BOL: Related items

LUMPY

Shruti Paniwala — Thu, 25 Aug 2016 08:05:02 -0500

A probabilistic framework for structural variant discovery.

Ryan M Layer, Colby Chiang, Aaron R Quinlan, and Ira M Hall. 2014. "LUMPY: a Probabilistic Framework for Structural Variant Discovery." Genome Biology 15 (6): R84. doi:10.1186/gb-2014-15-6-r84.

More at https://github.com/arq5x/lumpy-sv

Address of the bookmark: https://github.com/arq5x/lumpy-sv

HapCUT2: robust and accurate haplotype assembly for diverse sequencing technologies

Jit — Tue, 15 May 2018 07:35:26 -0500

HapCUT2 is a maximum-likelihood-based tool for assembling haplotypes from DNA sequence reads, designed to "just work" with excellent speed and accuracy. We found that previously described haplotype assembly methods are specialized for specific read technologies or protocols, with slow or inaccurate performance on others. With this in mind, HapCUT2 is designed for speed and accuracy across diverse sequencing technologies, including but not limited to: NGS short reads (Illumina HiSeq) clone-based sequencing (Fosmid or BAC clones) SMRT reads (PacBio) Oxford Nanopore reads 10X Genomics Linked-Reads proximity-ligation (Hi-C) reads high-coverage sequencing (>40x coverage-per-SNP) using above technologies combinations of the above technologies (e.g. scaffold long reads with Hi-C reads) See below for specific examples of command line options and best practices for some of these technologies. NOTE: At this time HapCUT2 is for diploid organisms only. VCF input should contain diploid variants. If you use HapCUT2 in your research, please cite: Edge, P., Bafna, V. & Bansal, V. HapCUT2: robust and accurate haplotype assembly for diverse sequencing technologies. Genome Res. gr.213462.116 (2016). doi:10.1101/gr.213462.116

Address of the bookmark: https://github.com/vibansal/HapCUT2

Ka, Ks and Ka/Ks calculations

Poonam Mahapatra — Mon, 29 Aug 2016 11:44:11 -0500

gKaKs is a codon-based genome-level Ka/Ks computation pipeline developed and based on programs from four widely used packages: BLAT, BLASTALL (including bl2seq, formatdb and fastacmd), PAML (including codeml and yn00) and KaKs_Calculator (including 10 substitution rate estimation methods). gKaKs can automatically detect and eliminate frameshift mutations and premature stop codons to compute the substitution rates (Ka, Ks and Ka/Ks) between a well-annotated genome and a non-annotated genome or even a poorly assembled scaffold dataset. It is especially useful for newly sequenced genomes that have not been well annotated.

Look for KaKs calculation:

https://github.com/fumba/kaks-calculator

http://longlab.uchicago.edu/?q=gKaKs

http://www.ncbi.nlm.nih.gov/pubmed/23314322

Address of the bookmark: http://longlab.uchicago.edu/?q=gKaKs

assemblytics: delta file to analyze alignments of an assembly to another assembly or a reference genome

Jit — Thu, 14 Jun 2018 07:31:00 -0500

Download and install MUMmer Align your assembly to a reference genome using nucmer (from MUMmer package) $ nucmer -maxmatch -l 100 -c 500 REFERENCE.fa ASSEMBLY.fa -prefix OUT Consult the MUMmer manual if you encounter problems Optional: Gzip the delta file to speed up upload (usually 2-4X faster) $ gzip OUT.delta Then use the OUT.delta.gz file for upload. Upload the .delta or delta.gz file (view example) to Assemblytics Important: Use only contigs rather than scaffolds from the assembly. This will prevent false positives when the number of Ns in the scaffolded sequence does not match perfectly to the distance in the reference. The unique sequence length required represents an anchor for determining if a sequence is unique enough to safely call variants from, which is an alternative to the mapping quality filter for read alignment. http://assemblytics.com/

Address of the bookmark: http://assemblytics.com/

BRAKER: pipeline for fully automated prediction of protein coding genes with GeneMark-ES/ET and AUGUSTUS in novel eukaryotic genomes

Jit — Thu, 01 Sep 2016 08:02:59 -0500

Gene finding in eukaryotic genomes is notoriously difficult to automate. The task is to design a work flow with a minimal set of tools that would reach state-of-the-art performance across a wide range of species. GeneMark-ET is a gene prediction tool that incorporates RNA-Seq data into unsupervised training and subsequently generates ab initio gene predictions. AUGUSTUS is a gene finder that usually requires supervised training and uses information from RNA-Seq reads in the prediction step. Complementary strengths of GeneMark-ET and AUGUSTUS provided motivation for designing a new combined tool for automatic gene prediction.

