BOL: Related items

Project Associate-I | Project Associate-II | Senior Project Associate @ IGIB

Thu, 05 Aug 2021 16:11:32 -0500

Experience in Next Generation Sequencing (NGS) application and interest in Genomics/ Clinical / Translational Applications. OR Good computational programming skills and deep interest in working on interface of Genomics and Clinical application.

Project Scientist-I
Experimental / Computation analysis experience in highthroughput genomics/ clinical application.

Project Manager
Experience in handling large biological projects involving high-throughput genomics/ clinical application.

Scientific Administrative Assistant
Lab Work.

More at https://vinodscaria.genomes.in/positionsopen

My commonly used commands in Bioinformatics

Rahul Nayak — Thu, 26 Jul 2018 04:58:45 -0500

FYI, I've found it useful to use MUMmer to extract the specific changes that Racon makes, so I can evaluate them individually:

minimap -t 24 assembly.fasta long_reads.fastq.gz | racon -t 24 long_reads.fastq.gz - assembly.fasta racon_assembly.fasta
nucmer -p nucmer assembly.fasta racon_assembly.fasta
show-snps -C -T -r nucmer.delta

This reports Racon's changes in a table. You can exclude indels with the -I option in show-snps.

This process (Racon -> MUMmer -> SNP table) solves the problem I originally raised in this issue. So as far as I'm concerned, you can close this issue (or keep it open if you still want to implement some kind of variant table).

Referee: Genome assembly quality scores

Jit — Sun, 04 Nov 2018 16:44:30 -0600

Modern genome sequencing technologies provide a succint measure of quality at each position in every read, however all of this information is lost in the assembly process. Referee summarizes the quality information from the reads that map to a site in an assembled genome to calculate a quality score for each position in the genome assembly.

We accomplish this by first calculating genotype likelihoods for every site. For a given site in a diploid genome, there are 10 possible genotypes (AA, AC, AG, AT, CC, CG, CT, GG, GT, TT). Referee takes as input the genotype likelihoods calculated for all 10 genotypes given the called reference base at each position.

Referee is a program to calculate a quality score for every position in a genome assembly. This allows for easy filtering of low quality sites for any downstream analysis.

https://github.com/gwct/referee

Address of the bookmark: https://gwct.github.io/referee/#

jackalope: A swift, versatile phylogenomic and high-throughput sequencing simulator

Abhimanyu Singh — Fri, 26 Jul 2019 00:58:12 -0500

jackalope simply and efficiently simulates (i) variants from reference genomes and (ii) reads from both Illumina and Pacific Biosciences (PacBio) platforms. It can either read reference genomes from FASTA files or simulate new ones. Genomic variants can be simulated using summary statistics, phylogenies, Variant Call Format (VCF) files, and coalescent simulations—the latter of which can include selection, recombination, and demographic fluctuations. jackalope can simulate single, paired-end, or mate-pair Illumina reads, as well as reads from Pacific Biosciences These simulations include sequencing errors, mapping qualities, multiplexing, and optical/PCR duplicates. All outputs can be written to standard file formats.

A swift, versatile phylogenomic and high-throughput sequencing simulator https://jackalope.lucasnell.com

Address of the bookmark: https://github.com/lucasnell/jackalope

Kevler: Reference-free variant discovery in large eukaryotic genomes

Jit — Tue, 28 Jan 2020 03:21:53 -0600

Welcome to kevlar, software for predicting de novo genetic variants without mapping reads to a reference genome! kevlar's k-mer abundance based method calls single nucleotide variants (SNVs), multinucleotide variants (MNVs), insertion/deletion variants (indels), and structural variants (SVs) simultaneously with a single simple model.

