BOL: Related items

bipype

Jit — Thu, 01 Dec 2016 08:47:38 -0600

Bipype is a very useful program, which prepare a lot of types of bioinformatics analyses. There are three input options: amplicons, WGS (whole genome sequences) and metatranscriptomic data. If amplicons are input data, then bipype does reconstruction and pairs merging. After that biodiversity is searching. There are two types of searching depending on the amplicons types (ITS or 16S). If WGS are chosen, then bipype finds the SA coordinates of the input reads and generates alignments in the SAM format given single-end reads, aligns reads to reference sequence(s). All of these analyses will be shown with Krona program, which allows to show hierarchical data with pie charts.

Address of the bookmark: https://readthedocs.org/projects/bipype/

Minia

Jit — Thu, 08 Dec 2016 05:07:00 -0600

Minia is a short-read assembler based on a de Bruijn graph, capable of assembling a human genome on a desktop computer in a day. The output of Minia is a set of contigs. Minia produces results of similar contiguity and accuracy to other de Bruijn assemblers (e.g. Velvet).

Download

Minia 2.0.7 Linux 64-bits binaries (Source code) (Legacy codebase)

For the impatient

A typical Minia command line looks like:

./minia -in reads.fa -kmer-size 31 -abundance-min 3 -out output_prefix

Type

./minia

for a quick explanation of the parameters.

For more information, refer to the manual.

KmerGenie can be used to determine the best k-mer size, minimum abundance of correct k-mers, and genome size estimation for your dataset.

Address of the bookmark: http://minia.genouest.org/

Standardized velvet assembly report

Poonam Mahapatra — Fri, 09 Dec 2016 03:59:59 -0600

Requirements:

velvet (velveth velvetg should be in your PATH)
R (with Sweave)
pdflatex (usually part of TeTeX)
ggplot2 (from R prompt type install.packages("ggplot2","proto","xtable"))
Perl

Optional:

BLAT or BLAST (to generate alignments against a reference genome). If using BLAT, add faToTwoBit,gfClient,gfServer to your PATH. If using BLAST, add blastall and formatdb.

Edit permute.sh to your liking, paying particular attention to the kmer, cvCut, expCov, and other flags

To Run:

perl fastaAllSize mysequences.fa > mysequences.stat or gunzip -c mysequences.fa.gz | fastaAllSize > mysequences.stat Substitute fastqAllSize for fastq files.
./permute.sh mysequences (leave out the .fa)

https://github.com/leipzig/standardized-velvet-assembly-report

Address of the bookmark: https://github.com/leipzig/standardized-velvet-assembly-report

EAGER

Jit — Sat, 10 Dec 2016 18:07:23 -0600

The automated reconstruction of genome sequences in ancient genome analysis is a multifaceted process.

EAGER encompasses both state-of-the-art tools for each step as well as new complementary tools tailored for ancient DNA data within a single integrated solution in an easily accessible format.

https://genomebiology.biomedcentral.com/articles/10.1186/s13059-016-0918-z

Address of the bookmark: https://github.com/apeltzer/EAGER-GUI

GARM:Genome Assembly, Reconciliation and Merging

Jit — Mon, 19 Dec 2016 06:03:02 -0600

The pipeline is based mainly implemented using Perl scripts and modules and third-party open source software like the AMOS (Myers et al., 2000) and MUMmer (Kurtz et al., 2004) packages. The pipeline was tested on Debian, Ubuntu, Fedora and BioLinux distributions. The method merges contigs or scaffolds from different assemblers using the same or different sequencing technologies. When scaffolds are provided, a process of finding probable compressions or extensions (CE) problems in the assemblies can be per-formed; contigs are joined back into scaffolds after gap recalculation

Address of the bookmark: http://garm-meta-assem.sourceforge.net/

quickmerge: A simple and fast metassembler and assembly gap filler designed for long molecule based assemblies.

Jit — Mon, 19 Dec 2016 10:23:36 -0600

quickmerge uses a simple concept to improve contiguity of genome assemblies based on long molecule sequences, often with dramatic outcomes. The program uses information from assemblies made with illumina short reads and PacBio long reads to improve contiguities of an assembly generated with PacBio long reads alone. This is counterintuitive because illumina short reads are not typically considered to cover genomic regions which PacBio long reads cannot. Although we have not evaluated this program for assemblies generated with Oxford nanopore sequences, the program should work with ONP-assemblies too.

