• Filters SNVs from any variant caller to remove false positives
• Calculates metrics based on BAM files and provides filtering not possible with other tools
• Fully user-configurable filtering (including which filters to use and their thresholds)
• Option to use filters identical to ICGC recommendations

FiNGS provides researchers with a tool to reproducibly filter somatic variants that is simple to both deploy and use, with filters and thresholds that are fully configurable by the user. It ingests and emits standard variant call format (VCF) files and will slot into existing sequencing pipelines. It allows users to develop and implement their own filtering strategies and simple sharing of these with others.

FiNGS reliably improves upon the precision of default variant caller outputs and performs better than other tools designed for the same task.

Address of the bookmark: https://github.com/cpwardell/FiNGS

Part I – Basic Find Commands for Finding Files with Names
1. Find Files Using Name in Current Directory

Find all the files whose name is gene.txt in a current working directory.

# find . -name gene.txt

./gene.txt

2. Find Files Under Home Directory

Find all the files under /home directory with name gene.txt.

# find /home -name gene.txt

/home/gene.txt

3. Find Files Using Name and Ignoring Case

Find all the files whose name is gene.txt and contains both capital and small letters in /home directory.

# find /home -iname gene.txt

./gene.txt
./Gene.txt

4. Find Directories Using Name

Find all directories whose name is Gene in / directory.

# find / -type d -name Gene

/Gene

5. Find fasta Files Using Name

Find all php files whose name is gene.fasta in a current working directory.

# find . -type f -name gene.fasta

./gene.fasta

6. Find all PHP Files in Directory

Find all fasta files in a directory.

# find . -type f -name "*.fasta"

./gene.fasta
./cancer.fasta
./allgene.fasta

Part II – Find Files Based on their Permissions
7. Find Files With 777 Permissions

Find all the files whose permissions are 777.

# find . -type f -perm 0777 -print

8. Find Files Without 777 Permissions

Find all the files without permission 777.

# find / -type f ! -perm 777

9. Find SGID Files with 644 Permissions

Find all the SGID bit files whose permissions set to 644.

# find / -perm 2644

10. Find Sticky Bit Files with 551 Permissions

Find all the Sticky Bit set files whose permission are 551.

# find / -perm 1551

11. Find SUID Files

Find all SUID set files.

# find / -perm /u=s

12. Find SGID Files

Find all SGID set files.

# find / -perm /g+s

13. Find Read Only Files

Find all Read Only files.

# find / -perm /u=r

14. Find Executable Files

Find all Executable files.

# find / -perm /a=x

15. Find Files with 777 Permissions and Chmod to 644

Find all 777 permission files and use chmod command to set permissions to 644.

# find / -type f -perm 0777 -print -exec chmod 644 {} \;

16. Find Directories with 777 Permissions and Chmod to 755

Find all 777 permission directories and use chmod command to set permissions to 755.

# find / -type d -perm 777 -print -exec chmod 755 {} \;

17. Find and remove single File

To find a single file called gene.txt and remove it.

# find . -type f -name "gene.txt" -exec rm -f {} \;

18. Find and remove Multiple File

To find and remove multiple files such as .fa or .gb, then use.

# find . -type f -name "*.fa" -exec rm -f {} \;

OR

# find . -type f -name "*.gb" -exec rm -f {} \;

19. Find all Empty Files

To file all empty files under certain path.

# find /tmp -type f -empty

20. Find all Empty Directories

To file all empty directories under certain path.

# find /tmp -type d -empty

21. File all Hidden Files

To find all hidden files, use below command.

# find /tmp -type f -name ".*"

Part III – Search Files Based On Owners and Groups
22. Find Single File Based on User

To find all or single file called gene.txt under / root directory of owner root.

# find / -user root -name gene.txt

23. Find all Files Based on User

To find all files that belongs to user Rahul under /home directory.

# find /home -user rahul

24. Find all Files Based on Group

To find all files that belongs to group Developer under /home directory.

# find /home -group developer

25. Find Particular Files of User

To find all .txt files of user Rahul under /home directory.

# find /home -user rahul -iname "*.txt"

Part IV – Find Files and Directories Based on Date and Time
26. Find Last 50 Days Modified Files

To find all the files which are modified 50 days back.

# find / -mtime 50

27. Find Last 50 Days Accessed Files

To find all the files which are accessed 50 days back.

# find / -atime 50

28. Find Last 50-100 Days Modified Files

To find all the files which are modified more than 50 days back and less than 100 days.

# find / -mtime +50 –mtime -100

29. Find Changed Files in Last 1 Hour

To find all the files which are changed in last 1 hour.

# find / -cmin -60

30. Find Modified Files in Last 1 Hour

To find all the files which are modified in last 1 hour.

# find / -mmin -60

31. Find Accessed Files in Last 1 Hour

To find all the files which are accessed in last 1 hour.

# find / -amin -60

Part V – Find Files and Directories Based on Size
32. Find 50MB Files

To find all 50MB files, use.

# find / -size 50M

33. Find Size between 50MB – 100MB

To find all the files which are greater than 50MB and less than 100MB.

