More at https://leidosbiomed.csod.com/ats/careersite/jobdetails.aspx?site=4&c=leidosbiomed&id=2040

Address of the bookmark: https://astrobiomike.github.io/

You can add more tutorial links in comments if found new pages.

Address of the bookmark: http://manuals.bioinformatics.ucr.edu/home/R_BioCondManual

WALK-IN-INTERVIEW

A walk-in-Interview is proposed to be held at National Bureau of Animal Genetic Resources, Karnal (Haryana)-132001 at 11:30 AM on 18.12.2013 to select One RA and One SRF as per details given below:

1. One post of Research Associate under DBT sponsored Support under BIPP for the “SanGenix: A comprehensive Next Generation Sequence (NGS) data analysis solution” as Grants in AID. Thepost duration is Upto 31st March 2015 or earlier.

2. One post of Senior Research Fellow under NAIP (Component-4) Bioprospecting of genes and allele mining for abiotic stress tolerance. The post duration is Upto 31st March 2014 or earlier

Essential Qualifications: Ph.D. in Bioinformatics/ Computer Application or
First Class Masters degree in Bioinformatics/ Computer Application with two years experience as evidenced by Publications.

Desirable: Experience in the field of handling Next generation Sequencing Data.

Emolument: Rs. 22,000/- per month + HRA as per admissibility

Age Limit:

40 years for Men
45 years for women as on date of interview

Research Associate: ONE

Duration of engagement: Upto

31st March 2015 or earlier & Coterminus with the project

Responsibilities: To help the PI for Beta testing and development of the SanGenix Tool for NGS data.

Essential Qualifications: First Class Masters’ degree in Bioinformatics/Biotechnology.

Desirable: Experience in the field of Biotechnology/ Bioinformatics

Emoluments:

Rs. 16,000/- per month + HRA as per admissibility.
Senior Research Fellow: ONE
Duration of engagement: Upto 31st March 2014 or earlier & Coterminus with the project

Age Limit

35 years for men
40 years for women as on date of interview

Note: Relaxation in age will be admissible for SC/ST & OBC candidates as per Govt. of India /ICAR norms

1. The applicants must bring with them original documents and brief of research work done during post graduation along with a set of photocopy and latest two passport size photographs.
2. A panel of selected candidates will also be made which may be utilized for filling of positions of shorter durations in future if demand arises.
3. Experience certificate in original, if any 4. The above positions are purely on temporary basis and are co-terminus with the project. No TA/DA will be paid to attend the interview.
5. Any other clarifications can be had on the date of interview.
6. The Director’s decision will be final and binding on all respects.

Advertisement: http://210.212.93.85/rasrfadvertise.pdf

• hist: Create an histogram of k-mer occurrences from a sequence file. Adds metadata in output for easy plotting.
• gcp: K-mer GC Processor. Creates a matrix of the number of K-mers found given a GC count and a K-mer count.
• comp: K-mer comparison tool. Creates a matrix of shared K-mers between two (or three) sequence files or hashes.
• sect: SEquence Coverage estimator Tool. Estimates the coverage of each sequence in a file using K-mers from another sequence file.
• blob: Given, reads and an assembly, calculates both the read and assembly K-mer coverage along with GC% for each sequence in the assembly.SEquence Coverage estimator Tool.
• filter: Filtering tools. Contains tools for filtering k-mer hashes and FastQ/A files:
  • kmer: Produces a k-mer hash containing only k-mers within specified coverage and GC tolerances.
  • seq: Filters a sequence file based on whether or not the sequences contain k-mers within a provided hash.
• plot: Plotting tools. Contains several plotting tools to visualise K-mer and compare distributions. The following plot tools are available:
  • density: Creates a density plot from a matrix created with the "comp" tool. Typically this is used to compare two K-mer hashes produced by different NGS reads.
  • profile: Creates a K-mer coverage plot for a single sequence. Takes in fasta coverage output coverage from the "sect" tool
  • spectra-cn: Creates a stacked histogram using a matrix created with the "comp" tool. Typically this is used to compare a jellyfish hash produced from a read set to a jellyfish hash produced from an assembly. The plot shows the amount of distinct K-mers absent, as well as the copy number variation present within the assembly.
  • spectra-hist: Creates a K-mer spectra plot for a set of K-mer histograms produced either by jellyfish-histo or kat-histo.
  • spectra-mx: Creates a K-mer spectra plot for a set of K-mer histograms that are derived from selected rows or columns in a matrix produced by the "comp".

In addition, KAT contains a python script for analysing the mathematical distributions present in the K-mer spectra in order to determine how much content is present in each peak.

