http://docpollard.org/

Tools

http://docpollard.org/resources/software/

"The mathematical, statistical and computing methods that aim to solve biological problems using DNA and amino acid sequences and related information."

"The collection, organization and analysis of large amounts of biological data, using networks of computers and databases." - from the glossary for ABC Science Online's feature: The State of the Genome 2001.

"It is defined here as an interdisciplinary research area that applies computer and information science to solve biological problems. However, this is not the only definition. The field is being defined (and redefined) at present, and there are probably as many definitions as there are bioinformaticians (bioinformaticists?).

The following references are a snapshot of the moving target named bioinformatics. ... " - from the University of Minnesota Graduate Program in Bioinformatics' page: What is Bioinformatics,

"The application of computer technology to the management of biological information.Bioinformatics uses computers to solve problems in the life sciences, such as determination of DNA and protein sequences, investigation of protein functions, development of pharmaceuticals. It involves the creation of extensive electronic databases on genomes and protein sequences, and techniques such as the three-dimensional modeling of biomolecules and biologic systems. ..." - from the Bioinformatics Glossary edited by Charles E. Kahn, Jr., Medical College of Wisconsin.

"Bioinformatics is the field of science in which biology, computer science, and information technology merge to form a single discipline. The ultimate goal of the field is to enable the discovery of new biological insights as well as to create a global perspective from which unifying principles in biology can be discerned." - from the National Center for Biotechnology Information's Bioinformatics Factsheet.

"Research, development, or application of computational tools and approaches for expanding the use of biological, medical, behavioral or health data, including those to acquire, store, organize, archive, analyze, or visualize such data." - NIH Bioinformatics Web site

"The use of computers, laboratory robots and software to create, manage and interpret massive sets of complex biological data." - from the glossary for the University of Michigan Health System's Symphony of Life: Genetics & Medicine Web site.

"The field of science in which biology, computer science, and information technology merge into a single discipline.There are three important sub-disciplines within bioinformatics: (1) the development of new algorithms and statistics with which to assess relationships among members of large data sets; (2) the analysis and interpretation of various types of data including nucleotide and amino acid sequences, protein domains, and protein structures; and (3) the development and implementation of tools that enable efficient access and management of different types of information." - U.S. Environmental Protection Agency's ComputationalToxicology Research Glossary.

What is Bioinformatics? "One idea for a definition: (Molecular) Bio - informatics = is conceptualizing biology in terms of molecules (in the sense of physical-chemistry) and then applying "informatics" techniques (derived from disciplines such as applied math, CS, and statistics) to understand and organize the information associated with these molecules, on a large-scale." - By Mark Gerstein, Gerstein Group - Yale Bioinformatics.

Bioinformatics

Definition:

Bioinformatics derives knowledge from computer analysis of biological data. These can consist of the information stored in the genetic code, but also experimental results from various sources, patient statistics, and scientific literature. Research in bioinformatics includes method development for storage, retrieval, and analysis of the data. Bioinformatics is a rapidly developing branch of biology and is highly interdisciplinary, using techniques and concepts from informatics, statistics, mathematics, chemistry, biochemistry, physics, and linguistics. It has many practical applications in different areas of biology and medicine.

Description:

The history of computing in biology goes back to the 1920s when scientists were already thinking of establishing biological laws solely from data analysis by induction (e.g. A.J. Lotka, Elements of Physical Biology, 1925). However, only the development of powerful computers, and the availability of experimental data that can be readily treated by computation (for example, DNA or amino acid sequences and three–dimensional structures of proteins) launched bioinformatics as an independent field. Today, practical applications of bioinformatics are readily available through the world wide web, and are widely used in biological and medical research. As the field is rapidly evolving, the very definition of bioinformatics is still the matter of some debate.

The relationship between computer science and biology is a natural one for several reasons. First, the phenomenal rate of biological data being produced provides challenges: massive amounts of data have to be stored, analysed, and made accessible. Second, the nature of the data is often such that a statistical method, and hence computation, is necessary. This applies in particular to the information on the building plans of proteins and of the temporal and spatial organisation of their expression in the cell encoded by the DNA. Third, there is a strong analogy between the DNA sequence and a computer program (it can be shown that the DNA represents a Turing Machine).

