BOL: Related items

destruct

Jitendra Prajapati — Mon, 29 Feb 2016 17:34:59 -0600

Destruct is a tool for joint prediction of rearrangement breakpoints from single or multiple tumour samples.

More at https://bitbucket.org/dranew/destruct

Address of the bookmark: https://bitbucket.org/dranew/destruct

PhD at INSTITUTE OF LIFE SCIENCES, Bhubaneswar

Mon, 30 May 2016 03:36:04 -0500

INSTITUTE OF LIFE SCIENCES

Bhubaneswar 751023

Advt No. 07/2016

Institute of Life Sciences (ILS), Bhubaneswar, an autonomous Institute of the Department of Biotechnology, Ministry of Science & Technology, Government of India engaged in advanced research invites applications from Indian nationals for the Ph.D. program. The main focus of the projects will be computational biology in the following areas.

S. No. Area of Research Principal investigator

1. Computational Cancer Biology Dr. Anshuman Dixit

2. Immunogenomics & Systems Biology Dr. Sunil Kumar Raghav

3. Chromatin remodeling and hematopoiesis Dr. Punit Prasad

Candidates are strongly encouraged to visit ILS webpage for detailed information, regarding the research activities of the above mentioned scientists.

Essential Qualifications:

(a) Eligibility: M.Sc., M.V.Sc., M.Pharm., M.S. Pharma. (with NET/GATE/GPAT/BINC/any other equivalent national level exam) or M.Tech with minimum of 60% marks (or equivalent grade point). Those awaiting final result may also apply.

Applications received after the last date will not be accepted. The envelope should clearly be superscribed with “Application for Ph.D. program (computational biology)”. Short-listed candidates selected for the interview will be published in the Institute website (www.ils.res.in).

Application Fees: Applicants except SC/ST candidates are required to send a non-refundable D.D. for Rs.100/- in favour of “Director, Institute of Life Sciences, Bhubaneswar” payable at Bhubaneswar along with duly filled-in application form by the date mentioned below. Director, ILS reserves the right to withdraw the procedure without assigning any reasons thereof.

Important dates: 

Last date of receiving applications: 24th June 2016 

Date of display of short-listed candidates and instructions on the Institute website: 30th June 2016 

Date of interview: The interview will be organized on 25th July 2016

Advertisement: https://www.ils.res.in/wp-content/uploads/2016/05/advt07-16.pdf

Professor (all levels) in Bioinformatics and Computational Biology

Tue, 22 Nov 2016 05:43:38 -0600

King Abdullah University of Science and Technology (KAUST) (kaust.edu.sa) is seeking a highly motivated and skilled faculty member for the Bioinformatics track whose research focuses on development of methods and tools for Bioinformatics and Computational Biology.
KAUST is an international, graduate-level research university dedicated to advancing science and technology through interdisciplinary research, education, and innovation. Located on the shores of the Red Sea in Saudi Arabia, KAUST offers superb research facilities, generous assured research funding, and internationally competitive salaries, attracting top international faculty, scientists, engineers, and students to conduct fundamental and goal-oriented research to address the world’s pressing scientific and technological challenges in the areas of food, water, energy, and the environment.
The successful applicant is expected to develop world-leading research in domain of bioinformatics/computational biology with focus on development of novel computational approaches for efficient and accurate methods of analyzing biological phenomena at molecular level. The faculty member will be part of the Computational Bioscience Research Center (CBRC) within the Computer, Electrical and Mathematical Sciences and Engineering (CEMSE) Division. The position will remain open until filled.

Requirements:

PhD or equivalent in a Computer Science, Mathematics or Engineering discipline. Candidates should be well-established within the research field relevant to the position grade. They should demonstrate original research and experience at the highest international level.

Responsibilities and tasks:

Research competence in the following areas is preferred:
Analysis of next generation sequencing (NGS) and other ‘omics’ data (e.g. CAGE, ChIP-Seq, DHS, RNA-Seq, Ribo-Seq, proteomic, metabolic and NMR spectra, etc.).
Signaling, regulatory and metabolic pathways analysis.
Development of tools (web-based and standalone) suited for efficient computational biology/bioinformatics.

Visit cemse.kaust.edu.sa to apply.

Easyfig

Poonam Mahapatra — Fri, 29 Apr 2016 05:49:39 -0500

Easyfig has moved to github, for newer releases of Easyfig please visit our new webpage - https://mjsull.github.io/Easyfig. Easyfig is a Python application for creating linear comparison figures of multiple genomic loci with an easy-to-use graphical user interface (GUI).

More at http://easyfig.sourceforge.net/

Address of the bookmark: http://easyfig.sourceforge.net/

Understanding Fastqc Output

Jit — Fri, 15 Apr 2016 05:47:40 -0500

Understanding Following table and graphs

Duplication level
kmer profile
per base GC content
per base N content
per base quality
per base sequence content
per sequence GC content
per sequence quality
sequence length distribution

More at http://www.bioinformatics.babraham.ac.uk/projects/fastqc/Help/3%20Analysis%20Modules/

Address of the bookmark: http://www.bioinformatics.babraham.ac.uk/projects/fastqc/Help/3%20Analysis%20Modules/

ALE: a Generic Assembly Likelihood Evaluation Framework for Assessing the Accuracy of Genome and Metagenome Assemblies

