:

• matches not satisfying cut-offs (--identity and --overlap)
• suboptimal matches (only best match of each query to reference is kept)
• and removing overlapping matches on reference.

In preliminary tests, pyScaf performed superbly on simulated heterozygous genomes based on C. parapsilosis (13 Mb; CANPA) and A. thaliana (119 Mb; ARATH) chromosomes, reconstructing correctly all chromosomes always for CANPA and nearly always for ARATH (Figures in dropbox, CANPA table, ARATH table).
Runs took ~0.5 min for CANPA on 4 CPUs and ~2 min for ARATH on 16 CPUs.

Important remarks:

• Reduce your assembly before (fasta2homozygous.py) as any redundancy will likely break the synteny.
• pyScaf works better with contigs than scaffolds, as scaffolds are often affected by mis-assemblies (no de novo assembler / scaffolder is perfect...), which breaks synteny.
• pyScaf works very well if divergence between reference genome and assembled contigs is below 20% at nucleotide level.
• pyScaf deals with large rearrangements ie. deletions, insertion, inversions, translocations. Note however, this is experimental implementation!
• Consider closing gaps after scaffolding.

Address of the bookmark: https://github.com/lpryszcz/pyScaf

Address of the bookmark: http://www.bcgsc.ca/platform/bioinfo/software/sockeye/releases/1.3

With Single Molecule, Real-Time (SMRT) Sequencing, you can access structural variations having a broad range of sizes, types, and GC content with the ability to:

• Uncover missing heritability linked to structural variation
• Unambiguously identify genomic context and variant breakpoints at the sequence level to unravel the genetic etiology of disease
• Resolve structural variation across the complete size spectrum with basepair resolution

Following are the SV tools, which can assist you to achieve your goal.

Sniffles: Structural variation caller using third generation sequencing

Sniffles is a structural variation caller using third generation sequencing (PacBio or Oxford Nanopore). It detects all types of SVs using evidence from split-read alignments, high-mismatch regions, and coverage analysis. Please note the current version of Sniffles requires sorted output from BWA-MEM (use -M and -x parameter) or NGM-LR with the optional SAM attributes enabled! 

More at https://github.com/fritzsedlazeck/Sniffles

MultiBreak-SV: It identifies structural variants from next-generation paired end data, third-generation long read data, or data from a combination of sequencing platforms.

There are two pieces of software in this release: (1) a pre-processor that takes machineformat (.m5) BLASR files, and (2) MultiBreak-SV. For installation and usage instructions, see doc/MultiBreakSV-Manual.txt.

More at https://github.com/raphael-group/multibreak-sv

Parliament: A Structural Variation Tool. Why ask a single sv-detection approach to find every variant when you can have a parliament of tools deciding?

Publication about the algorithm and “…the first long-read characterization of structural variation in a diploid human personal genome…” (HS1011) - “Assessing structural variation in a personal genome—towards a human reference diploid genome”

More at https://sourceforge.net/projects/parliamentsv/

https://www.dnanexus.com/papers/Parliament_Info_Sheet.pdf

PBHoney: the structural variation discovery tool 

PBHoney is an implementation of two variant-identification approaches designed to exploit the high mappability of long reads (i.e., greater than 10,000 bp). PBHoney considers both intra-read discordance and soft-clipped tails of long reads to identify structural variants.

Read The Paper http://www.biomedcentral.com/1471-2105/15/180/abstract

More at https://sourceforge.net/projects/pb-jelly/

SMRT-SV: Structural variant and indel caller for PacBio reads

Structural variant (SV) and indel caller for PacBio reads based on methods from Chaisson et al. 2014.

SMRT-SV provides an official software package for tools described in Chaisson et al. 2014 and adds several key features including the following.

• Unified variant calling user interface with built-in cluster compute support
• Small indel calling (2-49 bp)
• Improved inversion calling (screenInversions)
• Quality metric for SV calls based on number of local assemblies supporting each call
• Higher sensitivity for SV calls using tiled local assemblies across the entire genome instead of "signature" regions
• Genotyping of SVs with Illumina paired-end reads from WGS samples

More at https://github.com/EichlerLab/pacbio_variant_caller

Address of the bookmark: https://www.baseclear.com/genomics/bioinformatics/basetools/SSPACE

Further information about fragScaff, including source code, is available at:https://sourceforge.net/projects/fragscaff/files.

Manuscript describing fragScaff was published as: Adey A, Kitzman JO, Burton JN, Daza R, Kumar A, Christiansen L, Ronaghi M, Amini S, L Gunderson K, Steemers FJ, Shendure J#. In vitro, long-range sequence information for de novo genome assembly via transposase contiguity. Genome Research 2014 Dec;24(12):2041-9. doi: 10.1101/gr.178319.114. PubMed PMID: 25327137.

Address of the bookmark: https://sourceforge.net/projects/fragscaff/files/