BOL: Related items

BBMap/BBTools package: Multipurpose tool designed for converting reads or other nucleotide data between different formats.

Jit — Mon, 13 Jun 2016 05:47:21 -0500

Reformatis a member of the BBMap/BBTools package. It is a multipurpose tool designed for converting reads or other nucleotide data between different formats. It supports, and can inter-convert:

fastq
fasta
fasta+qual
sam
scarf (an old Illumina format)
bam (if samtools is installed)
gzip
zip
ascii-33 (sanger)
ascii-64 (old Illumina)
paired files
interleaved files

It is multithreaded and can process data at over 500 megabytes per second, and can accept streams from standard in and write to standard out, allowing it to be easily dropped into the middle of a pipeline for format conversion. Reformat autodetects formats based on file extensions and content, making it very easy to use; and the autodetection can be overridden, allowing flexibility for people who don't like to follow naming conventions, or out-of-spec fastq files with qualities values like -17 or 120.

The program has been gradually expanded, and can now perform various other functions. None of these will break pairing, if the input is paired.

Quality trimming (either or both ends)
Quality filtering
Fixed-length trimming
Generation of histograms (base composition, quality, etc)
Subsampling (to a fraction of input reads, or an exact number of reads or bases)
Changing fasta line-wrapping length
Reverse-complementing (all reads or only read 2)
Adding /1 and /2 suffix to read names
GC-content filtering
Length-filtering
Testing for corrupted interleaved files

Reformat is compatible with any platform that supports Java 1.7 or higher. It also has a bash shellscript for simpler invocation. Typical usage examples:

Reformat fastq into fasta:
reformat.sh in=x.fq out=y.fa

Interleave paired reads:
reformat.sh in1=x1.fq in2=x2.fq out=y.fq

Note - you can actually use a shortcut if paired read files have the same name with a 1 and a 2. This is equivalent to the above command:
reformat.sh in=x#.fq out=y.fq

De-interleave reads:
reformat.sh in=x.fq out1=y1.fq out2=y2.fq

Verify that interleaving appears correct, assuming Illumina namimg conventions:
reformat.sh in=x.fq vint

Convert ASCII-33 to ASCII-64:
reformat.sh in=x.fq out=y.fq qin=33 qout=64

Quality-trim paired reads to Q10 on the left and right ends and discard reads shorter than 50bp after trimming:
reformat.sh in1=x1.fq in2=x2.fq out1=y1.fq out2=y2.fq outsingle=singletons.fq qtrim=rl trimq=10 minlength=50

Subsample 10% of the first 20000 pairs in an interleaved file:
reformat.sh in=x.fq out=y.fq reads=20000 samplerate=0.1 int=t
(in this case "int=t" overrides interleaving autodetection, to ensure reads are treated as pairs)

Pipe in a gzipped sam file and pipe out fasta:
reformat.sh in=stdin.sam.gz out=stdout.fa

Reverse-complement reads:
reformat.sh in=x.fq out=y.fq rcomp

For reformatting a file with very long sequences, Reformat will need more memory; just add the additional flag "-Xmx2g". For example, to change the line-wrapping length on the human genome (which has individual sequences over 200Mbp long) to 70 characters:
reformat.sh -Xmx2g in=HG19.fa.gz out=HG19_wrapped.fa.gz fastawrap=70

For additional functions, please run the shellscript with no arguments, or just read it with a text editor. If you have any questions, please post them in this thread.

For people using a non-bash terminal, you may need to type "bash reformat.sh" instead of just "reformat.sh".
For users of Windows or other platforms that do not support bash shellscripts, replace "reformat.sh" with "java -ea -Xmx200m /path/to/bbmap/current/ jgi.ReformatReads"
for example,
java -ea -Xmx200m C:\bbmap\current\ jgi.ReformatReads in=x.fq out=y.fa

Reformat can be downloaded with BBTools here:
https://sourceforge.net/projects/bbmap/

KisSplice

Jit — Tue, 16 Aug 2016 08:34:19 -0500

KisSplice is a software that enables to analyse RNA-seq data with or without a reference genome. It is an exact local transcriptome assembler that allows to identify SNPs, indels and alternative splicing events. It can deal with an arbitrary number of biological conditions, and will quantify each variant in each condition. It has been tested on Illumina datasets of up to 1G reads. Its memory consumption is around 5Gb for 100M reads.

KisSplice is not a full-length transcriptome assembler. This means that it will output the variable regions of the transcripts, not reconstruct them entirely.

KisSplice comes as a workflow, with several possible post-treatments meant to facilitate the analysis of the results. The choice of the post-treatment depends on the availability of a reference genome/transcriptome and on the need to perform a differential analysis, as summarised in the following table.

Address of the bookmark: http://kissplice.prabi.fr/

A5-miseq

Jit — Thu, 18 Aug 2016 04:05:23 -0500

_A5-miseq_ is a pipeline for assembling DNA sequence data generated on the Illumina sequencing platform. This README will take you through the steps necessary for running _A5-miseq_.

Point to note:

There are many situations where A5-miseq is not the right tool for the job. In order to produce accurate results, A5-miseq requires Illumina data with certain characteristics. A5-miseq will likely not work well with Illumina reads shorter than around 80nt, or reads where the base qualities are low in all or most reads before 60nt. A5-miseq assumes it is assembling homozygous haploid genomes. Use a different assembler for metagenomes and heterozygous diploid or polyploid organisms. Use a different assembler if a tool like FastQC reports your data quality is dubious. You have been warned! Datasets consisting solely of unpaired reads are not currently supported.

