BOL: Related items

Bioinformatics Technical Position at CDAC Pune - India

Mon, 01 Aug 2016 03:36:26 -0500

CDAC Pune Recruitment 2016 – Apply Online for Technical Positions: Department of Information Technology under the Ministry of Communications and Information Technology, Government of India, Centre for Development of Advanced Computing (C-DAC), Pune has advertised notification for the recruitment of Technical vacancies for for PwD candidates n direct recruitment basis. Eligible candidates can apply Online from 27-07-2016 at 10.00 AM to 31-08-2016 at 18.00 PM.. Other information like age limit, educational qualification, selection process & how to apply are given below…

CDAC Pune Vacancy Details:
Total No. of Posts: 23

Name of the Post: Technical

Name of the Discipline:
A. Computer Science/ Information Technology and Allied disciplines.

B.Electronics Communications/ Electrical/ Telecommunication/Instrumentation & Control/ Medical Electronics/ Power Electronics/ VLSI & Embedded System and Allied disciplines.

C.Biotechnology/ Bioinformatics/ Health informatics/ Geoinformatics/ Meteorology/ Environmental Science/ Ocean Sciences/Oceanography/Environmental Engineering

1. Visually Impaired: 09 Posts

2. Hearing Impaired: 08 Posts

3. Orthopedically Impaired: 06 Posts

Educational Qualification : Candidates should possess Graduation in relvany discpline with relevant experience.

Selection Process: Candidates will be selected based on applicants performance in interview.

How to Apply: Eligible candidates can apply online through the website www.cdac.in from 27-07-2016 at 10.00 AM to 31-08-2016 at 18.00 PM.

More at http://www.cdac.in/index.aspx?id=current_jobs

Omega2: metagenome assembly pipeline

Jit — Mon, 10 Jul 2017 05:56:07 -0500

Omega found overlaps between reads using a prefix/suffix hash table. The overlap graph of reads was simplified by removing transitive edges and trimming short branches. Unitigs were generated based on minimum cost flow analysis of the overlap graph and then merged to contigs and scaffolds using mate-pair information. In comparison with three de Bruijn graph assemblers (SOAPdenovo, IDBA-UD and MetaVelvet), Omega provided comparable overall performance on a HiSeq 100-bp dataset and superior performance on a MiSeq 300-bp dataset. In comparison with Celera on the MiSeq dataset, Omega provided more continuous assemblies overall using a fraction of the computing time of existing overlap-layout-consensus assemblers. This indicates Omega can more efficiently assemble longer Illumina reads, and at deeper coverage, for metagenomic datasets.

Address of the bookmark: http://omega.omicsbio.org/

Research Project at IIT, Madras

Wed, 17 Aug 2016 03:26:06 -0500

Two project positions are available to work on (i) molecular modeling and molecular dynamics simulations and (ii) development of bioinformatics databases and tools at Protein Bioinformatics Lab, Department of Biotechnology, IIT Madras.

Duration : Initially for a period of one year. Extendable based on the performance.

Qualification: (i) MSc in Bioinformatics, Biotechnology, Physics, Biophysics, Biochemistry,Computer Science with NET (UGC/CSIR/GATE/BINC/INSPIRE etc) qualification. (OR) (ii) M. Tech in Bioinformatics, Biotechnology

Additional qualification: Programming skills

Candidates who fulfill the requirements of IIT have the possibility to register for PhD.

Fellowship: Rs.25,000 and HRA.

Applicants are encouraged to send the CV to the coordinator by postal mail and e-mail. The deadline to receive the applications is 31st August 2016. The project coordinator has the discretion to restrict the number of candidates to be called for interview to a reasonable limit on the basis of qualifications and experience higher than the minimum prescribed in the announcement.

Project Co-ordinator:

Dr. M. Michael Gromiha
Department of Biotechnology
Indian Institute of Technology Madras
Chennai 600036
Email: gromiha@iitm.ac.in

miniasm: very fast OLC-based de novo assembler for noisy long reads

Jit — Mon, 27 Nov 2017 07:58:49 -0600

Miniasm is a very fast OLC-based de novo assembler for noisy long reads. It takes all-vs-all read self-mappings (typically by minimap) as input and outputs an assembly graph in the GFA format. Different from mainstream assemblers, miniasm does not have a consensus step. It simply concatenates pieces of read sequences to generate the final unitig sequences. Thus the per-base error rate is similar to the raw input reads.

