Compare structural and functional annotations of proteins between sequenced genomes.

Installation

To download the development version of pacman:

Download the zip ball or tar ball, decompress and run R CMD INSTALL on it, or use the devtools package to install the development version:

## Make sure your current packages are up to date
update.packages()
## devtools is required
devtools::install_github("trinker/pacman")

Note: Windows users need Rtools and devtools to install this way.

More at https://github.com/trinker/pacman

This package is a loose collection of scripts. To run the correction
routine see the section below. Descriptions of the other scripts
are at the bottom of this file.

Contact: gurtowsk@cshl.edu

In short, the correction algorithm takes as input the unitigs from a short read assembly and uses them to correct long read data. More background information for the algorithm can be found:
http://schatzlab.cshl.edu/presentations/2013-06-18.PBUserMeeting.pdf

Address of the bookmark: https://github.com/jgurtowski/ectools

Take a look at the PRICE software from the DeRisi lab. Its meant to do something very similar. http://derisilab.ucsf.edu/index.php?page=software

You could also look at SSPACE (http://www.baseclear.com/landingpages/basetools-a-wide-range-of-bioinformatics-solutions/sspacev12/), ATLAS tools (http://www.hgsc.bcm.tmc.edu/content/bcm-hgsc-software), and SCARPA (http://compbio.cs.toronto.edu/hapsembler/scarpa.html).

See the PAGIT protocol: http://www.sanger.ac.uk/resources/software/pagit/

In particular, take a look at the IMAGE tool: http://genomebiology.com/2010/11/4/R41

Also SOAPdenovo has ha function for scaffolding. Not sure about ABYSS

Here there is a useful explanation of several tools.

https://bioinformaticsonline.com/search?q=scaffolding&entity_type=object&entity_subtype=bookmarks&offset=0&search_type=entities

I could be wrong, but the above answers to your hypothetical scenario appear to miss the point that you aren't interested in assembling the full genome, just the 100 kb part you're interested in. I suggest the following algorithm:

1. Start with the initial assembly C0 of the contigs you have identified as overlapping your region of interest, and the set S of reads those contigs contain. Let C = C0.

2. Repeat:
a. Identify paired-end reads (not in C) for which one or both ends align within, or extending, contigs in C.
b. Identify unpaired reads that align extending these new paired-end reads.
c. Construct a new assembly C' from C and the new reads identified in (a) and (b).
d. Trim C' so it does not extend more than 100 kb to either end of C0. Set C = C'.
e. Let S' denote the reads that contribute to C'. If S' does not contain any reads not present in S, stop. Otherwise, Set S = S'.

3. If you don't have a complete assembly of the region of interest, generate an STS for each end of each contig, probe a library for clones including these STSes, subclone these clones into a paired-end sequencing vector, and generate paired-end reads for this library; then try steps (1) and (2) again, adding these new sequencing reads to what you had before.

4. If your average sequencing depth for the region of interest exceeds 25 or so without filling all gaps, it is likely that the remaining gaps represent sequences that are not getting cloned in your sequencing vectors. Try different sequencing vectors.

It is possible to create a vector by typing data directly into R using the combine function ‘c’

x

same as

x

creates the vector x with the numbers between 1 and 5.

You can see what is in an object at any time by typing its name;

x

will produce the output ‘[1] 1 2 3 4 5′

Note that names need to be quoted

daysofweek ← c(‘Monday’, ‘Tuesday’, ‘Wednesday’, ‘Thursday’, ‘Friday’);

Usually however you want to input from a file. We have touched on the ‘read.table’ function already.

mydata

Now mydata is a data frame with multiple vectors

each vector can be identified by the default syntax

#if any of these are typed it will print to screen

mydata$V1 mydata$V2 mydata$V3

By default the function assumes certain things from the file

• The file is a plain text file (there are function to read excel files: not covered here)
• columns are separated by any number of tabs or spaces
• there is the same number of data points in each column
• there is no header row (labels for the columns)
• there is no column with names for the rows** [I’ll explain].

