BOL: Related items

Scientists map 17,294 proteins produced in human body

Jit — Thu, 29 May 2014 01:57:55 -0500

Indian scientists missed the genomic profiling bus, but they've more than made up for it by creating the first human proteome map which is an extension of the genomic study. Till now, here is no direct equivalent for the human proteome. But recently two groups present mass spectrometry-based analysis of human tissues, body fluids and cells mapping the large majority of the human proteome.

The Indian scientists working in Bangalore, along with their American counterparts, have mapped more than 17,000 proteins in 30 organs of the human body. Just like the human genome was sequenced around the turn of the millennium, this is an equivalent mapping of the human proteome.

The researcher estimated there are around 20,500 proteins in the human body. These scientists have profiled around 17,294, which account for around 84% of the total proteins. Apart from this, the team also traced around 2,500 of 3,000 proteins that had been categorised as "missing proteins".

The work, done by group of Indian scientists, and Johns Hopkins University, published in the renowned journal Nature ( http://www.nature.com/nature/journal/v509/n7502/full/nature13302.html ). Of the 72 people who worked on the project, 46 are Indians.

Reference:

http://www.nature.com/nature/journal/v509/n7502/full/nature13302.html

http://www.proteinatlas.org/ -The antibody-based Human Protein Atlas programme

http://www.humanproteomemap.org/ -Proteogenomic analysis by identifying translated proteins from annotated pseudogenes, non-coding RNAs and untranslated regions.

https://www.proteomicsdb.org/ -Assembled protein evidence for 18,097 genes in ProteomicsDB

SPAdes hybrid genome assembly

Jit — Mon, 27 Nov 2017 08:05:40 -0600

When you have both Illumina and Nanopore data, then SPAdes remains a good option for hybrid assembly - SPAdes was used to produce the B fragilis assembly by Mick Watson’s group.

Again, running spades.py will show you the options:

spades.py

This produces:

SPAdes genome assembler v3.10.1

Usage: /usr/local/SPAdes-3.10.1-Linux/bin/spades.py [options] -o 

Basic options:
-o          directory to store all the resulting files (required)
--sc                    this flag is required for MDA (single-cell) data
--meta                  this flag is required for metagenomic sample data
--rna                   this flag is required for RNA-Seq data
--plasmid               runs plasmidSPAdes pipeline for plasmid detection
--iontorrent            this flag is required for IonTorrent data
--test                  runs SPAdes on toy dataset
-h/--help               prints this usage message
-v/--version            prints version

Input data:
--12          file with interlaced forward and reverse paired-end reads
-1            file with forward paired-end reads
-2            file with reverse paired-end reads
-s            file with unpaired reads
--pe<#>-12            file with interlaced reads for paired-end library number <#> (<#> = 1,2,..,9)
--pe<#>-1             file with forward reads for paired-end library number <#> (<#> = 1,2,..,9)
--pe<#>-2             file with reverse reads for paired-end library number <#> (<#> = 1,2,..,9)
--pe<#>-s             file with unpaired reads for paired-end library number <#> (<#> = 1,2,..,9)
--pe<#>-    orientation of reads for paired-end library number <#> (<#> = 1,2,..,9;  = fr, rf, ff)
--s<#>                file with unpaired reads for single reads library number <#> (<#> = 1,2,..,9)
--mp<#>-12            file with interlaced reads for mate-pair library number <#> (<#> = 1,2,..,9)
--mp<#>-1             file with forward reads for mate-pair library number <#> (<#> = 1,2,..,9)
--mp<#>-2             file with reverse reads for mate-pair library number <#> (<#> = 1,2,..,9)
--mp<#>-s             file with unpaired reads for mate-pair library number <#> (<#> = 1,2,..,9)
--mp<#>-    orientation of reads for mate-pair library number <#> (<#> = 1,2,..,9;  = fr, rf, ff)
--hqmp<#>-12          file with interlaced reads for high-quality mate-pair library number <#> (<#> = 1,2,..,9)
--hqmp<#>-1           file with forward reads for high-quality mate-pair library number <#> (<#> = 1,2,..,9)
--hqmp<#>-2           file with reverse reads for high-quality mate-pair library number <#> (<#> = 1,2,..,9)
--hqmp<#>-s           file with unpaired reads for high-quality mate-pair library number <#> (<#> = 1,2,..,9)
--hqmp<#>-  orientation of reads for high-quality mate-pair library number <#> (<#> = 1,2,..,9;  = fr, rf, ff)
--nxmate<#>-1         file with forward reads for Lucigen NxMate library number <#> (<#> = 1,2,..,9)
--nxmate<#>-2         file with reverse reads for Lucigen NxMate library number <#> (<#> = 1,2,..,9)
--sanger              file with Sanger reads
--pacbio              file with PacBio reads
--nanopore            file with Nanopore reads
--tslr        file with TSLR-contigs
--trusted-contigs             file with trusted contigs
--untrusted-contigs           file with untrusted contigs

