BOL: Related items

miniasm: very fast OLC-based de novo assembler for noisy long reads

Jit — Mon, 27 Nov 2017 07:58:49 -0600

Miniasm is a very fast OLC-based de novo assembler for noisy long reads. It takes all-vs-all read self-mappings (typically by minimap) as input and outputs an assembly graph in the GFA format. Different from mainstream assemblers, miniasm does not have a consensus step. It simply concatenates pieces of read sequences to generate the final unitig sequences. Thus the per-base error rate is similar to the raw input reads.

So far miniasm is in early development stage. It has only been tested on a dozen of PacBio and Oxford Nanopore (ONT) bacterial data sets. Including the mapping step, it takes about 3 minutes to assemble a bacterial genome. Under the default setting, miniasm assembles 9 out of 12 PacBio datasets and 3 out of 4 ONT datasets into a single contig. The 12 PacBio data sets are PacBio E. coli sample, ERS473430, ERS544009, ERS554120, ERS605484, ERS617393, ERS646601, ERS659581, ERS670327, ERS685285, ERS743109 and a deprecated PacBio E. coli data set. ONT data are acquired from the Loman Lab.

For a C. elegans PacBio data set (only 40X are used, not the whole dataset), miniasm finishes the assembly, including reads overlapping, in ~10 minutes with 16 CPUs. The total assembly size is 105Mb; the N50 is 1.94Mb. In comparison, the HGAP3produces a 104Mb assembly with N50 1.61Mb. This dotter plot gives a global view of the miniasm assembly (on the X axis) and the HGAP3 assembly (on Y). They are broadly comparable. Of course, the HGAP3 consensus sequences are much more accurate. In addition, on the whole data set (assembled in ~30 min), the miniasm N50 is reduced to 1.79Mb. Miniasm still needs improvements.

Miniasm confirms that at least for high-coverage bacterial genomes, it is possible to generate long contigs from raw PacBio or ONT reads without error correction. It also shows that minimap can be used as a read overlapper, even though it is probably not as sensitive as the more sophisticated overlapers such as MHAP and DALIGNER. Coupled with long-read error correctors and consensus tools, miniasm may also be useful to produce high-quality assemblies.

Minimap and miniasm are ultrafast tools for (i) mapping and (ii) assembly. Designed for long, noisy reads, they do not have a correction or consensus step, and therefore the resulting assemblies are contiguous (i.e. long) but very noisy (i.e. full of errors)

We start with an all against all comparison:

minimap -Sw5 -L100 -m0 -t8 reads.fq reads.fq | gzip -1 > reads.paf.gz

Then we can assemble

miniasm -f reads.fq reads.paf.gz > reads.gfa

Convert GFA to FASTA:

awk '/^S/{print ">"$2"\n"$3}' reads.gfa | fold > reads.fa

And then count how many contigs:

grep ">" reads.fa | wc -l

# Download sample PacBio from the PBcR website
wget -O- http://www.cbcb.umd.edu/software/PBcR/data/selfSampleData.tar.gz | tar zxf -
ln -s selfSampleData/pacbio_filtered.fastq reads.fq
# Install minimap and miniasm (requiring gcc and zlib)
git clone https://github.com/lh3/minimap && (cd minimap && make)
git clone https://github.com/lh3/miniasm && (cd miniasm && make)
# Overlap
minimap/minimap -Sw5 -L100 -m0 -t8 reads.fq reads.fq | gzip -1 > reads.paf.gz
# Layout
miniasm/miniasm -f reads.fq reads.paf.gz > reads.gfa

Address of the bookmark: https://github.com/lh3/miniasm

Run miniasm assembler on nanopore reads !

Jit — Mon, 18 Dec 2017 04:07:50 -0600

Find the detail of the reads repeats:

fq2fa ONT_A.fastq ONT_A.fasta

minimap2 -xava-ont ONT_A.fasta ONT_A.fasta -t10 -X > AONT.paf

awk '{if($1==$6){print}}' AONT.paf > AONTself.paf

awk '$5=="-"' AONTself.paf | awk '{print $1}'| sort|uniq > invertedrepeat.list

Generated a few palindrome and repeats plots (highlighting only repeats largest than 10, 20 and 30 kb)

minidot -f 5 -m 30000 AONTself.paf > AONTself30000.eps
sed 's/_template_pass_FAH31515//' AONTself30000.eps > AONTself30000final.eps

minidot -f 5 -m 20000 AONTself.paf > AONTself20000.eps
sed 's/_template_pass_FAH31515//' AONTself20000.eps > AONTself20000final.eps

minidot -f 5 -m 10000 AONTself.paf > AONTself10000.eps
sed 's/_template_pass_FAH31515//' AONTself10000.eps > AONTself10000final.eps

Assemble with miniasm:

miniasm -f ONT_A.fasta AONT.paf > AONT.gfa
grep '^S' AONT.gfa |awk '{print ">"$2"\n"$3}' > AONT_miniasm.fasta

minimap2 -xasm10 AONT_miniasm.fasta AONT_miniasm.fasta -t1 -X > AONT_miniasm.paf

awk '{if($1==$6){print}}' AONT_miniasm.paf > AONT_miniasm_self.paf

minidot -f 5 -m 10000 AONT_miniasm_self.paf > AONT_miniasm_self10000.eps

Njoy the assembly !

