Bioinformatics : https://www.linkedin.com/jobs/view/2681785372/

Engineer: https://www.linkedin.com/jobs/view/2681796993/

No.: SPU/CISST/Advt./2014-15/519

ADVERTISEMENT for Teaching Positions (Contractual)

Applications for the following Contractual Teaching Position are invited for Centre for Interdisciplinary Studies in Science and Technology (CISST), Sardar Patel University:

2. Assistant Professor (ONE) (Contractual)

For the subject of Bioinformatics

Qualifications:

(I) Good academic record as defined by the concerned university with at least 55 % marks (or an equivalent grade in a point scale wherever grading system is followed) at the Master’s level

(II) Ph.D. degree in the concerned subject or in a relevant interdisciplinary subject
from an Indian University or NET/SLET clearance Contractual appointment carries a total Fixed Emoluments of Rs. 30,000/- p.m without any assurance of permanent Positions and related benefits.

An Application Form in prescribed Performa, available on University Website: www.spuvvn.edu should be filled in completely in Twelve Copies with self attested copies of certificates of qualifications and experience. Only one copy of each mark sheet be attached with the first copy of the application form. All 12 (Twelve) Application forms should be sent to Registrar’s office along with Demand Draft of Application form fee of Rs. 250/- (Non-refundable) in favour of “REGISTRAR, SARDAR PATEL UNIVERSITY, VALLABH VIDYANAGAR”. The S.C. and S.T. category candidates need not to pay Application fee.

Applicants who are in service should apply through their present employers. Candidates called for interview shall be required to attend at their own cost.

In absence of suitable candidate, the University may relax the eligibility criteria, for conditional appointment.

The last date of receipt of application by the University is 30th April, 2014

Advertisement: www.spuvvn.edu/careers/CISST%20Advt.%20April%202014.pdf

Address of the bookmark: https://biokit.readthedocs.io/en/latest/index.html

No of vacancies: 01

Pay scale:Rs. 15600 – 39100 + 6600/-

Essential Academic Qualifications / Experience : Good academic record as defined by the concerned university with at least 55% marks (or an equivalent grade in a point scale wherever grading system is followed) at the Master's Degree level in a relevant subject from an Indian University, or an equivalent degree from an accredited foreign university.

Besides fulfilling the above qualifications, the candidate must have cleared the National Eligibility Test (NET) conducted by the UGC, CSIR or similar test accredited by the UGC like SLET/ SET.

Notwithstanding anything contained in sub-clauses (a) and (b) to this Clause, candidates, who are, or have been awarded a Ph.D. Degree in accordance with the University Grants Commission (Minimum Standards and Procedure for Award of Ph.D. Degree) Regulations, 2009, shall be exempted from the requirement of the minimum eligibility condition of NET/SLET/SET for recruitment and appointment of Assistant Professor or equivalent positions in Universities/Colleges/Institutions.

NET/SLET/SET shall also not be required for such Masters Programmes in disciplines for which NET/SLET/SET is not conducted.

Apply online: http://www.psc.cg.gov.in/htm/OA_ME2014.html

Last Date for Online Registration: 22/05/2014

For more details: http://www.psc.cg.gov.in/pdf/Advertisement/ADV_ME2014.pdf

The biggest and perhaps most fearsome of the world's big cats, the tiger, shares 95.6 percent of its DNA with humans' cute and furry companions, domestic cats.

The new research showed that big cats have genetic mutations that enabled them to be carnivores. The team also identified mutations that allow snow leopards to thrive at high altitudes.

