BOL: Related items

HybPiper

Jit — Fri, 04 Nov 2016 05:02:10 -0500

HybPiper was designed for targeted sequence capture, in which DNA sequencing libraries are enriched for gene regions of interest, especially for phylogenetics. HybPiper is a suite of Python scripts that wrap and connect bioinformatics tools in order to extract target sequences from high-throughput DNA sequencing reads.

Targeted bait capture is a technique for sequencing many loci simultaneously based on bait sequences. HybPiper pipeline starts with high-throughput sequencing reads (for example from Illumina MiSeq), and assigns them to target genes using BLASTx or BWA. The reads are distributed to separate directories, where they are assembled separately using SPAdes. The main output is a FASTA file of the (in frame) CDS portion of the sample for each target region, and a separate file with the translated protein sequence.

HybPiper also includes post-processing scripts, run after the main pipeline, to also extract the intronic regions flanking each exon, investigate putative paralogs, and calculate sequencing depth. For more information, please see our wiki.

HybPiper is run separately for each sample (single or paired-end sequence reads). When HybPiper generates sequence files from the reads, it does so in a standardized directory hierarchy. Many of the post-processing scripts rely on this directory hierarchy, so do not modify it after running the initial pipeline. It is a good idea to run the pipeline for each sample from the same directory. You will end up with one directory per run of HybPiper, and some of the later scripts take advantage of this predictable directory structure.

Address of the bookmark: https://github.com/mossmatters/HybPiper

R Graphical Cookbook by Winston Chang

Abhimanyu Singh — Fri, 04 Nov 2016 12:50:30 -0500

R Graphical Cookbook by Winston Chang

A very nice book by Winston Chang for R ethusiast. The R code presented in these pages is the R code actually used to produce the Figures in the book. There will be differences compared to the code chunks shown in the text of the book, but in most cases the differences will be that these pages contain additional code to lay out multiple plots on a single "page".

The code presented for each figure is self-contained, i.e., all code required to produce the figure is included. This means that there is sometimes considerable overlap of code between several figures In some cases, it may be necessary to install an add-on package from CRAN to get the code to run.

More books at http://www.e-reading.club/bookreader.php/137370/C486x_APPb.pdf

Illumina based assembly pipeline steps !

Surabhi Chaudhary — Fri, 10 Dec 2021 06:22:54 -0600

Illumina

Merge re-sequenced FastQ files (cat)
Read QC (FastQC)
Adapter trimming (fastp)
Removal of host reads (Kraken 2; optional)
Variant calling
1. Read alignment (Bowtie 2)
2. Sort and index alignments (SAMtools)
3. Primer sequence removal (iVar; amplicon data only)
4. Duplicate read marking (picard; optional)
5. Alignment-level QC (picard, SAMtools)
6. Genome-wide and amplicon coverage QC plots (mosdepth)
7. Choice of multiple variant calling and consensus sequence generation routes (iVar variants and consensus; default for amplicon data || BCFTools, BEDTools; default for metagenomics data)
  - Variant annotation (SnpEff, SnpSift)
  - Consensus assessment report (QUAST)
  - Lineage analysis (Pangolin)
  - Clade assignment, mutation calling and sequence quality checks (Nextclade)
  - Individual variant screenshots with annotation tracks (ASCIIGenome)
8. Intersect variants across callers (BCFTools)
De novo assembly
1. Primer trimming (Cutadapt; amplicon data only)
2. Choice of multiple assembly tools (SPAdes || Unicycler || minia)
  - Blast to reference genome (blastn)
  - Contiguate assembly (ABACAS)
  - Assembly report (PlasmidID)
  - Assembly assessment report (QUAST)
Present QC and visualisation for raw read, alignment, assembly and variant calling results (MultiQC)

fqtools

Jit — Thu, 08 Dec 2016 09:31:12 -0600

fqtools is a software suite for fast processing of FASTQ files. Various file manipulations are supported. See below for a full list of the subcommands available and a brief description of their purpose. Most of the individual subcommands will take either a single file or a pair of files as input. If no input file is specified, fqtools will attempt to read data from stdin. In this case, it is advisabe to specify the format of the data provided. For subcommands that generate FASTQ data, either a single file or a pair of files will be generated. If no -o argument is provided, single files will be writted to stdout.

