BOL: Related items

Supernova: generates phased, whole-genome de novo assemblies from a Chromium-prepared library.

Jit — Sun, 31 May 2020 01:59:30 -0500

Supernova generates phased, whole-genome de novo assemblies from a Chromium-prepared library.

Please see Achieving Success with De Novo Assembly and System Requirements before creating your Chromium libraries for assembly.

Supernova should be run using 38-56x coverage of the genome.
• Somewhat higher coverage is sometimes advantageous.
• Supernova will exit if it finds that coverage is far from the recommended range.
• Note that at most 2.14 billion reads are allowed.
• Please note that we have not extensively tested genomes larger than human, and any genome above approximately 4 GB should be considered experimental and is not supported.

Address of the bookmark: https://support.10xgenomics.com/de-novo-assembly/software/pipelines/latest/using/running

Spines

Jit — Mon, 28 Nov 2016 05:33:26 -0600

Spines is a collection of software tools, developed and used by the Vertebrate Genome Biology Group at the Broad Institute. It provides basic data structures for efficient data manipulation (mostly genomic sequences, alignments, variation etc.), as well as specialized tool sets for various analyses. It also features three sequence alignment packages: Satsuma, a highly parallelized program for high-sensitivity, genome-wide synteny; Papaya, an all-purpose alignment tool for less diverged sequences; and SLAP, a context-sensitive local aligner for diverged sequences with large gaps.

Access Spines here.

Address of the bookmark: https://www.broadinstitute.org/genome-sequencing-and-analysis/spines

bipype

Jit — Thu, 01 Dec 2016 08:47:38 -0600

Bipype is a very useful program, which prepare a lot of types of bioinformatics analyses. There are three input options: amplicons, WGS (whole genome sequences) and metatranscriptomic data. If amplicons are input data, then bipype does reconstruction and pairs merging. After that biodiversity is searching. There are two types of searching depending on the amplicons types (ITS or 16S). If WGS are chosen, then bipype finds the SA coordinates of the input reads and generates alignments in the SAM format given single-end reads, aligns reads to reference sequence(s). All of these analyses will be shown with Krona program, which allows to show hierarchical data with pie charts.

Address of the bookmark: https://readthedocs.org/projects/bipype/

Spades tutorial PDF

Abhimanyu Singh — Tue, 01 Feb 2022 04:56:43 -0600

SPAdes—St. Petersburg genome Assembler—was originally developed for de novo assembly of genome sequencing data produced for cultivated microbial isolates and for single-cell genomic DNA sequencing. With time, the functionality of SPAdes was extended to enable assembly of IonTorrent data, as well as hybrid assembly from short and long reads (PacBio and Oxford Nanopore). In this article we present protocols for five different assembly pipelines that comprise the SPAdes package and that are used for assembly of metagenomes and transcriptomes as well as assembly of putative plasmids and biosynthetic gene clusters from whole-genome sequencing and metagenomic datasets.

ContigExtender: a new approach to improving de novo sequence assembly for viral metagenomics data

LEGE — Wed, 08 May 2024 07:32:45 -0500

ContigExtender, was developed to extend contigs, complementing de novo assembly. ContigExtender employs a novel recursive Overlap Layout Candidates (r-OLC) strategy that explores multiple extending paths to achieve longer and highly accurate contigs. ContigExtender is effective for extending contigs significantly in in silico synthesized and real metagenomics datasets.

More at https://www.ncbi.nlm.nih.gov/pmc/articles/PMC7953547/

Address of the bookmark: https://github.com/dengzac/contig-extender

MIKE: an ultrafast, assembly-, and alignment-free approach for phylogenetic tree construction

Abhi — Mon, 08 Apr 2024 06:19:52 -0500

MIKE (MinHash-based k-mer algorithm). This algorithm is designed for the swift calculation of the Jaccard coefficient directly from raw sequencing reads and enables the construction of phylogenetic trees based on the resultant Jaccard coefficient. Simulation results highlight the superior speed of MIKE compared to existing state-of-the-art methods. We used MIKE to reconstruct a phylogenetic tree, incorporating 238 yeast, 303 Zea, 141 Ficus, 67 Oryza, and 43 Saccharum spontaneum samples. MIKE demonstrated accurate performance across varying evolutionary scales, reproductive modes, and ploidy levels, proving itself as a powerful tool for phylogenetic tree construction.

Address of the bookmark: https://github.com/Argonum-Clever2/mike

Postdoc at UBritishColumbia in TroutGenomics

Thu, 22 Dec 2016 08:18:46 -0600

Landscape Genomics Postdoc at UBC A research team at the University of British Columbia’s Department of Zoology and Biodiversity Research Centre is seeking a postdoctoral researcher in landscape genetics of native rainbow trout (Oncorhynchus mykiss).

This project is part of a larger Genome Canada project on genetics and physiology of adaptation to climate change in rainbow trout, and the population genomics component is in the labs of Eric Taylor and Michael Whitlock. The landscape genomics component primarily involves whole genome sequencing approaches to understanding the genomic basis of adaptation to features of habitat, but also to provide insights into phylogeography and the influence of watershed structure on population subdivision in rainbow trout. A PhD in a related field with expertise in basic theory and bioinformatic analysis of population genomics data is required.

The position is available for one year with renewal for up to three additional years. Salary is $55,000 per year plus benefits. To apply, please send a brief cover letter summarizing your qualifications for the position, a CV, and the names, addresses, phone numbers and emails of three references.

