BOL: Related items

Sybil

Jit — Wed, 07 Sep 2016 03:20:44 -0500

The Sybil software package provides a primarily web-based front-end to comparative genome datasets warehoused in a chado relational database. It was developed by the bioinformatics department at The Institute for Genomic Research (TIGR) and development continues at the J. Craig Venter Institute (JCVI) and the Institute for Genome Sciences (IGS) at the University of Maryland: Baltimore. Sybil has been used at TIGR/JCVI, IGS, NYU, New York Medical College, Novartis Vaccines and University of Maryland: College Park to support a number of research projects that involve comparative genome analysis. The following sections provide some high-level technical details about the overall architecture and external dependencies of the Sybil package.

Address of the bookmark: http://sybil.sourceforge.net/

VirMet

Jit — Mon, 10 Oct 2016 08:27:19 -0500

Watch out: only a few files are counted in coverage statistics.

Full documentation on Read the Docs.

A set of tools for viral metagenomics.

virmet is called with a command subcommand syntax: virmet fetch --viral n, for example, downloads the bacterial database. Other available subcommands so far are

fetch download genomes
update update viral/bacterial database
index index genomes
wolfpack analyze a Miseq run
covplot plot coverage for a specific organism

A short help is obtained with virmet subcommand -h.

More at https://github.com/ozagordi/VirMet

Address of the bookmark: https://github.com/ozagordi/VirMet

Referee: Genome assembly quality scores

Jit — Sun, 04 Nov 2018 16:44:30 -0600

Modern genome sequencing technologies provide a succint measure of quality at each position in every read, however all of this information is lost in the assembly process. Referee summarizes the quality information from the reads that map to a site in an assembled genome to calculate a quality score for each position in the genome assembly.

We accomplish this by first calculating genotype likelihoods for every site. For a given site in a diploid genome, there are 10 possible genotypes (AA, AC, AG, AT, CC, CG, CT, GG, GT, TT). Referee takes as input the genotype likelihoods calculated for all 10 genotypes given the called reference base at each position.

Referee is a program to calculate a quality score for every position in a genome assembly. This allows for easy filtering of low quality sites for any downstream analysis.

https://github.com/gwct/referee

Address of the bookmark: https://gwct.github.io/referee/#

Ribbon !!

Jit — Fri, 21 Oct 2016 04:54:30 -0500

Visualization has played an extremely important role in the current genomic revolution to inspect and understand variants, expression patterns, evolutionary changes, and a number of other relationships. However, most of the information in read-to-reference or genome-genome alignments is lost for structural variations in the one-dimensional views of most genome browsers showing only reference coordinates. Instead, structural variations captured by long reads or assembled contigs often need more context to understand, including alignments and other genomic information from multiple chromosomes. We have addressed this problem by creating Ribbon (genomeribbon.com) an interactive online visualization tool that displays alignments along both reference and query sequences, along with any associated variant calls in the sample. This way Ribbon shows patterns in alignments of many reads across multiple chromosomes, while allowing detailed inspection of individual reads (Supplementary Note 1). For example, here we show a gene fusion in the SK-BR-3 breast cancer cell line linking the genes CYTH1 and EIF3H. While it has been found in the transcriptome previously, genome sequencing did not identify a direct chromosomal fusion between these two genes. After SMRT sequencing, Ribbon shows that there are indeed long reads that span from one gene to the other, going through not one but two variants, for the first time showing the genomic link between these two genes (Figure 1a). More gene fusions of this cancer cell line are investigated in Supplementary Note 2. Figure 1b shows another complex event in this sample made simple in Ribbon: the translocation of a 4.4 kb sequence deleted from chr19 and inserted into chr16 (Figure 1b). Thus, Ribbon enables understanding of complex variants, and it may also help in the detection of sequencing and sample preparation issues, testing of aligners and variant-callers, and rapid curation of structural variant candidates (Supplementary Note 3). In addition to SAM and BAM files with long, short, or paired-end reads, Ribbon can also load coordinate files from whole genome aligners such as MUMmer. Therefore, Ribbon can be used to test assembly algorithms or inspect the similarity between species. Supplementary Note 4 shows a comparison of gorilla and human genomes using Ribbon, highlighting major structural differences. In conclusion, Ribbon is a powerful interactive web tool for viewing complex genomic alignments.

Script at https://github.com/MariaNattestad/ribbon

Address of the bookmark: http://genomeribbon.com/

eFORGE.v1.2

Jit — Fri, 28 Oct 2016 09:06:59 -0500

The eFORGE tool provides a method to view the tissue specific regulatory component of a set of EWAS DMPs. eFORGE analysis takes a set of DMPs, such as those hits above genome-wide significance threshold in an EWAS study, and analyses whether there is enrichment for overlap of putative functional elements compared to matched background DMPs. It assesses enrichment on a per cell type basis, since functional elements are differentially active in different cell types, and hence can expose tissue-specific signals of enrichment for the given test DMP set. This can reveal the sites of action underlying the EWAS signal, and provide confirmation of the validity of the EWAS where a tissue-specific mechanism is known or expected for the phenotype. Conversely unknown tissue involvements can also be revealed.