Analyses in bioinformatics focus on three types of datasets: genome sequences, macromolecular structures, and functional genomics experiments (e.g. expression data, yeast two–hybrid screens). But bioinformatic analysis is also applied to various other data, e.g. taxonomy trees, relationship data from metabolic pathways, the text of scientific papers, and patient statistics. A large range of techniques are used, including primary sequence alignment, protein 3D structure alignment, phylogenetic tree construction, prediction and classification of protein structure, prediction of RNA structure, prediction of protein function, and expression data clustering. Algorithmic development is an important part of bioinformatics, and techniques and algorithms were specifically developed for the analysis of biological data (e.g., the dynamic programming algorithm for sequence alignment).

Bioinformatics has a large impact on biological research. Giant research projects such as the human genome project [4] would be meaningless without the bioinformatics component. The goal of sequencing projects, for example, is not to corroborate or refute a hypothesis, but to provide raw data for later analysis. Once the raw data are available, hypotheses may be formulated and tested in silico. In this manner, computer experiments may answer biological questions which cannot be tackled by traditional approaches. This has led to the founding of dedicated bioinformatics research groups as well as to a different work practice in the average bioscience laboratory where the computer has become an essential research tool.

Three key areas are the organisation of knowledge in databases, sequence analysis, and structural bioinformatics.

Organizing biological knowledge in databases:

Biological raw data are stored in public databanks (such as Genbank or EMBL for primary DNA sequences). The data can be submitted and accessed via the world wide web. Protein sequence databanks like trEMBL provide the most likely translation of all coding sequences in the EMBL databank. Sequence data are prominent, but also other data are stored, e. g. yeast two–hybrid screens, expression arrays, systematic gene–knock–out experiments, and metabolic pathways.

The stored data need to be accessed in a meaningful way, and often contents of several databanks or databases have to be accessed simultaneously and correlated with each other. Special languages have been developed to facilitate this task (such as the Sequence Retrieval System (SRS) and the Entrez system). An unsolved problem is the optimal design of inter–operating database systems. Databases provide additional functionality such as access to sequence homology searches and links to other databases and analysis results. For example, SWISSPROT [1] contains verified protein sequences and more annotations describing the function of a protein. Protein 3D structures are stored in specific databases (for example, the Protein Data Bank [2], now primarily curated and developed by the Research Collaboratory for Structural Bioinformatics). Organism specific databases have been developed (such as ACEDB, the A C. Elegans DataBase for the C. elegans genome, FLYBASE for D. melanogaster etc). A major problem are errors in databanks and databases (mostly errors in annotation), in particular since errors propagate easily through links.

Also databases of scientific literature (such as PUBMED, MEDLINE) provide additional functionality, e.g. they can search for similar articles based on word–usage analysis. Text recognition systems are being developed that extract automatically knowledge about protein function from the abstracts of scientific articles, notably on protein–protein interactions.

Analysing sequence data:

The primary data of sequencing projects are DNA sequences. These become only really valuable through their annotation. Several layers of analysis with bioinformatics tools are necessary to arrive from a raw DNA sequence at an annotated protein sequences:

• establish the correct order of sequence contigs to obtain one continuous sequence;
• find the tranlation and transcription initiation sites, find promoter sites, define open reading frames (ORF);
• find splice sites, introns, exons;
• translate the DNA sequence into a protein sequence, searching all six frames;
• compare the DNA sequence to known protein sequences in order to verify exons etc with homologuous sequences.

Some completely automated annotation systems have been developed (e.g., GENEQUIZ), which use a multitude of different programs and methods.

