BOL: Related items

CIRCOS Visualize !!

Jit — Fri, 02 Sep 2016 08:29:26 -0500

Before uploading a data file, check the samples gallery to make sure that your data format is compatible.

Your file must be plain text.
Your data values must be non-negative integers.
Data must be space-separated (one or more tab or space, which will be collapsed).
No two rows or columns may have the same name.
Column and row names must begin with a letter (e.g. 'A', 'A0', 'A-0') and can only contain letters, numbers and _. No punctuation!
Maximum row + column total is 150 — if exceeded, rows and columns are limited to 75.
If you are using order, size and color rows/columns in combination they must appear in that order.

Need help? Post questions to the Circos Google Group.

http://mkweb.bcgsc.ca/tableviewer/visualize/

Address of the bookmark: http://mkweb.bcgsc.ca/tableviewer/visualize/

EAGLER: a scaffolding tool for long reads.

Jit — Mon, 04 Jun 2018 05:26:03 -0500

EAGLER is a scaffolding tool for long reads. The scaffolder takes as input a draft genome created by any NGS assembler and a set of long reads. The long reads are used to extend the contigs present in the NGS draft and possibly join overlapping contigs. EAGLER supports both PacBio and Oxford Nanopore reads.

The tool should be compatible with most UNIX flavors and has been successfully tested on the following operating systems:

Mac OS X 10.11.1
Mac OS X 10.10.3
Ubuntu 14.04 LTS

https://bib.irb.hr/datoteka/844447.Diplomski_2015_Luka_terbi.pdf

Address of the bookmark: https://github.com/mculinovic/EAGLER

Sybil

Jit — Wed, 07 Sep 2016 03:20:44 -0500

The Sybil software package provides a primarily web-based front-end to comparative genome datasets warehoused in a chado relational database. It was developed by the bioinformatics department at The Institute for Genomic Research (TIGR) and development continues at the J. Craig Venter Institute (JCVI) and the Institute for Genome Sciences (IGS) at the University of Maryland: Baltimore. Sybil has been used at TIGR/JCVI, IGS, NYU, New York Medical College, Novartis Vaccines and University of Maryland: College Park to support a number of research projects that involve comparative genome analysis. The following sections provide some high-level technical details about the overall architecture and external dependencies of the Sybil package.

Address of the bookmark: http://sybil.sourceforge.net/

Nanopolis: polish a genome assembly

Rahul Nayak — Thu, 26 Jul 2018 04:51:28 -0500

Software package for signal-level analysis of Oxford Nanopore sequencing data. Nanopolish can calculate an improved consensus sequence for a draft genome assembly, detect base modifications, call SNPs and indels with respect to a reference genome and more (see Nanopolish modules, below).

Quickstart

http://nanopolish.readthedocs.io/en/latest/quickstart_consensus.html

Algorithms

http://simpsonlab.github.io/2017/06/30/nanopolish-v0.7.0/

Address of the bookmark: https://github.com/jts/nanopolish

CANU genome assembly parameters !

Rahul Nayak — Mon, 07 Jan 2019 08:40:37 -0600

Choose the appropriate parameters to run Canu and run it. The assembly will take about an hour. You can use two cores (parameter -maxThreads=2) and you would like to disable cluster option, since we compute on a single Amazon server set off the option to compute on cluster useGrid=false. This specifications should be for your project discussed with a local computing guru. The parameters that are in square brackets [] are optional, symbol | stands for "or".

usage:   canu [-correct | -trim | -assemble | -trim-assemble] \
              [-s ] \
               -p  \
               -d  \
               genomeSize=[g|m|k] \
               -maxThreads=2 \
               useGrid=false \
              [other-options] \
               read_file.fastq.gz

A default Canu run produces usually high quality assembly, example of a command that was used for testing can be found below. However, there are still a lot of parameters that are possible to tweak. For example if we desire to assemble haplotypes separately of if we want to smash them together, we can alternate the error correction process.

canu -p test_asmbl \
     -d asm_test3 \
     genomeSize=2m \
     -maxThreads=2 useGrid=false \
     -pacbio-raw \ ~/pacbio/dna/sample_reads.fastq.gz

There is a brilliant section in documentation about parameter tweaking.