Address of the bookmark: https://sourceforge.net/projects/ngopt/

Kraken: ultrafast metagenomic sequence classification using exact alignments

Jit — Mon, 27 Jun 2016 11:01:44 -0500

Kraken is an ultrafast and highly accurate program for assigning taxonomic labels to metagenomic DNA sequences. Previous programs designed for this task have been relatively slow and computationally expensive, forcing researchers to use faster abundance estimation programs, which only classify small subsets of metagenomic data. Using exact alignment of k-mers, Kraken achieves classification accuracy comparable to the fastest BLAST program. In its fastest mode, Kraken classifies 100 base pair reads at a rate of over 4.1 million reads per minute, 909 times faster than Megablast and 11 times faster than the abundance estimation program MetaPhlAn. Kraken is available at http://ccb.jhu.edu/software/kraken/.

Krona

https://sourceforge.net/p/krona/home/krona/

Address of the bookmark: http://www.ncbi.nlm.nih.gov/pmc/articles/PMC4053813/

Fancy Oneliner for Bioinformatics !!

Poonam Mahapatra — Thu, 07 Jul 2016 12:05:50 -0500

This webpage lists some of the one-liners that we frequently use in metagenomic analyses. You can click on the following links to browse through different topics. You can copy/paste the commands as they are in your terminal screen, provided you follow the same naming conventions and folder structures as we have. We are sharing these codes with the intention that if they are useful and help you in your analyses, then we will be appropriately credited as considerable effort has been put into devising them.

Address of the bookmark: http://userweb.eng.gla.ac.uk/umer.ijaz/bioinformatics/oneliners.html

MEGAN6

Neel — Mon, 25 Jul 2016 05:45:22 -0500

Microbiome analysis using a single application

MEGAN6 is a comprehensive toolbox for interactively analyzing microbiome data. All the interactive tools you need in one application.

Taxonomic analysis using the NCBI taxonomy or a customized taxonomy such as SILVA
Functional analysis using InterPro2GO, SEED, eggNOG or KEGG
Bar charts, word clouds, Voronoi tree maps and many other charts
PCoA, clustering and networks
Supports metadata
MEGAN parses many different types of input

Why use MEGAN6?

The software is:

Easy to use. MEGAN6 is a single application and all features are available through menus, toolbars and graphics. No scripting skills required.
Powerful. MEGAN6 allows you to work with hundreds of samples containing hundreds of millions of sequencing reads. Blast-like analysis can be performed using DIAMOND.
Comprehensive. MEGAN6 offers a large range of analysis tools, and is under active development.

Address of the bookmark: https://ab.inf.uni-tuebingen.de/software/megan6

Comparison of Short Read De Novo Alignment Algorithms

Rahul Agarwal — Wed, 21 Aug 2013 07:56:01 -0500

Excellent article to introduce different sequencing methods along with tools for de novo assembly of sequencing reads and their relevant references.

Title: Comparison of Short Read De Novo Alignment Algorithms

Author: Nikhil Gopal

Address of the bookmark: http://biochem218.stanford.edu/Projects%202011/Gopal%202011.pdf

coursera genome assembly tutorial

Jit — Sat, 25 Nov 2017 08:57:25 -0600

Solutions to Coursera Genome Sequencing (Bioinformatics II)

Address of the bookmark: https://github.com/iansealy/coursera-assembly

WALK-IN INTERVIEW @ JIPMER

Mon, 05 Sep 2016 04:01:13 -0500

Department of Preventive and Social Medicine
, JIPMER, Puducherry –605006

WALK-IN INTERVIEW

JIP/PSM/INDO-US TB/ 2016/

Walk-in-interview for the following vacant posts funded by Department of Biotechnology, Govt.of India for the project entitled “Biomarkers for Risk of Tuberculosis and for Tuberculosis Treatment Failure and Relapse” in the Department of Preventive & Social Medicine, JIPMER, Puducherry.

3. Technical Assistant

MCA/ MSc in Biostatistics/ MSc in Computational Biology from any recognized University @ Rs.23,220 1

Interested candidates may attend the walk-in interview with written screening test on 07, September 2016 at 9.30 A.M in the Dept. of Preventive and Social Medicine, IV Floor, Administrative Block, JIPMER.

The applicants are requested to bring the filled in application form and bio-data with original certificates for verification.

More Info: http://jipmer.edu.in/wp-content/uploads/2016/09/RECRUITEMENTsite-protocol-7.9.2016.pdf

COPE: an accurate k-mer-based pair-end reads connection tool to facilitate genome assembly

Jit — Wed, 06 Dec 2017 02:08:14 -0600

An efficient tool called Connecting Overlapped Pair-End (COPE) reads, to connect overlapping pair-end reads using k-mer frequencies. We evaluated our tool on 30× simulated pair-end reads from Arabidopsis thaliana with 1% base error. COPE connected over 99% of reads with 98.8% accuracy, which is, respectively, 10 and 2% higher than the recently published tool FLASH. When COPE is applied to real reads for genome assembly, the resulting contigs are found to have fewer errors and give a 14-fold improvement in the N50 measurement when compared with the contigs produced using unconnected reads.

Address of the bookmark: ftp://ftp.genomics.org.cn/pub/cope