So far miniasm is in early development stage. It has only been tested on a dozen of PacBio and Oxford Nanopore (ONT) bacterial data sets. Including the mapping step, it takes about 3 minutes to assemble a bacterial genome. Under the default setting, miniasm assembles 9 out of 12 PacBio datasets and 3 out of 4 ONT datasets into a single contig. The 12 PacBio data sets are PacBio E. coli sample, ERS473430, ERS544009, ERS554120, ERS605484, ERS617393, ERS646601, ERS659581, ERS670327, ERS685285, ERS743109 and a deprecated PacBio E. coli data set. ONT data are acquired from the Loman Lab.

For a C. elegans PacBio data set (only 40X are used, not the whole dataset), miniasm finishes the assembly, including reads overlapping, in ~10 minutes with 16 CPUs. The total assembly size is 105Mb; the N50 is 1.94Mb. In comparison, the HGAP3produces a 104Mb assembly with N50 1.61Mb. This dotter plot gives a global view of the miniasm assembly (on the X axis) and the HGAP3 assembly (on Y). They are broadly comparable. Of course, the HGAP3 consensus sequences are much more accurate. In addition, on the whole data set (assembled in ~30 min), the miniasm N50 is reduced to 1.79Mb. Miniasm still needs improvements.

Miniasm confirms that at least for high-coverage bacterial genomes, it is possible to generate long contigs from raw PacBio or ONT reads without error correction. It also shows that minimap can be used as a read overlapper, even though it is probably not as sensitive as the more sophisticated overlapers such as MHAP and DALIGNER. Coupled with long-read error correctors and consensus tools, miniasm may also be useful to produce high-quality assemblies.

Minimap and miniasm are ultrafast tools for (i) mapping and (ii) assembly. Designed for long, noisy reads, they do not have a correction or consensus step, and therefore the resulting assemblies are contiguous (i.e. long) but very noisy (i.e. full of errors)

We start with an all against all comparison:

minimap -Sw5 -L100 -m0 -t8 reads.fq reads.fq | gzip -1 > reads.paf.gz

Then we can assemble

miniasm -f reads.fq reads.paf.gz > reads.gfa

Convert GFA to FASTA:

awk '/^S/{print ">"$2"\n"$3}' reads.gfa | fold > reads.fa

And then count how many contigs:

grep ">" reads.fa | wc -l

# Download sample PacBio from the PBcR website
wget -O- http://www.cbcb.umd.edu/software/PBcR/data/selfSampleData.tar.gz | tar zxf -
ln -s selfSampleData/pacbio_filtered.fastq reads.fq
# Install minimap and miniasm (requiring gcc and zlib)
git clone https://github.com/lh3/minimap && (cd minimap && make)
git clone https://github.com/lh3/miniasm && (cd miniasm && make)
# Overlap
minimap/minimap -Sw5 -L100 -m0 -t8 reads.fq reads.fq | gzip -1 > reads.paf.gz
# Layout
miniasm/miniasm -f reads.fq reads.paf.gz > reads.gfa

Address of the bookmark: https://github.com/lh3/miniasm

MashMap: a fast and approximate software for mapping long reads (PacBio/ONT) or assembly to reference genome(s)

Jit — Tue, 12 Dec 2017 17:23:31 -0600

MashMap is a fast and approximate software for mapping long reads (PacBio/ONT) or assembly to reference genome(s). It maps a query sequence against a reference region if and only if its estimated alignment identity is above a specified threshold. It does not compute the alignments explicitly, but rather estimates a k-mer based Jaccard similarity using a combination of Winnowing and MinHash. This is then converted to an estimate of sequence identity using the Mash distance. An appropriate k-mer sampling rate is automatically determined given minimum local alignment length and identity thresholds. The efficiency of the algorithm improves as both of these thresholds are increased.