The protein sequences are further analysed to predict function. The function can often be inferred if a sequence of a homologous protein with known function can be found. Homology searches are the predominant bioinformatics application, and very efficient search methods have been developed [3]. The often difficult distinction between orthologous sequences and paralogous sequences facilitates the functional annotation in the comparison of whole genomes. Several methods detect glycolysation, myristylation and other sites, and the prediction of signal peptides in the amino acid sequence give valuable information about the subcellular location of a protein.

The ultimate goal of sequence annotation is to arrive at a complete functional description of all genes of an organism. However, function is an ill–defined concept. Thus, the simplified idea of “one gene – one protein – one structure – one function” cannot take into account proteins that have multiple functions depending on context (e.g., subcellar location and the presence of cofactors). Well-known cases of “moonlighting” proteins are lens crystalline and phosphoglucose isomerase. Currently, work on ontologies is under way to explicitly define a vocabulary that can be applied to all organisms even as knowledge of gene and protein roles in cells is accumulating and changing.

Families of similar sequences contain information on sequence evolution in the form of specific conservation patters at all sequence positions. Multiple sequence alignments are useful for

• building sequence profiles or Hidden Markov Models to perform more sensitive homology searches. A sequence profile contains information about the variability of every sequence position. improving structure prediction methods (secondary structure prediction). Sequence profile searches have become readily available through the introduction of PsiBLAST [3];
• studying evolutionary aspects, by the construction of phylogenetic trees from the pairwise differences between sequences: for example, the classification with 70S, 30S RNAs established the separate kingdom of archeae;
• determining active site residues, and residues specifc for subfamilies;
• predicting protein–protein interactions;
• analysing single nucleotide polymorphisms to hunt for genetic sources of deseases.
• Many complete genomes of microorganisms and a few of eukaryotes are available [4]. By analysis of entire genome sequences a wealth of additional information can be obtained. The complete genomic sequence contains not only all protein sequences but also sequences regulating gene expression. A comparison of the genomes of genetically close organisms reveals genes responsible for specific properties of the organisms (e.g., infectivity). Protein interactions can be predicted from conservation of gene order or operon organisation in different genomes. Also the detection of gene fusion and gene fission (i.e, one protein is split into two in another genome) events helps to deduce protein interactions.

Structural bioinformatics:

This branch of bioinformatics is concerned with computational approaches to predict and analyse the spatial structure of proteins and nucleic acids. Whereas in many cases the primary sequence uniquely specifies the three–dimensional (3D) structure, the specific rules are not well understood, and the protein folding problem remains largely unsolved. Some aspects of protein structure can already be predicted from amino acid content. Secondary structure can be deduced from the primary sequence with statistics or neural networks. When using a multiple sequence alignment, secondary structure can be predicted with an accuracy above 70 %.

3D models can be obtained most easily if the 3D structure of a homologous protein is known (homology modelling, comparative modelling). A homology model can only be as good as the sequence alignment: whereas protein relationships can be detected at the 20% identity level and below, a correct sequence alignment becomes very difficult, and the homology model will be doubtful. From 40 to 50% identity the models are usually mostly correct; however, it is possible to have 50% identity between two carefully designed protein sequences with different topology (the so –called JANUS protein). Remote relationships that are undetectable by sequence comparisons may be detected by sequence–to–structure–fitness (or threading) approaches: the search sequence is systematically compared to all known protein structures. Ab initio predictions of protein 3D structure remains the major challenge; some progress has been made recently by combining statistical with force–field based approaches.

Membrane proteins are interesting drug targets. It is estimated that membrane receptors form 50 % of all drug targets in pharmacological research. However, membrane proteins are underrepresented in the PDB structure database. Since membrane proteins are usually excluded from structural genomics initiatives due to technical problems, the prediction of transmembrane helices and solvent accessibility is very important. Modern methods can predict transmembrane helices with a reliability greater than 70 %.

Understanding the 3D structure of a macromolecule is crucial for understanding its function. Many properties of the 3D structure cannot be deduced directly from the primary sequence. Obtaining better understanding of protein function is the driving force behind structural genomics efforts, which can be thus understood as part of functional genomics. Similar structure can imply similar function. General structure–to–function relationships can be obtained by statistical approaches, for example, by relating secondary structure to known protein function or surface properties to cell location.