Pipeline options:
--only-error-correction runs only read error correction (without assembling)
--only-assembler        runs only assembling (without read error correction)
--careful               tries to reduce number of mismatches and short indels
--continue              continue run from the last available check-point
--restart-from      restart run with updated options and from the specified check-point ('ec', 'as', 'k', 'mc')
--disable-gzip-output   forces error correction not to compress the corrected reads
--disable-rr            disables repeat resolution stage of assembling

Advanced options:
--dataset             file with dataset description in YAML format
-t/--threads               number of threads
                                [default: 16]
-m/--memory                RAM limit for SPAdes in Gb (terminates if exceeded)
                                [default: 250]
--tmp-dir              directory for temporary files
                                [default: /tmp]
-k                 comma-separated list of k-mer sizes (must be odd and
                                less than 128) [default: 'auto']
--cov-cutoff             coverage cutoff value (a positive float number, or 'auto', or 'off') [default: 'off']
--phred-offset  <33 or 64>      PHRED quality offset in the input reads (33 or 64)
                                [default: auto-detect]

As you can see this is also a “pipeline” of tools that can be switched on or off. SPAdes takes quite a long time, so for the purposes of this practical, something like this may suffice:

spades.py -t 4 \
          -m 32 \
          -k 31,51,71 \
          --only-assembler \
          -1 miseq.1.fastq -2 miseq.2.fastq \
          --nanopore minion.fastq \
          -o hybrid_assembly

In turn, these parameters mean

use 4 threads
max memory is 32Gb
use 3 kmer values to build the de bruijn graph(s) - 31, 51 and 71
only run the assembler, not the correction algorithm (for speed)
read 1 and read 2 of the MiSeq data
the nanopore data
put the output in folder “hybrid_assembly”

COPE: an accurate k-mer-based pair-end reads connection tool to facilitate genome assembly

Jit — Wed, 06 Dec 2017 02:08:14 -0600

An efficient tool called Connecting Overlapped Pair-End (COPE) reads, to connect overlapping pair-end reads using k-mer frequencies. We evaluated our tool on 30× simulated pair-end reads from Arabidopsis thaliana with 1% base error. COPE connected over 99% of reads with 98.8% accuracy, which is, respectively, 10 and 2% higher than the recently published tool FLASH. When COPE is applied to real reads for genome assembly, the resulting contigs are found to have fewer errors and give a 14-fold improvement in the N50 measurement when compared with the contigs produced using unconnected reads.

Address of the bookmark: ftp://ftp.genomics.org.cn/pub/cope

Genomics and Personalized Medicine

Sun, 01 Jun 2014 23:38:42 -0500

(October 20, 2009) Michael Snyder, Professor of Genetics and Chair of the Department of Genetics at Stanford, discusses advances in gene sequencing, the impact of genomics on medicine, the potential for personalized medicine. and efforts at Stanford to further study these issues. Stanford Mini Med School is a series arranged and directed by Stanford's School of Medicine, and presented by the Stanford Continuing Studies program. Featuring more than thirty distinguished, faculty, scientists and physicians from Stanford's medical school, the series offers students a dynamic introduction to the world of human biology, health and disease, and the groundbreaking changes taking place in medical research and health care. Stanford University http://www.stanford.edu Stanford University School of Medicine http://med.stanford.edu Stanford Continuing Studies http://continuingstudies.stanford.edu Stanford University Channel on YouTube: http://www.youtube.com/stanford

Tools for bacterial whole genome annotation

Radha Agarkar — Sat, 16 Dec 2017 17:37:47 -0600

RAST – Web tool (upload contigs), uses the subsystems in the SEED database and provides detailed annotation and pathway analysis. Takes several hours per genome but I think this is the best way to get a high quality annotation (if you have only a few genomes to annotate).

