Faculty of Science

Essential Qualifications:

(i) Good academic record having at least 55% marks (or an equivalent grade in a point scale wherever grading system is followed) at the Master’s Degree level in a relevant subject, from an Indian University, or an equivalent degree from an accredited foreign University.

(II) Besides fulfilling the above qualifications, the candidates must have cleared the National Eligibility Test (NET) conducted by the UGC, CSIR or similar test accredited by the UGC like SLET/SET.

(III) Notwithstanding anything contained in sub-clauses (i) and (ii) of clause 4.4.1 of UGC regulations 2010, candidates, who are, or have been awarded a Ph.D. Degree in accordance with the University Grants Commission (Minimum Standards and Procedure for Award of Ph.D. Degree) Regulations, 2009, shall be exempted from the requirement of the minimum eligibility condition of NET/ SLET/ SET for engagement of guest Teacher.

(IV) NET/ SLET/ SET shall also not be required for such Master’s Degree Programmes in discipline for which NET/ SLET/ SET is not conducted.

Application form along with detailed instructions can be downloaded from Tripura University website: www.tripurauniv.in. The duly filled in application forms complete in all respects may be sent so as to reach the Office of the Deputy Registrar Academic Branch, Tripura University, Suryamaninagar - 799022, Tripura on or before 31st July, 2014. The Candidates who responded against advertisement No. TU.REG/N-Advt./02/10 dated 20.02.2014 need not apply again.

For more info visit: http://www.tripurauniv.in/images/universitymedia/EmploymentNotification/Guest%20Teacher%20Advt.%20website_09072014.pdf

No.of Posts:01 (SC)

Pay Scale:

Pay Band of Rs.15600-39100 + Rs.6000/- GP +NPA @ 25% of Basic Pay +Learning Resource Allowance @ Rs.20,000/-P.A.+ Conveyance Allowance @ Rs. 1650/-P.M.+ Academic Allowance @ Rs.2500/- P.M. and other admissible allowances.

Qualifications:

Area of Specialization:-

Bioinformatics/Computational/Biology/Genomics/ Proteomics/ Structural Biology

1. Postgraduate qualification, e.g. Master’s Degree in Biotechnology/Bioinformatics/ Biophysics.

2. A Doctorate Degree of recognized University/Institute in a basic or allied Medical Science subject e.g. Medical Biotechnology/Biophysics. Bioinformatics/X-ray Crystallography/

Immunology/Structural Biology etc

Experience:

1.Minimum three years teaching and/or research experience in a recognized medical/research Institution in an allied medical subject after obtaining doctorate degree and preferably in Medical

Molecular Biology/ Biophysics/Structural Biology/Genomics and Clinical Proteomics/Computational Biology.

2. Minimum two publication with atleast one in international journal and atleast one as first author

Desirable:-

Consistently excellent scholastic/academic record, demonstrated ability to write grant proposal/(s) successfully, Post Doctoral training in a frontier area of medical Bioinformatics Research and of direct relevance to clinical diagnosis or patient care (preferably from a recognized top-ranking medical institution abroad)

Send your applications to O/O, Deputy Registrar, Recruitment & Establishment Cell, University of Health Sciences, Rohtak by 08.7.2014

For more details,please visit website:http://pgimsrohtak.nic.in/2014%20AP%20Advt.pdf

1.Stupid for biologist: Biology is so complex that it will make bioinformatician feel stupid. There are no any universal fixed rules; it can surprise you any time. So be nice to biologists who ask questions and resolve your biological puzzles. Sometime you will have no idea what the hell you were doing either.

2.Puzzling why: Do not hesitate to ask question. Especially. at the beginning of project you will have to ask a lot of questions. Instead of puzzling it out at end check out and clear your doubt even for a single error. It may can leads to wrong conclusion.

3.Running marathon: The most of the biological software’s documentation is always incomplete. In other word they are no more than 95 percent complete. Sometime a single problem can halt your entire project for months. Compilation and running the pipelines in tedious because almost all are interdependent and need proper configuration. I face the same kind of problem with Evolver :( …

4.Folders missing: The pipelines generate lots of data, and we keep them in several folders for future use. But sometime we delete them by mistake and move to recovery…

5.Digging deeper: Digging deeper is fruitful, but some time it can be catastrophic. You may get frustrated or direction less. So keep a biologist with you for rescue …. Sometime an expert computer programmer to handle your server. Remember, the server will always go down when you need it the most.

