BOL: Related items

BIMA V3: an aligner customized for mate pair library sequencing

Abhimanyu Singh — Wed, 14 Dec 2016 15:20:00 -0600

Summary: Mate pair library sequencing is an effective and economical method for detecting genomic structural variants and chromosomal abnormalities. Unfortunately, the mapping and alignment of mate pair read pairs to a reference genome is a challenging and
time consuming process for most NGS alignment programs. Large insert sizes, introduction of library preparation protocol artifacts (biotin junction reads, paired-end read contamination, chimeras, etc.), and presence of structural variant breakpoints within reads increases mapping and alignment complexity. We describe an algorithm that is up to 20 times faster and 25% more accurate than popular NGS alignment programs when processing mate pair sequencing.
Availability: http://bioinformaticstools.mayo.edu/research/bima/
Contact: vasmatzis.george@mayo.edu

Address of the bookmark: http://bioinformatics.oxfordjournals.org/content/early/2014/02/12/bioinformatics.btu078.full.pdf

Bioinformatics tools for genome assembly !

BioStar — Mon, 24 Jul 2023 07:04:26 -0500

There are numerous genome assembly tools available, each with its strengths and weaknesses. Here is a list of some widely used genome assembly tools as of my last update in September 2021:

SPAdes: An assembler specifically designed for single-cell and multi-cell bacterial genomes, as well as small eukaryotic genomes.
ABySS: A parallelized assembler for large genomes that uses de Bruijn graphs.
Velvet: Another de Bruijn graph-based assembler optimized for short-read sequencing data.
SOAPdenovo: A de Bruijn graph-based assembler designed for short reads, widely used for assembling large and complex genomes.
MaSuRCA: A hybrid assembler that combines data from multiple sequencing technologies, such as Illumina and PacBio.
Canu: A long-read assembler optimized for PacBio and Oxford Nanopore sequencing data.
Flye: A long-read assembler suitable for bacterial and small eukaryotic genomes.
SMARTdenovo: An assembler designed for long reads, particularly suited for PacBio data.
SPAdes Long Read (SPAdesLR): An extension of SPAdes for long-read data, such as those from PacBio or Nanopore.
Minia: An assembler optimized for low memory consumption, suitable for small and medium-sized genomes.
Unicycler: A hybrid assembler that combines short and long reads for circular bacterial genome assembly.
wtdbg2: A de Bruijn graph assembler for long reads, efficient for very large genomes.
Shasta: A long-read assembler that uses the Overlap-Layout-Consensus approach, suitable for PacBio and Nanopore data.
Sparc: An assembler designed to handle noisy long reads from Nanopore sequencing.
CANA: An assembler for metagenomic data, particularly for complex and diverse microbial communities.
Ra Assembler: A metagenome assembler for long reads, designed for highly complex metagenomic samples.

Please note that the field of bioinformatics is constantly evolving, and new assembly tools may have emerged since my last update. Additionally, the performance of these tools can vary depending on the characteristics of the sequencing data and the genome being assembled. When selecting an assembly tool, consider the specific requirements of your project, the available data types, and the computational resources at your disposal. Always refer to the respective tool's documentation and publications for the most up-to-date information and recommendations.

pyScaf

Bulbul — Mon, 19 Dec 2016 14:20:33 -0600

pyScaf orders contigs from genome assemblies utilising several types of information:

paired-end (PE) and/or mate-pair libraries (NGS-based mode)
long reads (NGS-based mode)
synteny to the genome of some related species (reference-based mode)

Scaffolding

In reference-based mode, pyScaf uses synteny to the genome of closely related species in order to order contigs and estimate distances between adjacent contigs.

Contigs are aligned globally (end-to-end) onto reference chromosomes, ignoring:

matches not satisfying cut-offs (--identity and --overlap)
suboptimal matches (only best match of each query to reference is kept)
and removing overlapping matches on reference.

In preliminary tests, pyScaf performed superbly on simulated heterozygous genomes based on C. parapsilosis (13 Mb; CANPA) and A. thaliana (119 Mb; ARATH) chromosomes, reconstructing correctly all chromosomes always for CANPA and nearly always for ARATH (Figures in dropbox, CANPA table, ARATH table).
Runs took ~0.5 min for CANPA on 4 CPUs and ~2 min for ARATH on 16 CPUs.

Important remarks:

Reduce your assembly before (fasta2homozygous.py) as any redundancy will likely break the synteny.
pyScaf works better with contigs than scaffolds, as scaffolds are often affected by mis-assemblies (no de novo assembler / scaffolder is perfect...), which breaks synteny.
pyScaf works very well if divergence between reference genome and assembled contigs is below 20% at nucleotide level.
pyScaf deals with large rearrangements ie. deletions, insertion, inversions, translocations. Note however, this is experimental implementation!
Consider closing gaps after scaffolding.

Address of the bookmark: https://github.com/lpryszcz/pyScaf

The Genome 10K Project

Tue, 29 Jul 2014 09:11:04 -0500

https://genome10k.soe.ucsc.edu The Genome 10K project aims to assemble a genomic zoo—a collection of DNA sequences representing the genomes of 10,000 vertebrate species, approximately one for every vertebrate genus. The trajectory of cost reduction in DNA sequencing suggests that this project will be feasible within a few years. Capturing the genetic diversity of vertebrate species would create an unprecedented resource for the life sciences and for worldwide conservation efforts. The growing Genome 10K Community of Scientists (G10KCOS), made up of leading scientists representing major zoos, museums, research centers, and universities around the world, is dedicated to coordinating efforts in tissue specimen collection that will lay the groundwork for a large-scale sequencing and analysis project.