Prokka – Standalone command line tool, takes just a few minutes per genome. This is the best way to get good quality annotation in a flash, which is particularly useful if you have loads of genomes or need to annotate a pangenome or metagenome. Note however that the quality of functional information is not as good as RAST, and you will need several extra steps if you want to do functional profiling and pathway analysis of your genome(s)… which is in-built in RAST.

NCBI Prokaryotic Genome Annotation Pipeline is designed to annotate bacterial and archaeal genomes (chromosomes and plasmids).

Genome annotation is a multi-level process that includes prediction of protein-coding genes, as well as other functional genome units such as structural RNAs, tRNAs, small RNAs, pseudogenes, control regions, direct and inverted repeats, insertion sequences, transposons and other mobile elements.

PGAP: NCBI has developed an automatic prokaryotic genome annotation pipeline that combines ab initio gene prediction algorithms with homology based methods. The first version of NCBI Prokaryotic Genome Automatic Annotation Pipeline (PGAAP; see Pubmed Article) developed in 2005 has been replaced with an upgraded version that is capable of processing a larger data volume. NCBI's annotation pipeline depends on several internal databases and is not currently available for download or use outside of the NCBI environment.

BEACON (automated tool for Bacterial GEnome Annotation ComparisON), a fast tool for an automated and a systematic comparison of different annotations of single genomes. The extended annotation assigns putative functions to many genes with unknown functions. BEACON is available under GNU General Public License version 3.0 and is accessible at: http://www.cbrc.kaust.edu.sa/BEACON/.

BlastKOLA: Assigns K numbers to the user's sequence data by BLAST searches, respectively, against a nonredundant set of KEGG GENES. KOALA (KEGG Orthology And Links Annotation) is KEGG's internal annotation tool for K number assignment of KEGG GENES using SSEARCH computation. Annotate Sequence in KEGG Mapper and Pathogen Checker in KEGG Pathogen are special interfaces to this server and can be executed in an interactive mode. BlastKOALA is suitable for annotating fully sequenced genomes.

PAGIT: Provides a toolkit for improving the quality of genome assemblies created via an assembly software. PAGIT compiled four tools: (i) ABACAS which classifies and orientates contigs and estimates the sizes of gaps between them; (ii) IMAGE uses paired-end reads to extend contigs and close gaps within the scaffolds; (iii) ICORN for identifying and correcting small errors in consensus sequences and; (iv) RATT for help annotation. The software was mainly created to analyze parasite genomes of up to about 300 Mb.

MAKER: A portable and easily configurable genome annotation pipeline. MAKER allows smaller eukaryotic and prokaryotic genome projects to independently annotate their genomes and to create genome databases. It identifies repeats, aligns ESTs and proteins to a genome, produces ab-initio gene predictions and automatically synthesizes these data into gene annotations having evidence-based quality values. MAKER's inputs are minimal and its ouputs can be directly loaded into a Generic Model Organism Database (GMOD). They can also be viewed in the Apollo genome browser; this feature of MAKER provides an easy means to annotate, view and edit individual contigs and BACs without the overhead of a database. MAKER is available for download and can be tested online via the MAKER Web Annotation Service (MWAS).

MyPro is a software pipeline for high-quality prokaryotic genome assembly and annotation. It was validated on 18 oral streptococcal strains to produce submission-ready, annotated draft genomes. MyPro installed as a virtual machine and supported by updated databases will enable biologists to perform quality prokaryotic genome assembly and annotation with ease.

