BOL: Related items

destruct

Jitendra Prajapati — Mon, 29 Feb 2016 17:34:59 -0600

Destruct is a tool for joint prediction of rearrangement breakpoints from single or multiple tumour samples.

More at https://bitbucket.org/dranew/destruct

Address of the bookmark: https://bitbucket.org/dranew/destruct

PhD at INSTITUTE OF LIFE SCIENCES, Bhubaneswar

Mon, 30 May 2016 03:36:04 -0500

INSTITUTE OF LIFE SCIENCES

Bhubaneswar 751023

Advt No. 07/2016

Institute of Life Sciences (ILS), Bhubaneswar, an autonomous Institute of the Department of Biotechnology, Ministry of Science & Technology, Government of India engaged in advanced research invites applications from Indian nationals for the Ph.D. program. The main focus of the projects will be computational biology in the following areas.

S. No. Area of Research Principal investigator

1. Computational Cancer Biology Dr. Anshuman Dixit

2. Immunogenomics & Systems Biology Dr. Sunil Kumar Raghav

3. Chromatin remodeling and hematopoiesis Dr. Punit Prasad

Candidates are strongly encouraged to visit ILS webpage for detailed information, regarding the research activities of the above mentioned scientists.

Essential Qualifications:

(a) Eligibility: M.Sc., M.V.Sc., M.Pharm., M.S. Pharma. (with NET/GATE/GPAT/BINC/any other equivalent national level exam) or M.Tech with minimum of 60% marks (or equivalent grade point). Those awaiting final result may also apply.

Applications received after the last date will not be accepted. The envelope should clearly be superscribed with “Application for Ph.D. program (computational biology)”. Short-listed candidates selected for the interview will be published in the Institute website (www.ils.res.in).

Application Fees: Applicants except SC/ST candidates are required to send a non-refundable D.D. for Rs.100/- in favour of “Director, Institute of Life Sciences, Bhubaneswar” payable at Bhubaneswar along with duly filled-in application form by the date mentioned below. Director, ILS reserves the right to withdraw the procedure without assigning any reasons thereof.

Important dates: 

Last date of receiving applications: 24th June 2016 

Date of display of short-listed candidates and instructions on the Institute website: 30th June 2016 

Date of interview: The interview will be organized on 25th July 2016

Advertisement: https://www.ils.res.in/wp-content/uploads/2016/05/advt07-16.pdf

Versatile genome assembly evaluation with QUAST-LG

Jit — Fri, 21 Dec 2018 22:06:31 -0600

QUAST-LG is an extension of QUAST intended for evaluating large-scale genome assemblies (up to mammalian-size).

QUAST-LG is included in the QUAST package starting from version 5.0.0 (download the latest release). Run QUAST as usual and do not forget to add ‐‐large option to your command!

A short list of the new features (see CHANGES for all):

Significant speedup achieved by both use of new fast aligner (minimap2) and the refactoring of alignment analyzing modules
New k-mer-based completeness and correctness metrics
BUSCO added for enhanced reference-free analysis
The concept of upper bound assembly (theoretical limits on the assembly completeness and contiguity for a given genome and set of reads)

Address of the bookmark: http://cab.spbu.ru/software/quast-lg/

Software for genome assembly !

LEGE — Sun, 30 Aug 2020 09:51:38 -0500

List of bioinformatics tools/Software Website References for genome assembly:

1 Falcon https://github.com/PacificBiosciences/pb-assembly

2 Canu assembler http://canu.readthedocs.io/en/latest/index.html

3 Miniasm assembler https://github.com/lh3/miniasm

4 PBJelly scaffolding tool https://sourceforge.net/projects/pb-jelly/

5 ARCS scaffolding tool https://github.com/bcgsc/arcs

6 Redundans reduction and scaffolding tool https://github.com/Gabaldonlab/redundans

7 Arrow error correction https://github.com/PacificBiosciences/ GenomicConsensus

8 PILON error correction https://github.com/broadinstitute/pilon/wiki

9 BUSCO single copy gene markers http://busco.ezlab.org/

10 Bandage graph assembly viewer https://rrwick.github.io/Bandage/

11 Gepard dotter http://cube.univie.ac.at/gepard

12 MUMmer aligner and plotter http://mummer.sourceforge.net/

Professor (all levels) in Bioinformatics and Computational Biology

Tue, 22 Nov 2016 05:43:38 -0600

King Abdullah University of Science and Technology (KAUST) (kaust.edu.sa) is seeking a highly motivated and skilled faculty member for the Bioinformatics track whose research focuses on development of methods and tools for Bioinformatics and Computational Biology.
KAUST is an international, graduate-level research university dedicated to advancing science and technology through interdisciplinary research, education, and innovation. Located on the shores of the Red Sea in Saudi Arabia, KAUST offers superb research facilities, generous assured research funding, and internationally competitive salaries, attracting top international faculty, scientists, engineers, and students to conduct fundamental and goal-oriented research to address the world’s pressing scientific and technological challenges in the areas of food, water, energy, and the environment.
The successful applicant is expected to develop world-leading research in domain of bioinformatics/computational biology with focus on development of novel computational approaches for efficient and accurate methods of analyzing biological phenomena at molecular level. The faculty member will be part of the Computational Bioscience Research Center (CBRC) within the Computer, Electrical and Mathematical Sciences and Engineering (CEMSE) Division. The position will remain open until filled.

Requirements:

PhD or equivalent in a Computer Science, Mathematics or Engineering discipline. Candidates should be well-established within the research field relevant to the position grade. They should demonstrate original research and experience at the highest international level.