The most common frustrating  common line: Why do we do this again?

• hist: Create an histogram of k-mer occurrences from a sequence file. Adds metadata in output for easy plotting.
• gcp: K-mer GC Processor. Creates a matrix of the number of K-mers found given a GC count and a K-mer count.
• comp: K-mer comparison tool. Creates a matrix of shared K-mers between two (or three) sequence files or hashes.
• sect: SEquence Coverage estimator Tool. Estimates the coverage of each sequence in a file using K-mers from another sequence file.
• blob: Given, reads and an assembly, calculates both the read and assembly K-mer coverage along with GC% for each sequence in the assembly.SEquence Coverage estimator Tool.
• filter: Filtering tools. Contains tools for filtering k-mer hashes and FastQ/A files:
  • kmer: Produces a k-mer hash containing only k-mers within specified coverage and GC tolerances.
  • seq: Filters a sequence file based on whether or not the sequences contain k-mers within a provided hash.
• plot: Plotting tools. Contains several plotting tools to visualise K-mer and compare distributions. The following plot tools are available:
  • density: Creates a density plot from a matrix created with the "comp" tool. Typically this is used to compare two K-mer hashes produced by different NGS reads.
  • profile: Creates a K-mer coverage plot for a single sequence. Takes in fasta coverage output coverage from the "sect" tool
  • spectra-cn: Creates a stacked histogram using a matrix created with the "comp" tool. Typically this is used to compare a jellyfish hash produced from a read set to a jellyfish hash produced from an assembly. The plot shows the amount of distinct K-mers absent, as well as the copy number variation present within the assembly.
  • spectra-hist: Creates a K-mer spectra plot for a set of K-mer histograms produced either by jellyfish-histo or kat-histo.
  • spectra-mx: Creates a K-mer spectra plot for a set of K-mer histograms that are derived from selected rows or columns in a matrix produced by the "comp".

In addition, KAT contains a python script for analysing the mathematical distributions present in the K-mer spectra in order to determine how much content is present in each peak.

This README only contains some brief details of how to install and use KAT. For more extensive documentation please visit: https://kat.readthedocs.org/en/latest/

https://academic.oup.com/bioinformatics/article/33/4/574/2664339 

Address of the bookmark: https://github.com/TGAC/KAT

The Bioinformatics and Systems Biology Unit of Université de Liège (Belgium) is looking for a highly motivated master student with programming skills for a PhD thesis project (4 years, fully funded) with the goal of designing computational tools that use literature, genomic and structural data in order to infer regulatory and metabolic networks.

Applicants are invited to send their resume and a recommendation letter to Prof. Patrick Meyer (more details at www.biosys.ulg.ac.be )

For more information : www.biosys.ulg.ac.be

minimap -t 24 assembly.fasta long_reads.fastq.gz | racon -t 24 long_reads.fastq.gz - assembly.fasta racon_assembly.fasta
nucmer -p nucmer assembly.fasta racon_assembly.fasta
show-snps -C -T -r nucmer.delta

This reports Racon's changes in a table. You can exclude indels with the -I option in show-snps. 

This process (Racon -> MUMmer -> SNP table) solves the problem I originally raised in this issue. So as far as I'm concerned, you can close this issue (or keep it open if you still want to implement some kind of variant table).

Summary: The application of protein–protein docking in large-scale interactome analysis is a major challenge in structural bioinformatics and requires huge computing resources. In this work, we present MEGADOCK 4.0, an FFT-based docking software that makes extensive use of recent heterogeneous supercomputers and shows powerful, scalable performance of over 97% strong scaling.

Availability and Implementation: MEGADOCK 4.0 is written in C++ with OpenMPI and NVIDIA CUDA 5.0 (or later) and is freely available to all academic and non-profit users at: http://www.bi.cs.titech.ac.jp/megadock.

Contact: akiyama@cs.titech.ac.jp

Address of the bookmark: http://bioinformatics.oxfordjournals.org/content/early/2014/08/06/bioinformatics.btu532.short

Source code, executables and the testing dataset are freely available at https://github.com/mapleforest/HaploMerger2/releases/.

Address of the bookmark: https://github.com/mapleforest/HaploMerger2/releases/