Address of the bookmark: https://github.com/mahulchak/quickmerge

MCscan

Bulbul — Thu, 22 Dec 2016 03:53:58 -0600

MCscan is a computer program that can simultaneously scan multiple genomes to identify homologous chromosomal regions and subsequently align these regions using genes as anchors. This is the toolset for generating the synteny correspondences in Plant Genome Duplication Database. It is intended as an easy-to-use and quick way to identify conserved gene arrays both within the same genome and across different genomes.

More at http://chibba.agtec.uga.edu/duplication/mcscan/

Address of the bookmark: http://chibba.agtec.uga.edu/duplication/mcscan/

MEME suite

Bulbul — Fri, 23 Dec 2016 08:49:55 -0600

Motif based sequence analysis suits

The MEME Suite allows the biologist to discover novel motifs in collections of unaligned nucleotide or protein sequences, and to perform a wide variety of other motif-based analyses.

The MEME Suite supports motif-based analysis of DNA, RNA and protein sequences. It provides motif discovery algorithms using both probabilistic (MEME) and discrete models (MEME), which have complementary strengths. It also allows discovery of motifs with arbitrary insertions and deletions (GLAM2). In addition to motif discovery, the MEME Suite provides tools for scanning sequences for matches to motifs (FIMO, MAST and GLAM2Scan), scanning for clusters of motifs (MCAST), comparing motifs to known motifs (Tomtom), finding preferred spacings between motifs (SpaMo), predicting the biological roles of motifs (GOMo), measuring the positional enrichment of sequences for known motifs (CentriMo), and analyzing ChIP-seq and other large datasets (MEME-ChIP).

The MEME Suite is comprised of a collection of tools that work together, as shown below. Not all the tools are available as webservices, so to get the full power of the MEME Suite you will need to download and install a local copy of the software. To see what has changed recently you can peruse the release notes.

http://meme-suite.org/

Address of the bookmark: http://meme-suite.org/

Prodigal (Prokaryotic Dynamic Programming Genefinding Algorithm)

Abhimanyu Singh — Thu, 29 Dec 2016 03:26:45 -0600

Prodigal (Prokaryotic Dynamic Programming Genefinding Algorithm) is a microbial (bacterial and archaeal) gene finding program developed at Oak Ridge National Laboratory and the University of Tennessee. Key features of Prodigal include:

Speed: Prodigal is an extremely fast gene recognition tool (written in very vanilla C). It can analyze an entire microbial genome in 30 seconds or less.
Accuracy: Prodigal is a highly accurate gene finder. It correctly locates the 3' end of every gene in the experimentally verified Ecogene data set (except those containing introns). It possesses a very sophisticated ribosomal binding site scoring system that enables it to locate the translation initiation site with great accuracy (96% of the 5' ends in the Ecogene data set are located correctly).
Specificity: Prodigal's false positive rate compares favorably with other gene identification programs, and usually falls under 5%.
GC-Content Indifferent: Prodigal performs well even in high GC genomes, with over a 90% perfect match (5'+3') to the Pseudomonas aeruginosa curated annotations.
Metagenomic Version: Prodigal can run in metagenomic mode and analyze sequences even when the organism is unknown.
Ease of Use: Prodigal can be run in one step on a single genomic sequence or on a draft genome containing many sequences. It does not need to be supplied with any knowledge of the organism, as it learns all the properties it needs to on its own.
Open Source: Prodigal source code is freely available under the General Public License.

Download the latest version of Prodigal at the Prodigal github page.
or
Browse the wiki documenation.

Address of the bookmark: http://prodigal.ornl.gov/

YAHA

Jit — Fri, 20 Jan 2017 05:38:05 -0600

YAHA, a fast and flexible hash-based aligner. YAHA is as fast and accurate as BWA-SW at finding the single best alignment per query and is dramatically faster and more sensitive than both SSAHA2 and MegaBLAST at finding all possible alignments. Unlike other aligners that report all, or one, alignment per query, or that use simple heuristics to select alignments, YAHA uses a directed acyclic graph to find the optimal set of alignments that cover a query using a biologically relevant breakpoint penalty. YAHA can also report multiple mappings per defined segment of the query. We show that YAHA detects more breakpoints in less time than BWA-SW across all SV classes, and especially excels at complex SVs comprising multiple breakpoints.

Availability: YAHA is currently supported on 64-bit Linux systems. Binaries and sample data are freely available for download from http://faculty.virginia.edu/irahall/YAHA.

Contact:

http://genome.wustl.edu/people/groups/detail/hall-lab/

Address of the bookmark: https://www.ncbi.nlm.nih.gov/pmc/articles/PMC3463118/