Responsibilities and tasks:

Research competence in the following areas is preferred:
Analysis of next generation sequencing (NGS) and other ‘omics’ data (e.g. CAGE, ChIP-Seq, DHS, RNA-Seq, Ribo-Seq, proteomic, metabolic and NMR spectra, etc.).
Signaling, regulatory and metabolic pathways analysis.
Development of tools (web-based and standalone) suited for efficient computational biology/bioinformatics.

Visit cemse.kaust.edu.sa to apply.

Bioinformatics tools for genome assembly !

BioStar — Mon, 24 Jul 2023 07:04:26 -0500

There are numerous genome assembly tools available, each with its strengths and weaknesses. Here is a list of some widely used genome assembly tools as of my last update in September 2021:

SPAdes: An assembler specifically designed for single-cell and multi-cell bacterial genomes, as well as small eukaryotic genomes.
ABySS: A parallelized assembler for large genomes that uses de Bruijn graphs.
Velvet: Another de Bruijn graph-based assembler optimized for short-read sequencing data.
SOAPdenovo: A de Bruijn graph-based assembler designed for short reads, widely used for assembling large and complex genomes.
MaSuRCA: A hybrid assembler that combines data from multiple sequencing technologies, such as Illumina and PacBio.
Canu: A long-read assembler optimized for PacBio and Oxford Nanopore sequencing data.
Flye: A long-read assembler suitable for bacterial and small eukaryotic genomes.
SMARTdenovo: An assembler designed for long reads, particularly suited for PacBio data.
SPAdes Long Read (SPAdesLR): An extension of SPAdes for long-read data, such as those from PacBio or Nanopore.
Minia: An assembler optimized for low memory consumption, suitable for small and medium-sized genomes.
Unicycler: A hybrid assembler that combines short and long reads for circular bacterial genome assembly.
wtdbg2: A de Bruijn graph assembler for long reads, efficient for very large genomes.
Shasta: A long-read assembler that uses the Overlap-Layout-Consensus approach, suitable for PacBio and Nanopore data.
Sparc: An assembler designed to handle noisy long reads from Nanopore sequencing.
CANA: An assembler for metagenomic data, particularly for complex and diverse microbial communities.
Ra Assembler: A metagenome assembler for long reads, designed for highly complex metagenomic samples.

Please note that the field of bioinformatics is constantly evolving, and new assembly tools may have emerged since my last update. Additionally, the performance of these tools can vary depending on the characteristics of the sequencing data and the genome being assembled. When selecting an assembly tool, consider the specific requirements of your project, the available data types, and the computational resources at your disposal. Always refer to the respective tool's documentation and publications for the most up-to-date information and recommendations.

Easyfig

Poonam Mahapatra — Fri, 29 Apr 2016 05:49:39 -0500

Easyfig has moved to github, for newer releases of Easyfig please visit our new webpage - https://mjsull.github.io/Easyfig. Easyfig is a Python application for creating linear comparison figures of multiple genomic loci with an easy-to-use graphical user interface (GUI).

More at http://easyfig.sourceforge.net/

Address of the bookmark: http://easyfig.sourceforge.net/

Understanding Fastqc Output

Jit — Fri, 15 Apr 2016 05:47:40 -0500

Understanding Following table and graphs

Duplication level
kmer profile
per base GC content
per base N content
per base quality
per base sequence content
per sequence GC content
per sequence quality
sequence length distribution

More at http://www.bioinformatics.babraham.ac.uk/projects/fastqc/Help/3%20Analysis%20Modules/

Address of the bookmark: http://www.bioinformatics.babraham.ac.uk/projects/fastqc/Help/3%20Analysis%20Modules/

Redundans

Jit — Thu, 01 Sep 2016 08:28:11 -0500

Redundans pipeline assists an assembly of heterozygous genomes.
Program takes as input assembled contigs, paired-end and/or mate pairs sequencing libraries and returns scaffolded homozygous genome assembly, that should be less fragmented and with total size smaller than the input contigs. In addition, Redundans will automatically close the gaps resulting from genome assembly or scaffolding more details.

The pipeline consists of three steps/modules:

redundancy reduction: detection and selectively removal of redundant contigs from an initial de novo assembly
scaffolding: joining of genome fragments using paired-end and/or mate-pairs reads
gap closing

Redundans is:

fast & lightweight, multi-core support and memory-optimised, so it can be run even on the laptop for small-to-medium size genomes
flexible toward many sequencing technologies (Illumina, 454 or Sanger) and library types (paired-end, mate pairs, fosmids)
modular: every step can be ommited or replaced by another tools

Address of the bookmark: https://github.com/Gabaldonlab/redundans

HGA

Jit — Tue, 29 Nov 2016 07:25:53 -0600

HGA tool version 1.0 This tool helps to apply the Hierarchical Genome Assembly (HGA) method. The tool will apply: 1. Partitioning a given reads dataset into a given number of partitions. 2. Assembling each partitions using a pre-specified assembler (Velvet or SPAdes in this version) and using a given kmer size. 3. Merging all the assemblies of the partition. 4. Combining all the assemblies of the partition (using velvet with kmer value of 31). 5. Finaly, re-assembling the whole dataset with the merged contigs or the combined contigs, using a given kmer size.

https://github.com/aalokaily/Hierarchical-Genome-Assembly-HGA

Address of the bookmark: https://github.com/aalokaily/Hierarchical-Genome-Assembly-HGA