If any of these are false, we need to tell that to the function

If it has a header column

mydata header=T also works

Note that there is a comma between different parts of the functions arguments

If there is one less column in the header row, then R assumes that the 1^st column of data after the header are the row names

Now the vectors (columns) are identified by their name

#if any of these are typed it will print to screen

mydata$A mydata$B mydata$C

# Summary about the whole data frame

summary(mydata)

# Summary information of column A

summary(mydata$A)

We can shortcut having to type the data frame each time by attaching it

attach(mydata)

# summary of column B as ‘mydata’ is attached

summary(B)

Two other important options for read.table

If is is separated only by tabs and has a header

mydata

Really useful if you have spaces in the contents of some columns, so R does not mess up reading the columns . However if the columns or of an uneven length it will tell you.

If you know that the file has uneven columns

mydata

This causes R to fill empty spaces in a columns with ‘NA’ .

The last two examples will still work with our file and give the same result as with only headers=T

Graphs

to get an idea of what R is capable of type

demo(graphics)

steps through the examples, and the code is printed to the screen

We will work with simpler examples that have immediate use to biologists.

Remember to get more information about the options to a function type ‘?function’

Histogram of A

hist(mydata$A)

If there was more data we could increase the number of vertical columns with the option, breaks=50 (or another relevant number).

boxplot(mydata)

We can get rid of the need to type the data frame each time by using the attach function

# if not already done so

attach(mydata)

boxplot(mydata$A, mydata$B, name=c(“Value A”, “Value B”) , ylab=“Count of Something”)

same as

boxplot(A, B, name=c(“Value A”, “Value B”) , ylab=“Count of Something”)

Scatter plot

# if not already done so

attach(mydata)

plot(A,B) # or plot(mydata$A, mydata$B)

SAVING an image

Windows users (Rgui) RIGHT click on image and select which you want.

These instructions work for everyone.

You need to create a new device of the type of file you need, then send the data to that device

to save as a png file (easy to load into the likes of powerpoint, also great for web applications.

png(‘filename’)

boxplot(A, B, name=c(“Value A”, “Value B”) , ylab=“Count of Something”)

or to save as a pdf

pdf(‘filename’)

boxplot(A, B, name=c(“Value A”, “Value B”) , ylab=“Count of Something”)

Note

• Nothing will appear on screen, the output is going to the file
• Also it may not be saved immediately but will once the device (or R) is turned quit.

To quit R type

q() # If you save your session, next time you start R, you will have your data preloaded.

Or if you want to remain in R

dev.off() #turns of the png (or pdf etc) device, thus forces the data to save

I have used the following assemblers

• Spades (v. 3.10.1)
• CANU (v. 1.6)
• Unicycler (v. v0.4.1)
• Miniasm (v. 0.2-r137-dirty)

I have used the following mappers

• minimap2 (v. 2.0rc1-r232)
• minimap (v. 0.2-r124-dirty)
• bwa (v. 0.7.12-r1039)

I have used the following polishing tools

• Racon (v. not available)
• Pilon (v. 1.18)
• Nanopolish (v. 0.8.3)

I have used the following tools to assess genome assembly characteristics

• ANI.pl (https://github.com/chjp/ANI)
• CheckM (v. 1.0.7)
• Prokka (v. 1.12)
• QUAST (v. 2.3)
• mummer (v. not available)

If you have any ideas or superior tools we have missed please let us know in the comments.