The output directory contains will contain many files. The most interesting ones are:

*.correctedReads.fasta.gz : file containing the input sequences after correction, trim and split based on consensus evidence.
*.trimmedReads.fastq : file containing the sequences after correction and final trimming
*.layout : file containing informations about read inclusion in the final assembly
*.gfa : file containing the assembly graph by Canu
*.contigs.fasta : file containing everything that could be assembled and is part of the primary assembly

The basic stats of assembly can be read from reports generated by the assembler, or calculated using standard UNIX command line tools.

More at https://canu.readthedocs.io/en/latest/faq.html

GenomeScope: open-source web tool to rapidly estimate the overall characteristics of a genome, including genome size, heterozygosity rate, and repeat content from unprocessed short reads

Jit — Fri, 21 Oct 2016 05:46:43 -0500

Summary: GenomeScope is an open-source web tool to rapidly estimate the overall characteristics of a genome, including genome size, heterozygosity rate, and repeat content from unprocessed short reads. These features are essential for studying genome evolution, and help to choose parameters for downstream analysis. We demonstrate its accuracy on 324 simulated and 16 real datasets with a wide range in genome sizes, heterozygosity levels, and error rates. Availability and Implementation: http://qb.cshl.edu/genomescope/, https://github.com/schatzlab/genomescope.git

Address of the bookmark: http://qb.cshl.edu/genomescope/

NxRepair: error correction in de novo assemblies using Nextera Mate Pair Reads

BioStar — Thu, 24 Jan 2019 10:35:12 -0600

NxRepair is a python module that automatically detects large structural errors in de novo assemblies using Nextera mate pair reads. The decector will break a contig at the site of an identified misassembly and will generate a new fasta file containing both the corrected contigs and the correct, unaffected contigs.

https://nxrepair.readthedocs.io/en/latest/tutorial.html

nxrepair aligned_matepairs.bam assemblyfasta.fasta error_locations.csv new_fasta.fasta

Address of the bookmark: https://github.com/rebeccaroisin/nxrepair

Statistics Using R with Biological Examples

Neel — Thu, 03 Nov 2016 04:55:41 -0500

This book is a manifestation of my desire to teach researchers in biology a bit more about statistics than an ordinary introductory course covers and to introduce the utilization of R as a tool for analyzing their data. My goal is to reach those with little or no training in higher level statistics so that they can do more of their own data analysis, communicate more with statisticians, and appreciate the great potential statistics has to offer as a tool to answer biological questions.

This is necessary in light of the increasing use of higher level statistics in biomedical research. I hope it accomplishes this mission and encourage its free distribution and use as a course text or supplement.

K Seefeld, May 2007

Software for genome assembly !

LEGE — Sun, 30 Aug 2020 09:51:38 -0500

List of bioinformatics tools/Software Website References for genome assembly:

1 Falcon https://github.com/PacificBiosciences/pb-assembly

2 Canu assembler http://canu.readthedocs.io/en/latest/index.html

3 Miniasm assembler https://github.com/lh3/miniasm

4 PBJelly scaffolding tool https://sourceforge.net/projects/pb-jelly/

5 ARCS scaffolding tool https://github.com/bcgsc/arcs

6 Redundans reduction and scaffolding tool https://github.com/Gabaldonlab/redundans

7 Arrow error correction https://github.com/PacificBiosciences/ GenomicConsensus

8 PILON error correction https://github.com/broadinstitute/pilon/wiki

9 BUSCO single copy gene markers http://busco.ezlab.org/

10 Bandage graph assembly viewer https://rrwick.github.io/Bandage/

11 Gepard dotter http://cube.univie.ac.at/gepard

12 MUMmer aligner and plotter http://mummer.sourceforge.net/

PRISM

Jit — Sat, 10 Dec 2016 15:19:40 -0600

PRISM is a software for split read (reads which span across a structrual variant -- SV ) mapping and SV calling from the mapping result. PRISM is able to detect small insertions and abitrary size deletions, inversions and tandom duplications with the direction of discordant read pairs. PRISM_CTX is a tool for detecting inter-chromosome trans-location events.

PRISM and PRISM_CTX were originally designed and written by Michael Brudno and Yue Jiang, The original PRISM publication can be found here.

The authors may be contacted via e-mail at: prism at cs.toronto.edu.

Additional information is available in the PRISM README file and PRISM_CTX README file.

http://compbio.cs.toronto.edu/prism/

Address of the bookmark: http://compbio.cs.toronto.edu/prism/