Address of the bookmark: https://github.com/marbl/MashMap

RGFA: powerful and convenient handling of assembly graphs

Rahul Nayak — Thu, 25 Jan 2018 05:47:53 -0600

RGFA, an implementation of the proposed GFA specification in Ruby. It allows the user to conveniently parse, edit and write GFA files. Complex operations such as the separation of the implicit instances of repeats and the merging of linear paths can be performed. A typical application of RGFA is the editing of a graph, to finish the assembly of a sequence, using information not available to the assembler. We illustrate a use case, in which the assembly of a repetitive metagenomic fosmid insert was completed using a script based on RGFA.

https://github.com/ggonnella/rgfa

Address of the bookmark: https://www.ncbi.nlm.nih.gov/pmc/articles/PMC5103826/

SRF Bioinformatics job position in National Institute of Plant Genome Research (NIPGR)

Mon, 19 Sep 2016 05:43:38 -0500

SRF Bioinformatics job position in National Institute of Plant Genome Research (NIPGR)
Title : “Transcriptome and small RNA diversity analysis of developing seed contrasting rice varieties”
Qualification : Candidates having M.Sc./M.Tech. degree or equivalent (with minimum 60% marks) in Bioinformatics with a minimum of two years of post M.Sc./M.Tech research experience are eligible to apply.
No. of Post : 01
How to apply
Application should reach to Dr. Pinky Agarwal, Staff Scientist, National Institute of Plant Genome Research (NIPGR) Aruna Asaf Ali Marg, P.O. Box NO. 10531, New Delhi - 110067 on or before 30/09/2016

More at http://www.nipgr.res.in/careers/vacancies_latest.php#

MECAT: fast mapping, error correction, and de novo assembly for single-molecule sequencing reads

Rahul Nayak — Fri, 11 May 2018 05:07:45 -0500

MECAT is an ultra-fast Mapping, Error Correction and de novo Assembly Tools for single molecula sequencing (SMRT) reads. MECAT employs novel alignment and error correction algorithms that are much more efficient than the state of art of aligners and error correction tools. MECAT can be used for effectively de novo assemblying large genomes. For example, on a 32-thread computer with 2.0 GHz CPU , MECAT takes 9.5 days to assemble a human genome based on 54x SMRT data, which is 40 times faster than the current PBcR-Mhap pipeline. MECAT performance were compared with PBcR-Mhap pipeline, FALCON and Canu(v1.3) in five real datasets. The quality of assembled contigs produced by MECAT is the same or better than that of the PBcR-Mhap pipeline and FALCON.

https://www.nature.com/articles/nmeth.4432

Address of the bookmark: https://github.com/xiaochuanle/MECAT

Cerulean: A hybrid assembly using high throughput short and long reads

Rahul Nayak — Tue, 05 Jun 2018 10:10:15 -0500

Cerulean extends contigs assembled using short read datasets like Illumina paired-end reads using long reads like PacBio RS long reads. Cerulean v0.1 has been implemented with bacterial genomes in mind. The method is fully described in Deshpande, V., Fung, E. D., Pham, S., & Bafna, V. (2013). Cerulean: A hybrid assembly using high throughput short and long reads. arXiv preprint arXiv:1307.7933. http://arxiv.org/abs/1307.7933

Address of the bookmark: https://sourceforge.net/projects/ceruleanassembler/

ChopStitch: exon annotation and splice graph construction using transcriptome assembly and whole genome sequencing data

Rahul Nayak — Tue, 03 Jul 2018 04:14:52 -0500

ChopStitch is a new method for finding putative exons and constructing splice graphs using an assembled transcriptome and whole genome shotgun sequencing (WGSS) data. ChopStitch identifies exon-exon boundaries in de novo assembled RNA-seq data with the help of a Bloom filter that represents the k-mer spectrum of WGSS reads. The algorithm also detects base substitutions in transcript sequences corresponding to sequencing or assembly errors, haplotype variations, or putative RNA editing events. The primary output of our tool is a FASTA file containing putative exons. Further, exon edges are interrogated for alternative exon-exon boundaries to detect transcript isoforms, which are reported as splice graphs in dot output format.

Address of the bookmark: https://github.com/bcgsc/ChopStitch