Address of the bookmark: https://github.com/alastair-droop/fqtools

BIMA V3: an aligner customized for mate pair library sequencing

Abhimanyu Singh — Wed, 14 Dec 2016 15:20:00 -0600

Summary: Mate pair library sequencing is an effective and economical method for detecting genomic structural variants and chromosomal abnormalities. Unfortunately, the mapping and alignment of mate pair read pairs to a reference genome is a challenging and
time consuming process for most NGS alignment programs. Large insert sizes, introduction of library preparation protocol artifacts (biotin junction reads, paired-end read contamination, chimeras, etc.), and presence of structural variant breakpoints within reads increases mapping and alignment complexity. We describe an algorithm that is up to 20 times faster and 25% more accurate than popular NGS alignment programs when processing mate pair sequencing.
Availability: http://bioinformaticstools.mayo.edu/research/bima/
Contact: vasmatzis.george@mayo.edu

Address of the bookmark: http://bioinformatics.oxfordjournals.org/content/early/2014/02/12/bioinformatics.btu078.full.pdf

LAST

Bulbul — Mon, 19 Dec 2016 14:07:53 -0600

LAST can:

Handle big sequence data, e.g:
- Compare two vertebrate genomes
- Align billions of DNA reads to a genome
Indicate the reliability of each aligned column.
Use sequence quality data properly.
Compare DNA to proteins, with frameshifts.
Compare PSSMs to sequences
Calculate the likelihood of chance similarities between random sequences.
Do split and spliced alignment.
Train alignment parameters for unusual kinds of sequence (e.g. nanopore).

Address of the bookmark: http://last.cbrc.jp/

Bambus

Jit — Tue, 16 Aug 2016 08:09:15 -0500

Bambus 2.0, the second generation Bambus scaffolder available as an open source package. While most other scaffolders are closely tied to a specific assembly program, Bambus accepts the output from most current assemblers and provides the user with great flexibility in choosing the scaffolding parameters. In particular, Bambus is able to accept contig linking data other than specified by mate-pairs. Such sources of information include alignment to a reference genome (Bambus can directly use the output of MUMmer), physical mapping data, or information about gene synteny.

Home Page:

http://sourceforge.net/apps/mediawiki/amos/index.php?title=Bambus2

Address of the bookmark: https://www.cbcb.umd.edu/software/bambus2

GAM-NGS: genomic assemblies merger for next generation sequencing

Jit — Mon, 19 Dec 2016 06:07:05 -0600

GAM-NGS (Genomic Assemblies Merger for Next Generation Sequencing), whose primary goal is to merge two or more assemblies in order to enhance contiguity and correctness of both. GAM-NGS does not rely on global alignment: regions of the two assemblies representing the same genomic locus (called blocks) are identified through reads' alignments and stored in a weightedgraph. The merging phase is carried out with the help of this weighted graph that allows an optimal resolution of local problematic regions.

Address of the bookmark: https://github.com/vice87/gam-ngs

GenomeComp

Jit — Fri, 17 Feb 2017 08:38:32 -0600

GenomeComp is a tool for summarizing, parsing and visualizing the genome wide sequence comparison results derived from voluminous BLAST textual output, so as to locate the rearrangements, insertions or deletions of genome segments between species or strains.

It can be easily used to compare, parsing and visualize large genomic sequences, especially closely related genomes such as inter-species or inter-strains. In addition, it can also show other sequence features like repeat sequence distributions in one whole-genome DNA sequence by comparing the genome to itself.

It is a stand-alone graphical user interface (GUI) program which runs on Linux, Unix, Mac OS X (tested on version 10.2.4 only) and Microsoft Windows platforms and is written in Perl/Tk.

Address of the bookmark: http://www.mgc.ac.cn/GenomeComp/

BRIG

Jit — Thu, 16 Feb 2017 13:14:25 -0600

BRIG is a free cross-platform (Windows/Mac/Unix) application that can display circular comparisons between a large number of genomes, with a focus on handling genome assembly data. The application is available at:http://sourceforge.net/projects/brig

If you have any questions or comments, post them on one of the trackers on BRIG’s SourceForge page:http://sourceforge.net/tracker/?group_id=328245.

Features:

Images show similarity between a central reference sequence and other sequences as concentric rings.
BRIG will perform all BLAST comparisons and file parsing automatically via a simple GUI.
Contig boundaries and read coverage can be displayed for draft genomes; customized graphs and annotations can be displayed.
Using a user-defined set of genes as input, BRIG can display gene presence, absence, truncation or sequence variation in a set of complete genomes, draft genomes or even raw, unassembled sequence data.
BRIG also accepts SAM-formatted read-mapping files enabling genomic regions present in unassembled sequence data from multiple samples to be compared simultaneously

Address of the bookmark: http://brig.sourceforge.net/