This README only contains some brief details of how to install and use KAT. For more extensive documentation please visit: https://kat.readthedocs.org/en/latest/

https://academic.oup.com/bioinformatics/article/33/4/574/2664339 

Address of the bookmark: https://github.com/TGAC/KAT

Basic Galaxy Tutorial

• RNA-Seq tutorial based on Trapnell et al. (2012) Nature Protocols

In this tutorial we cover the concepts of RNA-Seq differential gene expression (DGE) analysis using a very small synthetic dataset from a well studied organism.

Advanced Galaxy Tutorial

• RNA-Seq (Advanced) Tutorial

In this tutorial we compare the performance of three statistically-based differential expression tools:

* CuffDiff

* EdgeR

* DESeq2

Advanced Command Line Tutorial

• Graphical Output with CummeRbund introduces some basic commands using the cummeRbund package of the R programming language

You will need to install R, RStudio and cummeRbund on your PC (explained in the Tutorial). You will learn how to produce graphical output from RNA-Seq analysis previously done using a Cuffdiff analysis.

Variant Detection

Basic Galaxy Tutorial

• Variant Detection tutorial

In this tutorial we cover the concepts of detecting small variants (SNVs and indels) in human genomic DNA using a small set of reads from chromosome 22.

Advanced Galaxy Tutorial

• Variant Detection (Advanced) Tutorial

In this tutorial we compare the performance of three statistically-based variant detection tools:

* SAMtools: Mpileup

* GATK: Unified Genotyper

* FreeBayes

Each of these tools takes as its input a BAM file of aligned reads and generates a list of likely variants in VCF format

Pipelines are for those who are comfortable with using the UNIX command line; and often allow more control over branching and iteration logic.

• WGS/exome GATK-based variant calling pipeline

This is a basic variant-calling and annotation pipeline developed at the Victorian Life Sciences Computation Initiative (VLSCI), University of Melbourne. It is based around BWA, GATK and ENSEMBL and was originally designed for human (or similar) data. The master branch is configured for WGS data; there is an exome branch configured for variant calling in exome data.

To run the pipeline you will need Rubra: https://github.com/bjpop/rubra. Rubra uses the python Ruffus library: http://www.ruffus.org.uk/.

Protocols

• Familial Variant Calling

In this protocol we discuss and outline the process of calling familial related mutations.

• Somatic Variant Calling

In this protocol we discuss and outline the process of identifying somatic variants or mutations.

Assembly

Basic Galaxy Tutorial

• Genome assembly tutorial

In this tutorial we carry out de novo assembly of a microbial genome. We have also written a De novo Genome Assembly for Illumina Data Protocol for a more generic description of the method.

Protocol

• De novo Genome Assembly for Illumina Data

In this protocol we discuss and outline the process of de novo assembly for small to medium sized genomes. Use our Genome assembly tutorial to learn a specific case of using Galaxy to carry out de novo assembly of a microbial genome.

Small RNAs

Basic Galaxy Tutorial

• Quality control for small RNA

This tutorial covers initial steps of the workflow for analysis of short RNA expression such as a quality control of the raw reads, processing of the raw reads for the subsequent analysis and initial quality assessment of the library.

ChIP Seq

Protocol

• ChIP-Seq

In this protocol we discuss ChIP-Seq: a method to analyze the interaction between proteins and DNA.

Amplicons

Protocol

• Amplicon Alignment

In this protocol we discuss and outline the process of aligning custom amplicons using primers for high precision.

Learn Galaxy

Introduction to Galaxy, for those who are very new to Galaxy.

Using Histories and Workflows, for those with some Galaxy knowledge.

The Galaxy project website has many tutorials and screencasts about using Galaxy and the tools, and developing new tools.

Address of the bookmark: https://genome.edu.au/wiki/Learn

More at http://www.ploscompbiol.org/article/info%3Adoi%2F10.1371%2Fjournal.pcbi.1000369

Address of the bookmark: http://www.ploscompbiol.org/article/info%3Adoi%2F10.1371%2Fjournal.pcbi.1000369

Perl one-liners are small and awesome Perl programs that fit in a single line of code and they do one thing really well. These things include changing line spacing, numbering lines, doing calculations, converting and substituting text, deleting and printing certain lines, parsing logs, editing files in-place, doing statistics, carrying out system administration tasks, updating a bunch of files at once, and many more. Perl one-liners will make you the shell warrior. Anything that took you minutes to solve, will now take you seconds!

perl -pe '$\="\n"'   
#double space a file

perl -pe '$_ .= "\n" unless /^$/'
#double space a file except blank lines

perl -pe '$_.="\n"x7'
#7 space in a line.