Adhoc Bioinformatics Faculty Position @ NIT

Tue, 03 Jun 2014 16:19:52 -0500

NATIONAL INSTITUTE OF TECHNOLOGY, DEPARTMENT OF BIOTECHNOLOGY, WARANGAL – 506 021, Andhra Pradesh

No.NITW/BT/2014/adhoc

APPLICATIONS ARE INVITED FOR THE APPOINTMENT OF ADHOC FACULTY ON CONTRACT BASIS IN THE DEAPARTMENT OF BIOTECHNOLOGY

Period of Contract: Initially the appointment is for one semester i.e., from July 2014 up to December 2014 only.

Essential Qualifications:

i) B. Tech or equivalent in Biotechnology/ Industrial Biotechnology/ Biochemical Engineering / Chemical Engg. Or M. Sc in Microbiology/ Botany/ Zoology/ Biochemistry/Biotechnology and ii) M. Tech or equivalent in Biotechnology/Industrial Biotechnology/Bioinformatics

Integrated M. Tech in Biotechnology/Industrial Biotechnology/ Bioinformatics

Candidates must possess First class (60% aggregate marks or 6.5 CGPA) at B. Tech/ M. Sc and M. Tech.

Desirable: Ph. D Pay Package: All selected candidates shall be eligible for a consolidated pay of Rs.30, 000/- per month. Candidates with Ph. D shall be eligible for an additional amount of Rs.5, 000/- per month.

How to apply : Applications on plain paper with attested photocopies of certificate and bio data along with justification for eligibility should reach to the Head, Department of Biotechnology, National Institute of Technology, Warangal AP 506004 in the form of soft or hard copy on or before 21st June 2014 email : biotech_hod@nitw.ac.in

Intimation: No separate call letters will be sent to the candidates. All the eligible candidates will be notified in the institute web site on 23rd June 2014. All the eligible candidates are requested to report for the interview to the Head, Department of Biotechnology at 9:00 AM on 27th June 2014

Joining: Selected candidates will be informed and they are expected to join immediately.

http://www.nitw.ac.in/nitw/announcements/2014/Bio-Adhoc%20Advt.%20May-2014.pdf

Magic-BLAST: a tool for mapping large next-generation RNA or DNA sequencing runs against a whole genome or transcriptome.

Jit — Tue, 26 Dec 2017 22:23:39 -0600

Magic-BLAST is a tool for mapping large next-generation RNA or DNA sequencing runs against a whole genome or transcriptome. Each alignment optimizes a composite score, taking into account simultaneously the two reads of a pair, and in case of RNA-seq, locating the candidate introns and adding up the score of all exons. This is very different from other versions of BLAST, where each exon is scored as a separate hit and read-pairing is ignored.

Magic-BLAST incorporates within the NCBI BLAST code framework ideas developed in the NCBI Magic pipeline, in particular hit extensions by local walk and jump (http://www.ncbi.nlm.nih.gov/pubmed/26109056), and recursive clipping of mismatches near the edges of the reads, which avoids accumulating artefactual mismatches near splice sites and is needed to distinguish short indels from substitutions near the edges.

Address of the bookmark: https://ncbi.github.io/magicblast/

Search Shell Command History

Rahul Nayak — Thu, 12 Jun 2014 17:43:34 -0500

We use couple of hundreads of command in daily basis. Most of them are actually repeated several time. The question remain open how do I search old command history under bash shell and modify or reuse it?

Now a days almost all modern shell allows you to search command history if enabled by user. Use history command to display the history list with line numbers. Lines listed with with a * have been modified by user.

Shell history search command

Type history at a shell prompt:
$ history

It will display the list of all used commandline history with an serial number.

To search particular command, enter:
$ history | grep command-name
$ history | egrep -i 'scp|ssh|ftp'
Emacs Line-Edit Mode Command History Searching

To get previous command containing string, hit [CTRL]+[r] followed by search string:

(reverse-i-search):

To get previous command, hit [CTRL]+[p]. You can also use up arrow key.

CTRL-p

To get next command, hit [CTRL]+[n]. You can also use down arrow key.