Neel — Tue, 26 Apr 2016 03:38:43 -0500

Assembly Likelihood Evaluation (ALE) framework that overcomes these limitations, systematically evaluating the accuracy of an assembly in a reference-independent manner using rigorous statistical methods. This framework is comprehensive, and integrates read quality, mate pair orientation and insert length (for paired-end reads), sequencing coverage, read alignment and k-mer frequency. ALE pinpoints synthetic errors in both single and metagenomic assemblies, including single-base errors, insertions/deletions, genome rearrangements and chimeric assemblies presented in metagenomes. At the genome level with real-world data, ALE identifies three large misassemblies from the Spirochaeta smaragdinae finished genome, which were all independently validated by Pacific Biosciences sequencing. At the single-base level with Illumina data, ALE recovers 215 of 222 (97%) single nucleotide variants in a training set from a GC-rich Rhodobacter sphaeroides genome. Using real Pacific Biosciences data, ALE identifies 12 of 12 synthetic errors in a Lambda Phage genome, surpassing even Pacific Biosciences' own variant caller, EviCons. In summary, the ALE framework provides a comprehensive, reference-independent and statistically rigorous measure of single genome and metagenome assembly accuracy, which can be used to identify misassemblies or to optimize the assembly process.

More at http://www.ncbi.nlm.nih.gov/pubmed/23303509

Address of the bookmark: http://sc932.github.io/ALE/about.html

Redundans

Jit — Thu, 01 Sep 2016 08:28:11 -0500

Redundans pipeline assists an assembly of heterozygous genomes.
Program takes as input assembled contigs, paired-end and/or mate pairs sequencing libraries and returns scaffolded homozygous genome assembly, that should be less fragmented and with total size smaller than the input contigs. In addition, Redundans will automatically close the gaps resulting from genome assembly or scaffolding more details.

The pipeline consists of three steps/modules:

redundancy reduction: detection and selectively removal of redundant contigs from an initial de novo assembly
scaffolding: joining of genome fragments using paired-end and/or mate-pairs reads
gap closing

Redundans is:

fast & lightweight, multi-core support and memory-optimised, so it can be run even on the laptop for small-to-medium size genomes
flexible toward many sequencing technologies (Illumina, 454 or Sanger) and library types (paired-end, mate pairs, fosmids)
modular: every step can be ommited or replaced by another tools

Address of the bookmark: https://github.com/Gabaldonlab/redundans

HGA

Jit — Tue, 29 Nov 2016 07:25:53 -0600

HGA tool version 1.0 This tool helps to apply the Hierarchical Genome Assembly (HGA) method. The tool will apply: 1. Partitioning a given reads dataset into a given number of partitions. 2. Assembling each partitions using a pre-specified assembler (Velvet or SPAdes in this version) and using a given kmer size. 3. Merging all the assemblies of the partition. 4. Combining all the assemblies of the partition (using velvet with kmer value of 31). 5. Finaly, re-assembling the whole dataset with the merged contigs or the combined contigs, using a given kmer size.

https://github.com/aalokaily/Hierarchical-Genome-Assembly-HGA

Address of the bookmark: https://github.com/aalokaily/Hierarchical-Genome-Assembly-HGA

Standardized velvet assembly report

Poonam Mahapatra — Fri, 09 Dec 2016 03:59:59 -0600

Requirements:

velvet (velveth velvetg should be in your PATH)
R (with Sweave)
pdflatex (usually part of TeTeX)
ggplot2 (from R prompt type install.packages("ggplot2","proto","xtable"))
Perl

Optional:

BLAT or BLAST (to generate alignments against a reference genome). If using BLAT, add faToTwoBit,gfClient,gfServer to your PATH. If using BLAST, add blastall and formatdb.

Edit permute.sh to your liking, paying particular attention to the kmer, cvCut, expCov, and other flags

To Run:

perl fastaAllSize mysequences.fa > mysequences.stat or gunzip -c mysequences.fa.gz | fastaAllSize > mysequences.stat Substitute fastqAllSize for fastq files.
./permute.sh mysequences (leave out the .fa)

https://github.com/leipzig/standardized-velvet-assembly-report

Address of the bookmark: https://github.com/leipzig/standardized-velvet-assembly-report

ScaffMatch

Jit — Tue, 13 Dec 2016 10:23:56 -0600

caffMatch is a novel scaffolding tool based on Maximum-Weight Matching able to produce high-quality scaffolds from NGS data (reads and contigs). The tool is written in Python 2.7. It also includes a bash script wrapper that calls aligner in case one needs to first map reads to contigs (instead of providing .sam files).

The arguments accepted by ScaffMatch are:

-w) Working directory -- this is the directory where ScaffMatch files are stored. These are .sam files produced after mapping reads to contigs and the resulting scaffolds file `scaffolds.fa` fasta file;

-c) Contig fasta file;

-m) Command line argument with no options. It is used when .sam files are used instead of reads .fastq files. Do not use this option if you provide reads files;

-1) (Comma separated list of) either .fastq or .sam file(s) corresponding to the first read of the read pair;

-2) (Comma separated list of) either .fastq or .sam file(s) corresponding to the second read of the read pair;

-i) (Comma separated list of) insert size(s) of the library(-ies);

-s) (Comma separated list of) library(-ies) standard deviation(s) of insert size(s);

-t) Bundle threshold. Pairs of contigs supported by number of read pairs less than the value of this argument are discarded. Optional argument, by default it is equal to 5;

-g) Matching heuristics: use `max_weight` for Maximum Weight Matching heuristics with the Insertion step, use `backbone` for Maximum Weight Matching heuristics without the Insertion step, use `greedy` for Greedy Matching heuristics;

-l) Log file - where to store the logs. Optional argument. By default, stdout is used.

Address of the bookmark: http://alan.cs.gsu.edu/NGS/?q=content/scaffmatch