Address of the bookmark: http://eforge.cs.ucl.ac.uk/eFORGE.v1.2/?documentation

BIMA V3: an aligner customized for mate pair library sequencing

Abhimanyu Singh — Wed, 14 Dec 2016 15:20:00 -0600

Summary: Mate pair library sequencing is an effective and economical method for detecting genomic structural variants and chromosomal abnormalities. Unfortunately, the mapping and alignment of mate pair read pairs to a reference genome is a challenging and
time consuming process for most NGS alignment programs. Large insert sizes, introduction of library preparation protocol artifacts (biotin junction reads, paired-end read contamination, chimeras, etc.), and presence of structural variant breakpoints within reads increases mapping and alignment complexity. We describe an algorithm that is up to 20 times faster and 25% more accurate than popular NGS alignment programs when processing mate pair sequencing.
Availability: http://bioinformaticstools.mayo.edu/research/bima/
Contact: vasmatzis.george@mayo.edu

Address of the bookmark: http://bioinformatics.oxfordjournals.org/content/early/2014/02/12/bioinformatics.btu078.full.pdf

pyScaf

Bulbul — Mon, 19 Dec 2016 14:20:33 -0600

pyScaf orders contigs from genome assemblies utilising several types of information:

paired-end (PE) and/or mate-pair libraries (NGS-based mode)
long reads (NGS-based mode)
synteny to the genome of some related species (reference-based mode)

Scaffolding

In reference-based mode, pyScaf uses synteny to the genome of closely related species in order to order contigs and estimate distances between adjacent contigs.

Contigs are aligned globally (end-to-end) onto reference chromosomes, ignoring:

matches not satisfying cut-offs (--identity and --overlap)
suboptimal matches (only best match of each query to reference is kept)
and removing overlapping matches on reference.

In preliminary tests, pyScaf performed superbly on simulated heterozygous genomes based on C. parapsilosis (13 Mb; CANPA) and A. thaliana (119 Mb; ARATH) chromosomes, reconstructing correctly all chromosomes always for CANPA and nearly always for ARATH (Figures in dropbox, CANPA table, ARATH table).
Runs took ~0.5 min for CANPA on 4 CPUs and ~2 min for ARATH on 16 CPUs.

Important remarks:

Reduce your assembly before (fasta2homozygous.py) as any redundancy will likely break the synteny.
pyScaf works better with contigs than scaffolds, as scaffolds are often affected by mis-assemblies (no de novo assembler / scaffolder is perfect...), which breaks synteny.
pyScaf works very well if divergence between reference genome and assembled contigs is below 20% at nucleotide level.
pyScaf deals with large rearrangements ie. deletions, insertion, inversions, translocations. Note however, this is experimental implementation!
Consider closing gaps after scaffolding.

Address of the bookmark: https://github.com/lpryszcz/pyScaf

The Genome 10K Project

Tue, 29 Jul 2014 09:11:04 -0500

https://genome10k.soe.ucsc.edu The Genome 10K project aims to assemble a genomic zoo—a collection of DNA sequences representing the genomes of 10,000 vertebrate species, approximately one for every vertebrate genus. The trajectory of cost reduction in DNA sequencing suggests that this project will be feasible within a few years. Capturing the genetic diversity of vertebrate species would create an unprecedented resource for the life sciences and for worldwide conservation efforts. The growing Genome 10K Community of Scientists (G10KCOS), made up of leading scientists representing major zoos, museums, research centers, and universities around the world, is dedicated to coordinating efforts in tissue specimen collection that will lay the groundwork for a large-scale sequencing and analysis project.

Picard

Neel — Fri, 29 Apr 2016 08:21:54 -0500

Picard is a set of command line tools for manipulating high-throughput sequencing (HTS) data and formats such as SAM/BAM/CRAM and VCF. These file formats are defined in the Hts-specs repository. See especially the SAM specification and the VCF specification.

Note that the information on this page is targeted at end-users. For developers, the source code, building instructions and implementation/development resources are available on GitHub.

The Picard toolkit is open-source under the MIT license and free for all uses.

Enjoy!

Address of the bookmark: http://broadinstitute.github.io/picard/

Sequence assembly with MIRA 4

Priya Singh — Wed, 06 Apr 2016 08:21:22 -0500

MIRA is a multi-pass DNA sequence data assembler/mapper for whole genome and EST/RNASeq projects. MIRA assembles/maps reads gained by

electrophoresis sequencing (aka Sanger sequencing)
454 pyro-sequencing (GS20, FLX or Titanium)
Ion Torrent
Solexa (Illumina) sequencing
(in development) Pacific Biosciences sequencing

into contiguous sequences (called contigs). One can use the sequences of different sequencing technologies either in a single assembly run (a true hybrid assembly) or by mapping one type of data to an assembly of other sequencing type (a semi-hybrid assembly (or mapping)) or by mapping a data against consensus sequences of other assemblies (a simple mapping).

The MIRA acronym stands for Mimicking Intelligent Read Assembly and the program pretty well does what its acronym says (well, most of the time anyway). It is the Swiss army knife of sequence assembly that I've used and developed during the past 14 years to get assembly jobs I work on done efficiently - and especially accurately. That is, without me actually putting too much manual work into it.

More at http://mira-assembler.sourceforge.net/docs/DefinitiveGuideToMIRA.html

Address of the bookmark: http://mira-assembler.sourceforge.net/docs/DefinitiveGuideToMIRA.html