Flye: Fast and accurate de novo assembler for single molecule sequencing reads

Jit — Fri, 04 May 2018 19:16:22 -0500

Flye is a de novo assembler for long and noisy reads, such as those produced by PacBio and Oxford Nanopore Technologies. The algorithm uses an A-Bruijn graph to find the overlaps between reads and does not require them to be error-corrected. After the initial assembly, Flye performs an extra repeat classification and analysis step to improve the structural accuracy of the resulting sequence. The package also includes a polisher module, which produces the final assembly of high nucleotide-level quality.

Address of the bookmark: https://github.com/fenderglass/Flye

Frequent Paired-end reads (PE 2x100) mapping command lines

Jit — Tue, 15 May 2018 08:59:29 -0500

bowtie2 -x hs37m -X 650 -q -1 r1.fq -2 r2.fq -S r12.bowtie2.sam

bwa aln hs37m.fa r1.fq > r1.sai && bwa aln hs37m.fa r2.fq > r2.sai \
&& bwa sampe hs37m r1.sai r2.sai r1.fq r2.fq > r12.bwa.sam

bwa bwasw ../index/bwa/hs37m.fa r12.fq > r12.bwasw.sam

gsnap -A sam -d hs37m r1.fq r2.fq > r12.gsnap.sam

novoalign -r Random -o SAM -f r1.fq r2.fq -i 500 50 -d hs37m-k14s3.novo > r12.novo.sam

smalt map -f samsoft -i 650 -o r12.smalt-k20s13.sam hs37m-k20s13 r1.fq r2.fq

stampy.py -g hs37m -h hs37m -o r12.stampy.sam -M r1.fq,r2.fq

soap -D hs37m.fa.index -a r1.fq -b r2.fq -l 32 -g 3 -u dummy -2 dummy -o r12.soap

GenomeMapper: Simultaneous alignment of short reads against multiple genomes

Jit — Fri, 25 May 2018 09:29:44 -0500

GenomeMapper is a short read mapping tool designed for accurate read alignments. It quickly aligns millions of reads either with ungapped or gapped alignments. It can be used to align against multiple genomes simulanteously or against a single reference. If you are unsure which one is the appropriate GenomeMapper, you might want to use the latter https://www.ncbi.nlm.nih.gov/pmc/articles/PMC2768987/

Address of the bookmark: http://1001genomes.org/software/genomemapper.html

JRF/SRF at Jawaharlal Nehru Institute ofAdvanced Studies (JNIAS), Hyderabad

Fri, 31 Oct 2014 08:48:23 -0500

Applications for Academic Projects in Biotechnology, Bioinformatics, Environmental Sciences and Computer Science & Engineering

About JNIAS
Jawaharlal Nehru Institute of Advanced Studies (JNIAS), Hyderabad has been established by Dr. D. Swaminadhan Research Foundation (DSRF), Hyderabad as a Research and Educational Institution with a view to contribute in developing advanced technologies and build „core competence‟ in specific areas. The activities of JNIAS involves: Education, Research Training and Innovations in the fields of Sciences, Technologies, Humanities and Social Sciences. It aims to blossom into an Advanced Institute of education and research with a reservoir of expertise and experience in the relevant fields and the necessary capability to harness multi-disciplinary research and studies. JNIAS has been recognized as an Advanced Research Institute by Jawaharlal Nehru Technological University Hyderabad (JNTUH), Hyderabad and Jawaharlal Nehru Technological University Anantapur (JNTUA), for offering Ph.D., P.G M.Phil, P.G Diploma and Training Programmes in Sciences and Engineering & Technology.

Jawaharlal Nehru Architecture and Fine Arts University (JNAFAU) Hyderabad also recognized JNIAS for offering UG, PG degree in Architecture.