No of post : 01
Essential qualifications: i) Ph. D degree in Bioinformatics/computers/Bio-technology. OR ii) Master’s Degree in Bioinformatics/computers/Bio-technology with 1st division or 60% marks or equivalent overall grade point average with at least two years of research experience as evidenced from fellowship/Associateship/training/other engagements.
Desirable qualifications: i) Working Knowledge and Published Research papers in Bio-informatics.
Monthly emoluments : Rs. 23,000/- + HRA . for M.Sc degree holder Rs. 24,000/- + HRA for Ph.D degree holder
Maximum Age limit : Research Associate – Males- 40 years & Women 45 years.
SELECTION PROCEDURE FOR CENTRAL POTATO RESEARCH INSTITUTE (CPRI) – RESEARCH ASSOCIATE POST:

Written Test on 20/03/2015.
Shortlisted candidates will undertake face to face interview.
Dates are yet to be announced for the final selection
WALK-IN PROCEDURE FOR RESEARCH ASSOCIATE VACANCY IN CENTRAL POTATO RESEARCH INSTITUTE (CPRI):

Interested/eligible candidates should submit their application along with the attested copies of educational qualification (provisional degree of Masters and Ph.D is mandatory )/experience certificates and one passport size photograph to the Asstt. Admn. Officer(E-I), CPRI, Shimla-171001 at 9.30 AM on the date of interview. The candidates appearing for interview must bring original certificate with them and only those candidates possessing essential qualification as per advertisement will be interviewed. The Director, CPRI, Shimla reserves the right either to fill up the post or cancel the interview without assigning any reasons thereof. Application form is available in the website ( website: http//cpri.ernet.in). No TA/DA will be given by the Institute to the candidates. The Institute is located at Bemloe which is about 2 Kms from Main Bus Stand(Old)/3 Kms. from the Railway Station and about 5 Kms. from ISBT (Tutikandi).

Breeding Insight is funded by the U.S. Department of Agriculture (USDA) Agricultural Research Service (ARS) through Cornell University. The USDA ARS delivers scientific solutions to national and global agricultural challenges. As a global leader in agricultural discovery through scientific excellence, ARS is committed to delivering cutting-edge, scientific tools and innovative solutions for American farmers, producers, industry, and communities to support the nourishment and well-being of all people; sustaining our nation’s agroecosystems and natural resources; and ensuring the economic competitiveness and excellence of our agriculture.

Address of the bookmark: https://www.breedinginsight.org/

PRINCIPAL SCIENTIST Pay Band: Minimum pay of `43,000 in the PB-4 of `37400-67000/- + RGP of `10,000/-.

Age: The candidates must not have attained the age of 52 years as on 24.03.2015. There shall be no age limit for the Council’s employees.

ICAR-NATIONAL INSTITUTE OF BIOTIC STRESS MANAGEMENT, RAIPUR (CHHATTISGARH)

57. Principal Scientist (Agricultural Entomology) (Two post)

Qualifications Essential:

(i) Doctoral degree in Agricultural Entomology including relevant basic sciences.

(ii) 10 years experience in the relevant subject out of which at least 8 years should be as Scientist/ Lecturer/Extension Specialist or in an equivalent position in the Pay Band- 3 of `15600-39100 with Grade Pay of `5400/`6000/`7000/`8000 and 2 years as a Senior Scientist or in an equivalent position in the Pay Band- 4 of ` 37400-67000 with Grade Pay of ` 8700/ ` 9000.

(iii) The candidate should have made contribution to research/teaching/extension education as evidenced by published work/innovations and impact.

Desirable:

(i) Experience of using frontiers research tools in management of insect pests of crop plants.

(ii) Evidence of contributions to relevant field through publications/ patents/citation index to suggest a vision/perspective in biotic stress research.

61. Principal Scientist (Bioinformatics) (One post)

Qualifications Essential:

(i) Doctoral degree in Bioinformatics including relevant basic sciences. (ii) & (iii) As in item no. 57 above.

Desirable:

(i) Experience of using bioinformatics for advancement of knowledge and for research on biotic stress management.

(ii) Evidence of contributions to relevant field through publications/patents/citation index to suggest a vision/perspective in biotic stress research.

http://asrb.org.in/administrator/uploads_dir/1424859407english.pdf