# find / -size +50M -size -100M

34. Find and Delete 100MB Files

To find all 100MB files and delete them using one single command.

# find / -size +100M -exec rm -rf {} \;

35. Find Specific Files and Delete

Find all .gb files with more than 10MB and delete them using one single command.

# find / -type f -name *.gb -size +10M -exec rm {} \;

Variant calling and/or genotyping

• DiscoSNP++ and discoSnpRAD: Reference-free small variant discovery (SNPs and indels)
• MindTheGap: Detection and assembly of large insertion variants
• TakeABreak: reference-free inversion discovery tool
• SVJedi: Structural Variant genotyper with long read data
• SVJedi-graph: Structural Variant genotyper with long read data using a variation graph

Sequence assembly

• MinYS: reference-guided genome assembly in metagenomics data
• MTG-link: local assembly tool for linked-read data
• Minia: De novo short read assembler
• de-novo pipeline: de-novo assembly pipeline (error correction / contigs / scaffolding) for genomes and meta-genomes
• Mapsembler2: Targeted assembly (not maintained)

Managing k-mers & indexation

• findere: simple strategy for speeding up queries and for reducing false positive calls from any Approximate Membership Query data structure.
  • fimpera extends findere adding the abundance information.
• kmtricks: modular tool suite for counting kmers, and constructing Bloom filters or kmer matrices, for large collections of sequencing data.
• kmindex is a tool for indexing and querying sequencing samples. It is built on top of kmtricks.
• back to sequences: Find sequences (reads, unitigs, genes) related to a set of kmers in large datasets, in a matter of seconds.
• Backpack Quotient Filter: k-mer indexing data structure with abundance
• short read connector: Detect similar reads from potentially large read set
• DSK: Count K-mer in sequences

Pangenome graph manipulation

• Pancat: Pangenome Comparison and Analysis Toolkit
• GFAGraphs: a Python library to handle pangenome graph files in GFA format.

Comparative metagenomics with k-mers

• Simka and SimkaMin: Comparative metagenomics for large-scale datasets
• Comparead & Commet: comparison of metagenomic datasets

Species and bacterial strains identification

• ORI: software using long nanopore reads to identify bacteria present in a sample at the strain level
• StrainFLAIR: STRAIN-level proFiLing using vArIation gRaph

General-purpose sequencing data manipulation

• GASSST: long read mapper
• Leon: short read compressor (now included in GATB-core)
• Bloocoo: short read corrector
• BCALM: Construct compacted de Bruijn graphs (unitigs)

 Protein Structure

• A_Purva: Contact Map Overlap solver
• MD-Jeep: Distance Geometry solver
• CSA: Comparative Structural Alignment

Workflow

• SLICEE: parallel execution of bioinformatics workflows

Comparative Genomics

• CASSIS: detection of rearrangement breakpoints
• PLAST: intensive bank-to-bank sequence comparison
• DRJBreakpointFinder: detection and precise localization of excision sites in proviral segments

Find more at http://www.imtech.res.in/raghava/

minimap -t 24 assembly.fasta long_reads.fastq.gz | racon -t 24 long_reads.fastq.gz - assembly.fasta racon_assembly.fasta
nucmer -p nucmer assembly.fasta racon_assembly.fasta
show-snps -C -T -r nucmer.delta

This reports Racon's changes in a table. You can exclude indels with the -I option in show-snps. 

This process (Racon -> MUMmer -> SNP table) solves the problem I originally raised in this issue. So as far as I'm concerned, you can close this issue (or keep it open if you still want to implement some kind of variant table).

No.: SPU/CISST/Advt./2014-15/519

ADVERTISEMENT for Teaching Positions (Contractual)

Applications for the following Contractual Teaching Position are invited for Centre for Interdisciplinary Studies in Science and Technology (CISST), Sardar Patel University:

2. Assistant Professor (ONE) (Contractual)

For the subject of Bioinformatics

Qualifications:

(I) Good academic record as defined by the concerned university with at least 55 % marks (or an equivalent grade in a point scale wherever grading system is followed) at the Master’s level

(II) Ph.D. degree in the concerned subject or in a relevant interdisciplinary subject
from an Indian University or NET/SLET clearance Contractual appointment carries a total Fixed Emoluments of Rs. 30,000/- p.m without any assurance of permanent Positions and related benefits.

An Application Form in prescribed Performa, available on University Website: www.spuvvn.edu should be filled in completely in Twelve Copies with self attested copies of certificates of qualifications and experience. Only one copy of each mark sheet be attached with the first copy of the application form. All 12 (Twelve) Application forms should be sent to Registrar’s office along with Demand Draft of Application form fee of Rs. 250/- (Non-refundable) in favour of “REGISTRAR, SARDAR PATEL UNIVERSITY, VALLABH VIDYANAGAR”. The S.C. and S.T. category candidates need not to pay Application fee.

Applicants who are in service should apply through their present employers. Candidates called for interview shall be required to attend at their own cost.

In absence of suitable candidate, the University may relax the eligibility criteria, for conditional appointment.