More at https://kevlar.readthedocs.io/en/latest/

https://www.cell.com/iscience/pdf/S2589-0042(19)30259-7.pdf

Address of the bookmark: https://github.com/kevlar-dev/kevlar

GenXPro GmbH

Rahul Agarwal — Thu, 22 May 2014 07:18:35 -0500

GenXPro GMbH is service provider for entire spectrum of nucleotide-based information of any biological sample. By combining intelligent data reduction techniques and latest next generation sequencing technologies, our service portfolio provides most accurate and cost efficient solutions for transcriptomic-, genomic- or epigenomic research.

GENXPRO GMBH, ALTENHÖFERALLEE 3, 60438 FRANKFURT MAIN, GERMANY

Website: http://www.genxpro.info/products_and_services/

PHONE: +49 (0)69- 95 73 97 10, FAX: +49 (0)69- 95 73 97 06

EMAIL: info@genxpro.de

miniasm: very fast OLC-based de novo assembler for noisy long reads

Jit — Mon, 27 Nov 2017 07:58:49 -0600

Miniasm is a very fast OLC-based de novo assembler for noisy long reads. It takes all-vs-all read self-mappings (typically by minimap) as input and outputs an assembly graph in the GFA format. Different from mainstream assemblers, miniasm does not have a consensus step. It simply concatenates pieces of read sequences to generate the final unitig sequences. Thus the per-base error rate is similar to the raw input reads.

So far miniasm is in early development stage. It has only been tested on a dozen of PacBio and Oxford Nanopore (ONT) bacterial data sets. Including the mapping step, it takes about 3 minutes to assemble a bacterial genome. Under the default setting, miniasm assembles 9 out of 12 PacBio datasets and 3 out of 4 ONT datasets into a single contig. The 12 PacBio data sets are PacBio E. coli sample, ERS473430, ERS544009, ERS554120, ERS605484, ERS617393, ERS646601, ERS659581, ERS670327, ERS685285, ERS743109 and a deprecated PacBio E. coli data set. ONT data are acquired from the Loman Lab.

For a C. elegans PacBio data set (only 40X are used, not the whole dataset), miniasm finishes the assembly, including reads overlapping, in ~10 minutes with 16 CPUs. The total assembly size is 105Mb; the N50 is 1.94Mb. In comparison, the HGAP3produces a 104Mb assembly with N50 1.61Mb. This dotter plot gives a global view of the miniasm assembly (on the X axis) and the HGAP3 assembly (on Y). They are broadly comparable. Of course, the HGAP3 consensus sequences are much more accurate. In addition, on the whole data set (assembled in ~30 min), the miniasm N50 is reduced to 1.79Mb. Miniasm still needs improvements.

Miniasm confirms that at least for high-coverage bacterial genomes, it is possible to generate long contigs from raw PacBio or ONT reads without error correction. It also shows that minimap can be used as a read overlapper, even though it is probably not as sensitive as the more sophisticated overlapers such as MHAP and DALIGNER. Coupled with long-read error correctors and consensus tools, miniasm may also be useful to produce high-quality assemblies.

Minimap and miniasm are ultrafast tools for (i) mapping and (ii) assembly. Designed for long, noisy reads, they do not have a correction or consensus step, and therefore the resulting assemblies are contiguous (i.e. long) but very noisy (i.e. full of errors)

We start with an all against all comparison:

minimap -Sw5 -L100 -m0 -t8 reads.fq reads.fq | gzip -1 > reads.paf.gz

Then we can assemble

miniasm -f reads.fq reads.paf.gz > reads.gfa

Convert GFA to FASTA:

awk '/^S/{print ">"$2"\n"$3}' reads.gfa | fold > reads.fa

And then count how many contigs:

grep ">" reads.fa | wc -l

# Download sample PacBio from the PBcR website
wget -O- http://www.cbcb.umd.edu/software/PBcR/data/selfSampleData.tar.gz | tar zxf -
ln -s selfSampleData/pacbio_filtered.fastq reads.fq
# Install minimap and miniasm (requiring gcc and zlib)
git clone https://github.com/lh3/minimap && (cd minimap && make)
git clone https://github.com/lh3/miniasm && (cd miniasm && make)
# Overlap
minimap/minimap -Sw5 -L100 -m0 -t8 reads.fq reads.fq | gzip -1 > reads.paf.gz
# Layout
miniasm/miniasm -f reads.fq reads.paf.gz > reads.gfa

Address of the bookmark: https://github.com/lh3/miniasm

Run miniasm assembler on nanopore reads !