The increased speed of structure determination necessary for the structural genomics projects make an independent validation of the structures (by comparison to expected properties) particularly important. Structure validation helps to correct obvious errors (e.g., in the covalent structure) and leads to a more standardized representation of structural data, e.g., by agreeing on a common atom name nomenclature. The knowledge of the structure quality is a prerequisite for further use of the structure, e.g in molecular modelling or drug design.

In order to make as much data on the structure and its determination available in the databases, approaches for automated data harvesting are being developed. Structure classification schemes, as implemented for example in the SCOP, CATH, and FSSP databases, elucidate the relationship between protein folds and function and shed light on the evolution of protein domains.

Combined analysis of structural and genomic data will certainly get more important in the near future. Protein folds can be analysed for whole genomes. Protein–protein interactions predicted on the sequence level, can be studied in more detail on the structure level. Single Nucleotide Polymorphisms can be mapped on 3D structures of proteins in order to elucidate specific structural causes of disease.

More detailed aspects of protein function can be obtained also by force–field based approaches. Whereas protein function requires protein dynamics, no experimental technique can observe it directly on an atomic scale, and motions have to be simulated by molecular dynamics (MD) simulations. Also free energy differences (for example between binding energies of different protein ligands) can be characterized by MD simulations. Molecular mechanics or molecular dynamics based approaches are also necessary for homology modelling and for structure refinement in X–ray crystallography and NMR structure determination.

Drug design exploits the knowledge of the 3D structure of the binding site (or the structure of the complex with a ligand) to construct potential drugs, for example inhibitors of viral proteins or RNA. In addition to the 3D structure, a force field is necessary to evaluate the interaction between the protein and a ligand (to predict binding energies). In virtual screening, a library of molecules is tested on the computer for their capacities to bind to the macromolecule.

Pharmacological Relevance:

Many aspects of bioinformatics are relevant for pharmacology. Drug targets in infectious organisms can be revealed by whole genome comparisons of infectious and non–infectious organisms. The analysis of single nucleotide polymorphisms reveals genes potentially responsible for genetic deseases. Prediction and analysis of protein 3D structure is used to develop drugs and understand drug resistance.

Patient databases with genetic profiles, e.g. for cardiovascular diseases, diabetes, cancer, etc. may play an important role in the future for individual health care, by integrating personal genetic profile into diagnosis, despite obvious ethical problems. The goal is to analyse a patient’s individual genetic profile and compare it with a collection of reference profiles and other related information. This may improve individual diagnosis, prophylaxis, and therapy.

References:

Bairoch A, Apweiler R (2000) The SWISS–PROT protein sequence database and its supplement TrEMBL in 2000. Nucleic Acids Res. 28:45–48
Berman HM, Westbrook J, Feng Z, Gilliland G, Bhat TN, Weissig H, Shindyalov IN, Bourne PE (2000) The Protein Data Bank. Nucleic Acids Res. 28:235–42
Altschul SF, Madden TL, Schaffer AA, Zhang J, Zhang Z, Miller W, Lipman DJ (1997) Gapped BLAST and PSI–BLAST: a new generation of protein database search programs. Nucleic Acids Res. 25:3389–3402
Pearson WR (2000) Flexible sequence similarity searching with the FASTA3 program package. Methods Mol. Biol. 132:185–219
The Genome International Sequencing Consortium (2001) Initial sequencing and analysis of the human genome. Nature 409:860–921
JC Venter et al. (2001) The sequence of the human genome. Science 291:1304–1351
R.D. Fleischmann et al. (1995) Whole–genome random sequencing and assembly of haemophilus–influenzae. Science 269:496–51

Post I

Name of the Post: Scientist-E (Non-Medical)

Number of positions: One

Upper Age limit: 50 years

Post II

Name of the Post: Scientist-D (Non-Medical)

Number of positions: Six

Upper Age limit: 45 years

Fee:

Application Fee of Rs. 1500/- (Rupees one thousand five hundred only) is needed. SC / ST / Women/ PWD/ EWS applicants are exempted from application fee. Application Fee is to be paid by candidates through online web link given up the application. Application fees when paid will certainly not be reimbursed under any situations.