Review of applications will begin January 16, 2017. Address application materials to etaylor@zoology.ubc.ca to whom any questions can also be addressed. etaylor@zoology.ubc.ca

Mauve: a system for constructing multiple genome alignments in the presence of large-scale evolutionary events such as rearrangement and inversion

Jit — Sat, 24 Dec 2016 09:20:53 -0600

Mauve is a system for constructing multiple genome alignments in the presence of large-scale evolutionary events such as rearrangement and inversion. Multiple genome alignments provide a basis for research into comparative genomics and the study of genome-wide evolutionary dynamics.

Mauve has been developed with the idea that a multiple genome aligner should require only modest computational resources. It employs algorithmic techniques that scale well in the lengths of sequences being aligned. For example, a pair of Y. pestis genomes can be aligned in under a minute, while a group of 9 divergent Enterobacterial genomes can be aligned in a few hours. However, the current algorithm’s compute time (progressiveMauve) scales cubically in the number of genomes to align, making it unsuitable for datasets containing more than 50-100 bacterial genomes.

Address of the bookmark: http://darlinglab.org/mauve/mauve.html

Studentship

Tue, 24 Jan 2017 04:26:14 -0600

Advt. No. ACBR/BTBI/BIF/Manpower/ADV/16-17
Research Associate/ Studentship/ Traineeship Jobs opportunity in University of Delhi - Dr. B.R. Ambedkar Center for Biomedical Research (ACBR) on temporary basis
Studentship
No. of Post : 01
Qualifications : Applicants who are pursuing Post Graduate Degree course/ Diploma in Bioinformatics/ Biomedical Sciences/ Biotechnology/Life Sciences/Chemistry/ Biochemistry with a programme in Bioinformatics to carry out the project.
Remuneration : Rs. 8,000/-
Traineeship
No. of Post : 01
Qualifications : Applicants who have completed their Post Graduate degree in Bioinformatics /Biomedical Sciences/Biotechnology/Life Sciences/Chemistry/Biochemistry or any other branch of Life Sciences with knowledge in Bioinformatics
Remuneration : Rs. 8,000/-
Research Associate
No. of Post : 01
Qualifications : Ph.D. in Bio-Medical Sciences/Bioinformatics/ Biotechnology/Life Sciences/ Chemistry/ Bio-Chemistry and related areas
Remuneration : Rs. 36,000/-

Applicant are required to bring applications on plain paper, stating the name, address, date of birth. educational qualifications and experiences and Institute, along with attested photocopies of mark sheets and certificates etc. at the time of Interview. Applications should also be sent by Entail to Dr. Madhu Chopra, Coordinator, BIF Facility. Email: acbrdu.blisnet@nic.in; mchopradu@gmail.com.
Interview Date : 13.02.2017
Time : 10:00 am-12:00 noon
Venue : ACBR

Many-Core Engine (MCE) for Perl example

Jit — Tue, 31 Jan 2017 05:37:50 -0600

MCE spawns a pool of workers and therefore does not fork a new process per each element of data. Instead, MCE follows a bank queuing model. Imagine the line being the data and bank-tellers the parallel workers. MCE enhances that model by adding the ability to chunk the next n elements from the input stream to the next available worker.

CORE MODULES

Three modules make up the core engine for MCE.

MCE::Core: Provides the Core API for Many-Core Engine. The various MCE options are described here.
MCE::Signal: Temporary directory creation, cleanup, and signal handling.
MCE::Util: Utility functions for Many-Core Engine.

MCE EXTRAS

There are 4 add-on modules for use with MCE.

MCE::Candy: Provides a collection of sugar methods and output iterators for preserving output order.
MCE::Mutex: Provides a simple semaphore implementation supporting threads and processes.
MCE::Queue: Provides a hybrid queuing implementation for MCE supporting normal queues and priority queues from a single module. MCE::Queue exchanges data via the core engine to enable queuing to work for both children (spawned from fork) and threads.
MCE::Relay: Enables workers to receive and pass on information orderly with zero involvement by the manager process while running.

MCE MODELS

The models take Many-Core Engine to a new level for ease of use. Two options (chunk_size and max_workers) are configured automatically as well as spawning and shutdown.

MCE::Loop: Provides a parallel loop utilizing MCE for building creative loops.
MCE::Flow: A parallel flow model for building creative applications. This makes use of user_tasks in MCE. The author has full control when utilizing this model. MCE::Flow is similar to MCE::Loop, but allows for multiple code blocks to run in parallel with a slight change to syntax.
MCE::Grep: Provides a parallel grep implementation similar to the native grep function.
MCE::Map: Provides a parallel map model similar to the native map function.
MCE::Step: Provides a parallel step implementation utilizing MCE::Queue between user tasks. MCE::Step is a spin off from MCE::Flow with a touch of MCE::Stream. This model, introduced in 1.506, allows one to pass data from one sub-task into the next transparently.
MCE::Stream: Provides an efficient parallel implementation for chaining multiple maps and greps together through user_tasks and MCE::Queue. Like with MCE::Flow, MCE::Stream can run multiple code blocks in parallel with a slight change to syntax from MCE::Map and MCE::Grep.

MISCELLANEOUS

Miscellaneous additions included with the distribution.

MCE::Examples: Describes various demonstrations for MCE including a Monte Carlo simulation.
MCE::Subs: Exports functions mapped directly to MCE methods; e.g. mce_wid. The module allows 3 options; :manager, :worker, and :getter.

REQUIREMENTS

Perl 5.8.0 or later. PDL::IO::Storable is required in scripts running PDL.

SOURCE AND FURTHER READING

The source, cookbook, and examples are hosted at GitHub.