CTRL-n

fc command

Apart from hostory command there are fc command to extract the command from history. The fc stands for either "find command" or "fix command.

For example list last 10 command, enter:
$ fc -l 10
To list commands 130 through 150, enter:
$ fc -l 130 150
To list all commands since the last command beginning with ssh, enter:
$ fc -l ssh
You can edit commands 1 through 5 using vi text editor, enter:
$ fc -e vi 1 5

Delete command history

The -c option causes the history list to be cleared by deleting all of the entries:
$ history -c

List of visualization tools for genome alignments

Rahul Nayak — Fri, 02 Feb 2018 13:25:33 -0600

Genome browsers are useful not only for showing final results but also for improving analysis protocols, testing data quality, and generating result drafts. Its integration in analysis pipelines allows the optimization of parameters, which leads to better results. But sometime, we need publication ready figure of genomes. Following are the list of genome alignment visualization tools, which could be useful for analysis and interpretation of results:

ABySS Explorer

Interactive Java application that uses a novel graph-based representation to display a sequence assembly and associated metadata

http://www.bcgsc.ca/platform/bioinfo/software/abyss-explorer

BamView

Genome browser and annotation tool that allows visualization of sequence features, next-generation sequencing (NGS) data and the results of analyses within the context of the sequence, and also its six-frame translation

http://www.sanger.ac.uk/resources/software/artemis/

DNannotator

Annotation web toolkit for regional genomic sequences

http://bioapp.psych.uic.edu/DNannotator.htm

JVM

Java Visual Mapping tool for NGS reads

http://www.springer.com/cda/content/document/cda_downloaddocument/9789401792448-c2.pdf?SGWID=0-0-45-1487072-p176815501

LookSeq

Web-based visualization of sequences derived from multiple sequencing technologies. Low- or high-depth read pileups and easy visualization of putative single nucleotide and structural variation

http://lookseq.sourceforge.net

MagicViewer

Visualization of short read alignment, identification of genetic variation and association with annotation information of a reference genome

http://bioinformatics.zj.cn/magicviewer/

MapView

Alignments of huge-scale single-end and pair-end short reads

http://omictools.com/mapview-s1367.html

MultiPipMaker

Computes alignments of similar regions in two DNA sequences. The resulting alignments are summarized with a ‘percent identity plot’ (pip)

http://pipmaker.bx.psu.edu/pipmaker/

PileLineGUI

Handling genome position files in NGS studies

http://sing.ei.uvigo.es/pileline/pilelinegui.html

SAMtools tview

Simple and fast text alignment viewer; NGS compatible

http://www.htslib.org/

SEWAL

Uses a locality-sensitive hashing algorithm to enumerate all unique sequences in an entire Illumina sequencing run

http://www.sourceforge.net/projects/sewal

STAR

A web-based integrated solution to management and visualization of sequencing data

http://wanglab.ucsd.edu/star/browser

SVA

Software for annotating and visualizing sequenced human genomes

http://www.svaproject.org

Viewer (IGV)

Visualization of large heterogeneous datasets, providing a smooth and intuitive user experience at all levels of genome resolution

https://www.broadinstitute.org/igv/

ZOOM Lite

NGS data mapping and visualization software

http://bioinfor.com/zoom/lite/

Bioinformatician’s Pocket Reference !!

RAJESH DETROJA — Sun, 08 Jun 2014 09:56:58 -0500

It is amusing how brain of bioinformaticians work! Learning a new programming language for days feels so much of fun that making 5 minute discussion with neighbours (unless under special circumstances!) in our own mother-tongue. Today every bioinformatician keeps more than few languages and core IT toolkits on their plate. It has become mandatory to be able to mould different code snippets to build our own custom workflows, and thus keeping syntax at our fingertips has become essential.Although Google is best way to get syntax problem solved, it is not a bad idea to keep reference sheets is our smartphones or stick out some printed sheets on the back of your door, in the old fashion way!!

Address of the bookmark: http://infoplatter.wordpress.com/2014/04/06/bioinformaticians-pocket-reference/