Picard

Neel — Fri, 29 Apr 2016 08:21:54 -0500

Picard is a set of command line tools for manipulating high-throughput sequencing (HTS) data and formats such as SAM/BAM/CRAM and VCF. These file formats are defined in the Hts-specs repository. See especially the SAM specification and the VCF specification.

Note that the information on this page is targeted at end-users. For developers, the source code, building instructions and implementation/development resources are available on GitHub.

The Picard toolkit is open-source under the MIT license and free for all uses.

Enjoy!

Address of the bookmark: http://broadinstitute.github.io/picard/

Sequence assembly with MIRA 4

Priya Singh — Wed, 06 Apr 2016 08:21:22 -0500

MIRA is a multi-pass DNA sequence data assembler/mapper for whole genome and EST/RNASeq projects. MIRA assembles/maps reads gained by

electrophoresis sequencing (aka Sanger sequencing)
454 pyro-sequencing (GS20, FLX or Titanium)
Ion Torrent
Solexa (Illumina) sequencing
(in development) Pacific Biosciences sequencing

into contiguous sequences (called contigs). One can use the sequences of different sequencing technologies either in a single assembly run (a true hybrid assembly) or by mapping one type of data to an assembly of other sequencing type (a semi-hybrid assembly (or mapping)) or by mapping a data against consensus sequences of other assemblies (a simple mapping).

The MIRA acronym stands for Mimicking Intelligent Read Assembly and the program pretty well does what its acronym says (well, most of the time anyway). It is the Swiss army knife of sequence assembly that I've used and developed during the past 14 years to get assembly jobs I work on done efficiently - and especially accurately. That is, without me actually putting too much manual work into it.

More at http://mira-assembler.sourceforge.net/docs/DefinitiveGuideToMIRA.html

Address of the bookmark: http://mira-assembler.sourceforge.net/docs/DefinitiveGuideToMIRA.html

Understanding Fastqc Output

Jit — Fri, 15 Apr 2016 05:47:40 -0500

Understanding Following table and graphs

Duplication level
kmer profile
per base GC content
per base N content
per base quality
per base sequence content
per sequence GC content
per sequence quality
sequence length distribution

More at http://www.bioinformatics.babraham.ac.uk/projects/fastqc/Help/3%20Analysis%20Modules/

Address of the bookmark: http://www.bioinformatics.babraham.ac.uk/projects/fastqc/Help/3%20Analysis%20Modules/

ALE: a Generic Assembly Likelihood Evaluation Framework for Assessing the Accuracy of Genome and Metagenome Assemblies

Neel — Tue, 26 Apr 2016 03:38:43 -0500

Assembly Likelihood Evaluation (ALE) framework that overcomes these limitations, systematically evaluating the accuracy of an assembly in a reference-independent manner using rigorous statistical methods. This framework is comprehensive, and integrates read quality, mate pair orientation and insert length (for paired-end reads), sequencing coverage, read alignment and k-mer frequency. ALE pinpoints synthetic errors in both single and metagenomic assemblies, including single-base errors, insertions/deletions, genome rearrangements and chimeric assemblies presented in metagenomes. At the genome level with real-world data, ALE identifies three large misassemblies from the Spirochaeta smaragdinae finished genome, which were all independently validated by Pacific Biosciences sequencing. At the single-base level with Illumina data, ALE recovers 215 of 222 (97%) single nucleotide variants in a training set from a GC-rich Rhodobacter sphaeroides genome. Using real Pacific Biosciences data, ALE identifies 12 of 12 synthetic errors in a Lambda Phage genome, surpassing even Pacific Biosciences' own variant caller, EviCons. In summary, the ALE framework provides a comprehensive, reference-independent and statistically rigorous measure of single genome and metagenome assembly accuracy, which can be used to identify misassemblies or to optimize the assembly process.

More at http://www.ncbi.nlm.nih.gov/pubmed/23303509

Address of the bookmark: http://sc932.github.io/ALE/about.html

sockeye

Jit — Fri, 17 Feb 2017 08:51:16 -0600

This sockeye software uses the Ensembl database project to import sequence and annotation information from several eukaryotic species. A user can additionally import their own custom sequence and annotation data. Individual annotation objects are displayed in Sockeye by using custom 3D models. Ensembl-derived and imported sequences can be analyzed by using a suite of multiple and pair-wise alignment algorithms. The results of these comparative analyses are also displayed in the 3D environment of Sockeye. By using the Java3D API to visualize genomic data in a 3D environment, we are able to compactly display cross-sequence comparisons. This provides the user with a novel platform for visualizing and comparing genomic feature organization.

Address of the bookmark: http://www.bcgsc.ca/platform/bioinfo/software/sockeye/releases/1.3

GAM-NGS: genomic assemblies merger for next generation sequencing

Jit — Mon, 19 Dec 2016 06:07:05 -0600

GAM-NGS (Genomic Assemblies Merger for Next Generation Sequencing), whose primary goal is to merge two or more assemblies in order to enhance contiguity and correctness of both. GAM-NGS does not rely on global alignment: regions of the two assemblies representing the same genomic locus (called blocks) are identified through reads' alignments and stored in a weightedgraph. The merging phase is carried out with the help of this weighted graph that allows an optimal resolution of local problematic regions.

Address of the bookmark: https://github.com/vice87/gam-ngs