How to apply:

i) Candidates should apply online on https://recruit.icmr.org.in. A separate application needs to be submitted for every post, with the required application fee.

ii) Following self-attested documents are required to be uploaded together with the application:
a) Proof of Date of Birth.
b) Educational qualifications.
c) Experience.

More at https://recruit.icmr.org.in/assets/uploads/advertisement/ICMR_Advertisement_06112020.pdf

Collection of tutorials developed and maintained by the worldwide Galaxy community

Address of the bookmark: https://training.galaxyproject.org/training-material/

*The journals are not listed in any ascending, descending, or impact factors oders. 

Bioinformatics 

Journal of Computational Biology

Briefings in Bioinformatics

In Silico Biology

Structure

Protein Science

Protein Engineering

Proteomics

Nucleic Acids Research

Trends in Biotechnology

Proceedings of the National Academy of Sciences

Folding and Design

Genome Biology

Journal of Biomedical Informatics

Bioinformation

Journal of Computational Intelligence in Bioinformatics

Journal of Structural and Functional Genomics

Journal of Molecular Graphics and Modelling

Metabolic Engineering

Computers & Chemistry

Artificial Intelligence in Medicine

Journal of Biomedical Science

Artificial Intelligence

Machine Learning

Applied Bioinformatics

Applied Genomics and Proteomics

BMC Bioinformatics

Online Journal of Bioinformatics (OJB)

PSB On-Line Proceedings

Bioinformatics: Information Technology & Systems (BITS)

Data Mining and Knowledge Discovery

The EMBO Journal

Current Opinions in Structural Biology

Journal of Molecular Microbiology and Biotechnology

Nature

Nature Structural Biology

Journal of Machine Learning Research

Nature Genetics

Current Opinion in Genetics & Development

Nature Biotechnology

Trends in Biochemical Sciences

Proteins: Structure, Function, and Genetics

Nature Cell Biology

Trends in Genetics

ChemBioChem

Trends in Molecular Medicine

Journal of Molecular Modelling

Trends in Pharmacological Sciences

Drug Discovery Today

Others Free Online Full-text Journals

More at https://instruct-eric.eu/jobs/scientist-position-in-structural-bioinformatics-at-lonza-cambridge-uk/

Applications are invited for the post of Project Assistant to work in the following
project.

• Title of the project: "A novel approach for the identification of key regulatory molecules and their pathways for Rheumatoid Arthritis" funded by Department of Science and Technology, New Delhi, Government of India.

• Project Assistant

• Essential Qualification: The minimum essential qualification would be M.Sc/B.Tech. in Bioinformatics/ Computer Science /Biotechnology.

• Salary : Rs. 8,000/month for a period of 3 years

Application in plain paper with following details: Name, Address, Date of Birth and Educational Qualifications and details of research experience with publications if any, may be sent to:

Mr. Sachidanand Singh,
Principal Investigator,
Department of Bioinformatics, School of Biotechnology and Health Sciences
Karunya University,
Karunya Nagar, Coimbatore- 641114

Ph.no: 09489677764, 09047654981

E-mail: sachidanand@karunya.edu

http://www.karunya.edu/bioinformatics/people/faculty/

Deadline : 25th August 2013

Advertisement: www.karunya.edu/bioinformatics/Project%20Assistant%20in%20SERB.pdf

Research Interest and Activities: 1. Plant Genetic Transformations
2. Molecular Population Genetics 3. Detection of human and Animals diseases 4. Breast Cancer­specific protein marker 5. Phytochemical 6. Genomic map 7. Bioremediation 8. Tissue Culture.

Web site and links: www.geocity.cbge.com

For more information visit: http://www.snubi.org/TBC2013/

More at https://okstate.csod.com/ats/careersite/JobDetails.aspx?site=8&id=9874