Reference:

http://www.nbcnews.com/science/your-cat-ferocious-tigers-share-lot-95-6-percent-their-4B11182690

http://timesofindia.indiatimes.com/home/environment/flora-fauna/Gene-mapping-of-tiger-completed/articleshow/22671681.cms

Paper:

http://www.nature.com/ncomms/2013/130917/ncomms3433/full/ncomms3433.html

http://en.wikipedia.org/wiki/Sequence_assembly 

https://genomebiology.biomedcentral.com/articles/10.1186/s13059-016-0951-y

Address of the bookmark: https://sourceforge.net/projects/operasf/

More at http://www.ploscompbiol.org/article/info%3Adoi%2F10.1371%2Fjournal.pcbi.1000369

Address of the bookmark: http://www.ploscompbiol.org/article/info%3Adoi%2F10.1371%2Fjournal.pcbi.1000369

Again, running spades.py will show you the options:

spades.py

This produces:

SPAdes genome assembler v3.10.1

Usage: /usr/local/SPAdes-3.10.1-Linux/bin/spades.py [options] -o <output_dir>

Basic options:
-o      <output_dir>    directory to store all the resulting files (required)
--sc                    this flag is required for MDA (single-cell) data
--meta                  this flag is required for metagenomic sample data
--rna                   this flag is required for RNA-Seq data
--plasmid               runs plasmidSPAdes pipeline for plasmid detection
--iontorrent            this flag is required for IonTorrent data
--test                  runs SPAdes on toy dataset
-h/--help               prints this usage message
-v/--version            prints version

Input data:
--12    <filename>      file with interlaced forward and reverse paired-end reads
-1      <filename>      file with forward paired-end reads
-2      <filename>      file with reverse paired-end reads
-s      <filename>      file with unpaired reads
--pe<#>-12      <filename>      file with interlaced reads for paired-end library number <#> (<#> = 1,2,..,9)
--pe<#>-1       <filename>      file with forward reads for paired-end library number <#> (<#> = 1,2,..,9)
--pe<#>-2       <filename>      file with reverse reads for paired-end library number <#> (<#> = 1,2,..,9)
--pe<#>-s       <filename>      file with unpaired reads for paired-end library number <#> (<#> = 1,2,..,9)
--pe<#>-<or>    orientation of reads for paired-end library number <#> (<#> = 1,2,..,9; <or> = fr, rf, ff)
--s<#>          <filename>      file with unpaired reads for single reads library number <#> (<#> = 1,2,..,9)
--mp<#>-12      <filename>      file with interlaced reads for mate-pair library number <#> (<#> = 1,2,..,9)
--mp<#>-1       <filename>      file with forward reads for mate-pair library number <#> (<#> = 1,2,..,9)
--mp<#>-2       <filename>      file with reverse reads for mate-pair library number <#> (<#> = 1,2,..,9)
--mp<#>-s       <filename>      file with unpaired reads for mate-pair library number <#> (<#> = 1,2,..,9)
--mp<#>-<or>    orientation of reads for mate-pair library number <#> (<#> = 1,2,..,9; <or> = fr, rf, ff)
--hqmp<#>-12    <filename>      file with interlaced reads for high-quality mate-pair library number <#> (<#> = 1,2,..,9)
--hqmp<#>-1     <filename>      file with forward reads for high-quality mate-pair library number <#> (<#> = 1,2,..,9)
--hqmp<#>-2     <filename>      file with reverse reads for high-quality mate-pair library number <#> (<#> = 1,2,..,9)
--hqmp<#>-s     <filename>      file with unpaired reads for high-quality mate-pair library number <#> (<#> = 1,2,..,9)
--hqmp<#>-<or>  orientation of reads for high-quality mate-pair library number <#> (<#> = 1,2,..,9; <or> = fr, rf, ff)
--nxmate<#>-1   <filename>      file with forward reads for Lucigen NxMate library number <#> (<#> = 1,2,..,9)
--nxmate<#>-2   <filename>      file with reverse reads for Lucigen NxMate library number <#> (<#> = 1,2,..,9)
--sanger        <filename>      file with Sanger reads
--pacbio        <filename>      file with PacBio reads
--nanopore      <filename>      file with Nanopore reads
--tslr  <filename>      file with TSLR-contigs
--trusted-contigs       <filename>      file with trusted contigs
--untrusted-contigs     <filename>      file with untrusted contigs

Pipeline options:
--only-error-correction runs only read error correction (without assembling)
--only-assembler        runs only assembling (without read error correction)
--careful               tries to reduce number of mismatches and short indels
--continue              continue run from the last available check-point
--restart-from  <cp>    restart run with updated options and from the specified check-point ('ec', 'as', 'k<int>', 'mc')
--disable-gzip-output   forces error correction not to compress the corrected reads
--disable-rr            disables repeat resolution stage of assembling