perl -ne 'print unless /^$/'
#remove all blank lines

perl -lne 'print if length($_) < 20'
#print all lines with length less than 20.

perl -00 -pe ''
#If there are multiple spaces, delete all leaving one(make the file a single spaced file).

perl -00 -pe '$_.="\n"x4'
#Expand single blank lines into 4 consecutive blank lines

perl -pe '$_ = "$. $_"'
#Number all lines in a file

perl -pe '$_ = ++$a." $_" if /./'
#Number only non-empty lines in a file

perl -ne 'print ++$a." $_" if /./'
#Number and print only non-empty lines in a file

perl -pe '$_ = ++$a." $_" if /regex/'
#Number only lines that match a pattern

perl -ne 'print ++$a." $_" if /regex/'
#Number and print only lines that match a pattern

perl -ne 'printf "%-5d %s", $., $_ if /regex/'
#Left align lines with 5 white spaces if matches a pattern (perl -ne 'printf "%-5d %s", $., $_' : for all the lines)

perl -le 'print scalar(grep{/./}<>)'
#prints the total number of non-empty lines in a file

perl -lne '$a++ if /regex/; END {print $a+0}'
#print the total number of lines that matches the pattern

perl -alne 'print scalar @F'
#print the total number fields(words) in each line.

perl -alne '$t += @F; END { print $t}'
#Find total number of words in the file

perl -alne 'map { /regex/ && $t++ } @F; END { print $t }'
#find total number of fields that match the pattern

perl -lne '/regex/ && $t++; END { print $t }'
#Find total number of lines that match a pattern

perl -le '$n = 20; $m = 35; ($m,$n) = ($n,$m%$n) while $n; print $m'
#will calculate the GCD of two numbers.

perl -le '$a = $n = 20; $b = $m = 35; ($m,$n) = ($n,$m%$n) while $n; print $a*$b/$m'
#will calculate lcd of 20 and 35.

perl -le '$n=10; $min=5; $max=15; $, = " "; print map { int(rand($max-$min))+$min } 1..$n'
#Generates 10 random numbers between 5 and 15.

perl -le 'print map { ("a".."z",”0”..”9”)[rand 36] } 1..8'
#Generates a 8 character password from a to z and number 0 – 9.

perl -le 'print map { ("a",”t”,”g”,”c”)[rand 4] } 1..20'
#Generates a 20 nucleotide long random residue.

perl -le 'print "a"x50'
#generate a string of ‘x’ 50 character long

perl -le 'print join ", ", map { ord } split //, "hello world"'
#Will print the ascii value of the string hello world.

perl -le '@ascii = (99, 111, 100, 105, 110, 103); print pack("C*", @ascii)'
#converts ascii values into character strings.

perl -le '@odd = grep {$_ % 2 == 1} 1..100; print "@odd"'
#Generates an array of odd numbers.

perl -le '@even = grep {$_ % 2 == 0} 1..100; print "@even"'
#Generate an array of even numbers

perl -lpe 'y/A-Za-z/N-ZA-Mn-za-m/' file
#Convert the entire file into 13 characters offset(ROT13)

perl -nle 'print uc'
#Convert all text to uppercase:

perl -nle 'print lc'
#Convert text to lowercase:

perl -nle 'print ucfirst lc'
#Convert only first letter of first word to uppercas

perl -ple 'y/A-Za-z/a-zA-Z/'
#Convert upper case to lower case and vice versa

perl -ple 's/(\w+)/\u$1/g'
#Camel Casing

perl -pe 's|\n|\r\n|'
#Convert unix new lines into DOS new lines:

perl -pe 's|\r\n|\n|'
#Convert DOS newlines into unix new line

perl -pe 's|\n|\r|'
#Convert unix newlines into MAC newlines:

perl -pe '/regexp/ && s/foo/bar/'
#Substitute a foo with a bar in a line with a regexp.

Reference/Sources:

http://genomics-array.blogspot.in/2010/11/some-unixperl-oneliners-for.html

http://genomespot.blogspot.com/2013/08/a-selection-of-useful-bash-one-liners.html

http://biowize.wordpress.com/2012/06/15/command-line-magic-for-your-gene-annotations/

http://genomics-array.blogspot.com/2010/11/some-unixperl-oneliners-for.html

http://bioexpressblog.wordpress.com/2013/04/05/split-multi-fasta-sequence-file/

Reference

Cuccuru G1, Orsini M, Pinna A, Sbardellati A, Soranzo N, Travaglione A, Uva P, Zanetti G, Fotia G. (2014) Orione, a web-based framework for NGS analysis in microbiology. Bioinformatics [Epub ahead of print]. [article]

Address of the bookmark: http://orione.crs4.it/