Jit — Mon, 18 Dec 2017 04:07:50 -0600

Find the detail of the reads repeats:

fq2fa ONT_A.fastq ONT_A.fasta

minimap2 -xava-ont ONT_A.fasta ONT_A.fasta -t10 -X > AONT.paf

awk '{if($1==$6){print}}' AONT.paf > AONTself.paf

awk '$5=="-"' AONTself.paf | awk '{print $1}'| sort|uniq > invertedrepeat.list

Generated a few palindrome and repeats plots (highlighting only repeats largest than 10, 20 and 30 kb)

minidot -f 5 -m 30000 AONTself.paf > AONTself30000.eps
sed 's/_template_pass_FAH31515//' AONTself30000.eps > AONTself30000final.eps

minidot -f 5 -m 20000 AONTself.paf > AONTself20000.eps
sed 's/_template_pass_FAH31515//' AONTself20000.eps > AONTself20000final.eps

minidot -f 5 -m 10000 AONTself.paf > AONTself10000.eps
sed 's/_template_pass_FAH31515//' AONTself10000.eps > AONTself10000final.eps

Assemble with miniasm:

miniasm -f ONT_A.fasta AONT.paf > AONT.gfa
grep '^S' AONT.gfa |awk '{print ">"$2"\n"$3}' > AONT_miniasm.fasta

minimap2 -xasm10 AONT_miniasm.fasta AONT_miniasm.fasta -t1 -X > AONT_miniasm.paf

awk '{if($1==$6){print}}' AONT_miniasm.paf > AONT_miniasm_self.paf

minidot -f 5 -m 10000 AONT_miniasm_self.paf > AONT_miniasm_self10000.eps

Njoy the assembly !

Flye: Fast and accurate de novo assembler for single molecule sequencing reads

Jit — Fri, 04 May 2018 19:16:22 -0500

Flye is a de novo assembler for long and noisy reads, such as those produced by PacBio and Oxford Nanopore Technologies. The algorithm uses an A-Bruijn graph to find the overlaps between reads and does not require them to be error-corrected. After the initial assembly, Flye performs an extra repeat classification and analysis step to improve the structural accuracy of the resulting sequence. The package also includes a polisher module, which produces the final assembly of high nucleotide-level quality.

Address of the bookmark: https://github.com/fenderglass/Flye

Frequent Paired-end reads (PE 2x100) mapping command lines

Jit — Tue, 15 May 2018 08:59:29 -0500

bowtie2 -x hs37m -X 650 -q -1 r1.fq -2 r2.fq -S r12.bowtie2.sam

bwa aln hs37m.fa r1.fq > r1.sai && bwa aln hs37m.fa r2.fq > r2.sai \
&& bwa sampe hs37m r1.sai r2.sai r1.fq r2.fq > r12.bwa.sam

bwa bwasw ../index/bwa/hs37m.fa r12.fq > r12.bwasw.sam

gsnap -A sam -d hs37m r1.fq r2.fq > r12.gsnap.sam

novoalign -r Random -o SAM -f r1.fq r2.fq -i 500 50 -d hs37m-k14s3.novo > r12.novo.sam

smalt map -f samsoft -i 650 -o r12.smalt-k20s13.sam hs37m-k20s13 r1.fq r2.fq

stampy.py -g hs37m -h hs37m -o r12.stampy.sam -M r1.fq,r2.fq

soap -D hs37m.fa.index -a r1.fq -b r2.fq -l 32 -g 3 -u dummy -2 dummy -o r12.soap