Advanced options:
--dataset       <filename>      file with dataset description in YAML format
-t/--threads    <int>           number of threads
                                [default: 16]
-m/--memory     <int>           RAM limit for SPAdes in Gb (terminates if exceeded)
                                [default: 250]
--tmp-dir       <dirname>       directory for temporary files
                                [default: <output_dir>/tmp]
-k              <int,int,...>   comma-separated list of k-mer sizes (must be odd and
                                less than 128) [default: 'auto']
--cov-cutoff    <float>         coverage cutoff value (a positive float number, or 'auto', or 'off') [default: 'off']
--phred-offset  <33 or 64>      PHRED quality offset in the input reads (33 or 64)
                                [default: auto-detect]

As you can see this is also a “pipeline” of tools that can be switched on or off. SPAdes takes quite a long time, so for the purposes of this practical, something like this may suffice:

spades.py -t 4 \
          -m 32 \
          -k 31,51,71 \
          --only-assembler \
          -1 miseq.1.fastq -2 miseq.2.fastq \
          --nanopore minion.fastq \
          -o hybrid_assembly

In turn, these parameters mean

• use 4 threads
• max memory is 32Gb
• use 3 kmer values to build the de bruijn graph(s) - 31, 51 and 71
• only run the assembler, not the correction algorithm (for speed)
• read 1 and read 2 of the MiSeq data
• the nanopore data
• put the output in folder “hybrid_assembly”

ICRISAT seeks applications from Indian nationals Visiting Scientist-Computational Genomics (2 positions), to be part of a team of Centre of Excellence in Genomics (CEG), (www.icrisat.org/ceg) to work on legume genomics projects. The positions will be based at ICRISAT’s Headquarters in Patancheru, Hyderabad, India.

ICRISAT is a non-profit, non-political organization that conducts agricultural research for development in Asia and sub-Saharan Africa with a wide array of partners throughout the world. Covering 6.5 million square kilometers of land in 55 countries, the semi-arid tropics is home to over 2 billion people, with 650 million of these are the poorest of the poor. ICRISAT and its partners help empower those living in the semi-arid tropics, especially smallholder farmers, to overcome poverty, hunger, malnutrition and a degraded environment through more efficient and profitable agriculture. ICRISAT is headquartered in Greater Hyderabad, Andhra Pradesh, India and belongs to the Consortium of Centers supported by the Consultative Group on International Agricultural Research (CGIAR).

The Job: Responsibilities for these positions include:

Analyzing and handling large-scale next generation sequencing DNA and RNA data
Data mining and development of pipelines and troubleshooting
Genome diversity analysis such as SNPs, Indels, Structural Variations, population structure
Genome wide association study (GWAS) related analysis- LD analysis, hapmap and trait mapping
Expression analysis based on RNA-Seq data, annotation, gene ontology and metabolic pathway analysis
Epigenome analysis, small RNA identification
Gene family analysis, sequence level protein analysis, orthology/paralogy and molecular modelling
Compiling and analysis of results, writing reports and research papers

The Person: Ph.D. or MSc/MTech/PGDCA with two years research experience in Biotechnology, Computational biology, Agricultural/ Plant Biotechnology, Genetics, Molecular Biology or related discipline. Good knowledge of programming/scripting in at least two of following languages: Perl, C, C++, R, Shell Scripting and Python is plus.

How to apply: Please apply latest by 20 July 2014. The application should include the name of the position applied for, a letter of motivation, a full Curriculum Vita (CV), and the names and contact information of three references that are knowledgeable of the candidate’s professional qualifications and work experience. Technical details and more information about these positions can be obtained from R.K.VARSHNEY@CGIAR.ORG. All applications will be acknowledged, however only short listed candidates will be contacted.

Apply here https://recruit.zoho.com/ats/Portal.na?digest=T642sgLYWZOStExJ77cPrcM*sIMGZETWw4yPxngbmHA-