The last date of receipt of application by the University is 30th April, 2014

Advertisement: www.spuvvn.edu/careers/CISST%20Advt.%20April%202014.pdf

Basic Galaxy Tutorial

• RNA-Seq tutorial based on Trapnell et al. (2012) Nature Protocols

In this tutorial we cover the concepts of RNA-Seq differential gene expression (DGE) analysis using a very small synthetic dataset from a well studied organism.

Advanced Galaxy Tutorial

• RNA-Seq (Advanced) Tutorial

In this tutorial we compare the performance of three statistically-based differential expression tools:

* CuffDiff

* EdgeR

* DESeq2

Advanced Command Line Tutorial

• Graphical Output with CummeRbund introduces some basic commands using the cummeRbund package of the R programming language

You will need to install R, RStudio and cummeRbund on your PC (explained in the Tutorial). You will learn how to produce graphical output from RNA-Seq analysis previously done using a Cuffdiff analysis.

Variant Detection

Basic Galaxy Tutorial

• Variant Detection tutorial

In this tutorial we cover the concepts of detecting small variants (SNVs and indels) in human genomic DNA using a small set of reads from chromosome 22.

Advanced Galaxy Tutorial

• Variant Detection (Advanced) Tutorial

In this tutorial we compare the performance of three statistically-based variant detection tools:

* SAMtools: Mpileup

* GATK: Unified Genotyper

* FreeBayes

Each of these tools takes as its input a BAM file of aligned reads and generates a list of likely variants in VCF format

Pipelines are for those who are comfortable with using the UNIX command line; and often allow more control over branching and iteration logic.

• WGS/exome GATK-based variant calling pipeline

This is a basic variant-calling and annotation pipeline developed at the Victorian Life Sciences Computation Initiative (VLSCI), University of Melbourne. It is based around BWA, GATK and ENSEMBL and was originally designed for human (or similar) data. The master branch is configured for WGS data; there is an exome branch configured for variant calling in exome data.

To run the pipeline you will need Rubra: https://github.com/bjpop/rubra. Rubra uses the python Ruffus library: http://www.ruffus.org.uk/.

Protocols

• Familial Variant Calling

In this protocol we discuss and outline the process of calling familial related mutations.

• Somatic Variant Calling

In this protocol we discuss and outline the process of identifying somatic variants or mutations.

Assembly

Basic Galaxy Tutorial

• Genome assembly tutorial

In this tutorial we carry out de novo assembly of a microbial genome. We have also written a De novo Genome Assembly for Illumina Data Protocol for a more generic description of the method.

Protocol

• De novo Genome Assembly for Illumina Data

In this protocol we discuss and outline the process of de novo assembly for small to medium sized genomes. Use our Genome assembly tutorial to learn a specific case of using Galaxy to carry out de novo assembly of a microbial genome.

Small RNAs

Basic Galaxy Tutorial

• Quality control for small RNA

This tutorial covers initial steps of the workflow for analysis of short RNA expression such as a quality control of the raw reads, processing of the raw reads for the subsequent analysis and initial quality assessment of the library.

ChIP Seq

Protocol

• ChIP-Seq

In this protocol we discuss ChIP-Seq: a method to analyze the interaction between proteins and DNA.

Amplicons

Protocol

• Amplicon Alignment

In this protocol we discuss and outline the process of aligning custom amplicons using primers for high precision.

Learn Galaxy

Introduction to Galaxy, for those who are very new to Galaxy.

Using Histories and Workflows, for those with some Galaxy knowledge.

The Galaxy project website has many tutorials and screencasts about using Galaxy and the tools, and developing new tools.

Address of the bookmark: https://genome.edu.au/wiki/Learn

More at https://kevlar.readthedocs.io/en/latest/

https://www.cell.com/iscience/pdf/S2589-0042(19)30259-7.pdf

Address of the bookmark: https://github.com/kevlar-dev/kevlar

No of vacancies: 01

Pay scale:Rs. 15600 – 39100 + 6600/-

Essential Academic Qualifications / Experience : Good academic record as defined by the concerned university with at least 55% marks (or an equivalent grade in a point scale wherever grading system is followed) at the Master's Degree level in a relevant subject from an Indian University, or an equivalent degree from an accredited foreign university.

Besides fulfilling the above qualifications, the candidate must have cleared the National Eligibility Test (NET) conducted by the UGC, CSIR or similar test accredited by the UGC like SLET/ SET.

Notwithstanding anything contained in sub-clauses (a) and (b) to this Clause, candidates, who are, or have been awarded a Ph.D. Degree in accordance with the University Grants Commission (Minimum Standards and Procedure for Award of Ph.D. Degree) Regulations, 2009, shall be exempted from the requirement of the minimum eligibility condition of NET/SLET/SET for recruitment and appointment of Assistant Professor or equivalent positions in Universities/Colleges/Institutions.

NET/SLET/SET shall also not be required for such Masters Programmes in disciplines for which NET/SLET/SET is not conducted.

Apply online: http://www.psc.cg.gov.in/htm/OA_ME2014.html

Last Date for Online Registration: 22/05/2014

For more details: http://www.psc.cg.gov.in/pdf/Advertisement/ADV_ME2014.pdf