Projects & Facilities

JNIAS offers wide range of projects:

Biotechnology area:

Molecular Biology
Microbiology
Nanotechnology
Bioinformatics (Schrodinger Software)
In Silico studies & Drug Designing
Sequence analysis
Protein structure function studies

Registration
Tuition Fees: Interested students need to pay the following tuition fees:
1. Six Month’s Project: Rs. 20,000/-
2. Four Month’s Project: Rs. 15,000/-
3. Three Month’s Project: Rs. 10,000/-
4. One Month - Hands on Training : Rs. 8,000/-

For enquires call:
91-7893203414 (Biotechnology), 91-9949582263 (Environmental Sciences) 91-8977369305 (Computer Science)

Interested student may download the application from the website (www.jnias.in) and send the hard copy of the completed application forms and Curriculum Vitae along with the Demand Draft drawn on any nationalized Banks in favor of “The Registrar, JNIAS, Secunderabad”. Application forms can be sent through email to academicprojects@jnias.in

Address
Jawaharlal Nehru Institute of Advanced Studies (JNIAS)
6th Floor, Buddha Bhavan, M.G Road,
Secunderabad - 500 003
Andhra Pradesh, India
Tele/Fax: 040- 27541551; 27541553
Mobile: 08885541554
Web site: www.jnias.in

Brochure : https://drive.google.com/file/d/0B3zPwhgA-u-nU0dyMFd2OWcxNUpSTWNYc0xDSGs5UDI4UDNB/view?usp=sharing

npScarf: real-time scaffolder using SPAdes contigs and Nanopore sequencing reads

Shruti Paniwala — Mon, 11 Jun 2018 05:14:57 -0500

npScarf (jsa.np.npscarf) is a program that connect contigs from a draft genomes to generate sequences that are closer to finish. These pipelines can run on a single laptop for microbial datasets. In real-time mode, it can be integrated with simple structural analyses such as gene ordering, plasmid forming.

Address of the bookmark: http://japsa.readthedocs.io/en/latest/tools/jsa.np.npscarf.html

LR_Gapcloser: a tiling path-based gap closer that uses long reads to complete genome assembly

Rahul Nayak — Thu, 14 May 2020 15:09:52 -0500

LR_Gapcloser is a gap closing tool using long reads from studied species. The long reads could be downloaed from public read archive database (for instance, NCBI SRA database ) or be your own data. Then they are fragmented and aligned to scaffolds using BWA mem algorithm in BWA package. In the package, we provided a compiled bwa, so the user needn't to install bwa. LR_Gapcloser uses the alignments to find the bridging that cross the gap, and then fills the long read original sequence into the genomic gaps.

Address of the bookmark: https://github.com/CAFS-bioinformatics/LR_Gapcloser

SimLoRD: A read simulator for third generation sequencing reads

Aaryan Lokwani — Wed, 22 Aug 2018 10:40:27 -0500

SimLoRD is a read simulator for third generation sequencing reads and is currently focused on the Pacific Biosciences SMRT error model.

Reads are simulated from both strands of a provided or randomly generated reference sequence.

The reference can be read from a FASTA file or randomly generated with a given GC content. It can consist of several chromosomes, whose structure is respected when drawing reads. (Simulation of genome rearrangements may be incorporated at a later stage.)
The read lengths can be determined in four ways: drawing from a log-normal distribution (typical for genomic DNA), sampling from an existing FASTQ file (typical for RNA), sampling from a a text file with integers (RNA), or using a fixed length
Quality values and number of passes depend on fragment length.
Provided subread error probabilities are modified according to number of passes
Outputs reads in FASTQ format and alignments in SAM format

Address of the bookmark: https://bitbucket.org/genomeinformatics/simlord/

Celebrating Crystallography - An animated adventure

Fri, 31 Oct 2014 15:59:00 -0500

NEW: Now with French or Spanish subtitles (click on the 'Captions' icon to select). Plus... Watch the French language version here: https://www.youtube.com/watch?v=PvLu7BOsJhM X-ray crystallography is arguably one of the greatest innovations of the twentieth century, but not that many people know what it is or how it came about. Join us on an animated journey through the 100 year history of crystallography -- from the pioneering work of William and Lawrence Bragg in 1913 to the surface of Mars! Narrated by structural biologist Stephen Curry and produced by animation company 12foot6, the film explores the extraordinary history of crystallography. To date 28 Nobel Prizes have been awarded to projects related to the field and X-ray crystallography remains the foremost technique in determining the structures of a huge range of complex molecules. This film was produced in celebration of the Bragg Centenary and was funded by STFC. Watch more science videos on the amazing Ri Channel: http://richannel.org Watch more animations from 12foot6: http://12foot6.com/ The Ri is on Twitter: http://twitter.com/ri_science and Facebook: http://www.facebook.com/royalinstitution Subscribe for the latest science videos: http://richannel.org/newsletter