http://www.ncbi.nlm.nih.gov/pubmed/26559507

Address of the bookmark: http://bioinf.uni-greifswald.de/bioinf/braker/

transrate: Understanding your transcriptome assembly

Neel — Fri, 13 Jul 2018 07:49:26 -0500

Transrate is software for de-novo transcriptome assembly quality analysis. It examines your assembly in detail and compares it to experimental evidence such as the sequencing reads, reporting quality scores for contigs and assemblies. This allows you to choose between assemblers and parameters, filter out the bad contigs from an assembly, and help decide when to stop trying to improve the assembly.

Address of the bookmark: http://hibberdlab.com/transrate/index.html

NGS Tutorial

Jit — Mon, 05 Sep 2016 09:50:46 -0500

These tutorials are written for hundreds of bioinformaticians trying to cope with large volume of next-generation sequencing (NGS) data. NGS technologies brought a dramatic shift in the world of sequencing. Merely five years back, genome sequencing of higher eukaryotes used to be very expensive endeavor. To get a genome of interest sequenced, hundreds of scientists had to raise funds together by writing a joint white-paper and petitioning to various government agencies. The tasks of sequencing and assembly were handled by dedicated sequencing facilities, of which only a few existed around the globe. Naturally, the capacities at those sequencing facilities were significantly constrained from high volume of requests

Address of the bookmark: http://www.homolog.us/Tutorials/index.php

HaploMerger2: rebuilding both haploid sub-assemblies from high-heterozygosity diploid genome assembly

BioStar — Thu, 27 Sep 2018 07:08:47 -0500

HM2 can process any diploid assemblies, but it is especially suitable for diploid assemblies with high heterozygosity (≥3%), which can be difficult for other tools. This pipeline also implements flexible and sensitive assembly error detection, a hierarchical scaffolding procedure and a reliable gap-closing method for haploid sub-assemblies.

Source code, executables and the testing dataset are freely available at https://github.com/mapleforest/HaploMerger2/releases/.

Address of the bookmark: https://github.com/mapleforest/HaploMerger2/releases/

OPERA : Optimal Paired-End Read Assembler

Jit — Fri, 09 Sep 2016 05:28:58 -0500

OPERA (Optimal Paired-End Read Assembler) is a sequence assembly program (http://en.wikipedia.org/wiki/Sequence_assembly). It uses information from paired-end/mate-pair/long reads to order and orient the intermediate contigs/scaffolds assembled in a genome assembly project, in a process known as Scaffolding. OPERA is based on an exact algorithm that is guaranteed to minimize the discordance of scaffolds with the information provided by the paired-end/mate-pair/long reads (for further details see Gao et al, 2011).

Note that since the original publication, we have made significant changes to OPERA (v1.0 onwards) including refinements to its basic algorithm (to reduce local errors, improve efficiency etc.) and incorporated features that are important for scaffolding large genomes (multi-library support, better repeat-handling etc.), in addition to other scalability and usability improvements (bam and gzip support, smaller memory footprint). We therefore encourage you to download and use our latest version: OPERA-LG. In our benchmarks, it has significantly improved corrected N50 and reduced the number of scaffolding errors. Furthermore, our latest release contains the wrapper script OPERA-long-read that enables scaffolding with long-reads from third-generation sequencing technologies (PacBio or Oxford Nanopore). The manuscript describing the new features and algorithms is available at Genome Biology. We look forward to getting your feedback to improve it further.

Address of the bookmark: https://sourceforge.net/p/operasf/wiki/The%20OPERA%20wiki/

Referee: Genome assembly quality scores

Jit — Sun, 04 Nov 2018 16:44:30 -0600

Modern genome sequencing technologies provide a succint measure of quality at each position in every read, however all of this information is lost in the assembly process. Referee summarizes the quality information from the reads that map to a site in an assembled genome to calculate a quality score for each position in the genome assembly.

We accomplish this by first calculating genotype likelihoods for every site. For a given site in a diploid genome, there are 10 possible genotypes (AA, AC, AG, AT, CC, CG, CT, GG, GT, TT). Referee takes as input the genotype likelihoods calculated for all 10 genotypes given the called reference base at each position.

Referee is a program to calculate a quality score for every position in a genome assembly. This allows for easy filtering of low quality sites for any downstream analysis.

https://github.com/gwct/referee

Address of the bookmark: https://gwct.github.io/referee/#