BOL: Related items

Flye: Fast and accurate de novo assembler for single molecule sequencing reads

Rahul Nayak — Sat, 06 Jul 2019 03:48:22 -0500

Flye is a de novo assembler for single molecule sequencing reads, such as those produced by PacBio and Oxford Nanopore Technologies. It is designed for a wide range of datasets, from small bacterial projects to large mammalian-scale assemblies. The package represents a complete pipeline: it takes raw PB / ONT reads as input and outputs polished contigs. Flye also includes a special mode for metagenome assembly.

Address of the bookmark: https://github.com/fenderglass/Flye

MEGADOCK 4.0

Suleman Khan — Thu, 07 Aug 2014 18:08:54 -0500

An ultra–high-performance protein–protein docking software for heterogeneous supercomputers

Summary: The application of protein–protein docking in large-scale interactome analysis is a major challenge in structural bioinformatics and requires huge computing resources. In this work, we present MEGADOCK 4.0, an FFT-based docking software that makes extensive use of recent heterogeneous supercomputers and shows powerful, scalable performance of over 97% strong scaling.

Availability and Implementation: MEGADOCK 4.0 is written in C++ with OpenMPI and NVIDIA CUDA 5.0 (or later) and is freely available to all academic and non-profit users at: http://www.bi.cs.titech.ac.jp/megadock.

Contact: akiyama@cs.titech.ac.jp

Address of the bookmark: http://bioinformatics.oxfordjournals.org/content/early/2014/08/06/bioinformatics.btu532.short

Deepbinner: a signal-level demultiplexer for Oxford Nanopore reads

Jit — Mon, 10 Feb 2020 02:45:53 -0600

Deepbinner is a tool for demultiplexing barcoded Oxford Nanopore sequencing reads. It does this with a deep convolutional neural network classifier, using many of the architectural advances that have proven successful in image classification. Unlike other demultiplexers (e.g. Albacore and Porechop), Deepbinner identifies barcodes from the raw signal (a.k.a. squiggle) which gives it greater sensitivity and fewer unclassified reads.

Address of the bookmark: https://github.com/rrwick/Deepbinner

GrapheR !!!

John Parker — Thu, 14 Aug 2014 14:02:17 -0500

What a wonderful gem GrapheR is.... Oh yes it is. GrapheR is a GUI for base graphics in R by http://www.maximeherve.com/. The package provides a graphical user interface for creating base charts in R. It is ideal for beginners in R, as the user interface is very clear and the code is written along side into a text file, allowing users to recreate the charts directly in the console.

Adding and changing legends? Messing around with the plotting window settings? It is much easier/quicker with this GUI than reading the help file and trying to understand the various parameters.
Here is a little example using the iris data set.

library(GrapheR)
data(iris)
run.GrapheR()

This will bring up a window that helps me to create the chart and tweak the various parameters.

Finally, I find the underlying R code in a file created by GrapheR. For more details read also the package vignette, which is available in English, French and German!

SqueezeMeta: a fully automated metagenomics pipeline, from reads to bins

BioStar — Mon, 17 Aug 2020 05:25:10 -0500

SqueezeMeta is a full automatic pipeline for metagenomics/metatranscriptomics, covering all steps of the analysis. SqueezeMeta includes multi-metagenome support allowing the co-assembly of related metagenomes and the retrieval of individual genomes via binning procedures. Thus, SqueezeMeta features several unique characteristics:

Co-assembly procedure with read mapping for estimation of the abundances of genes in each metagenome
Co-assembly of a large number of metagenomes via merging of individual metagenomes
Includes binning and bin checking, for retrieving individual genomes
The results are stored in a database, where they can be easily exported and shared, and can be inspected anywhere using a web interface.
Internal checks for the assembly and binning steps inform about the consistency of contigs and bins, allowing to spot potential chimeras.
Metatranscriptomic support via mapping of cDNA reads against reference metagenomes

Address of the bookmark: https://github.com/jtamames/SqueezeMeta

pybedtools

Shruti Paniwala — Wed, 20 Aug 2014 01:03:41 -0500

pybedtools is a Python wrapper for Aaron Quinlan's BEDtools programs (https://github.com/arq5x/bedtools), which are widely used for genomic interval manipulation or "genome algebra". pybedtools extends BEDTools by offering feature-level manipulations from with Python. See full online documentation, including installation instructions, at http://pythonhosted.org/pybedtools/.

More at http://pythonhosted.org/pybedtools/

A powerful toolset for genome arithmetic.http://code.google.com/p/bedtools/

AlignGraph2: similar genome-assisted reassembly pipeline for PacBio long reads

Rahul Nayak — Sun, 14 Mar 2021 09:42:47 -0500

AlignGraph2 is the second version of AlignGraph for PacBio long reads. It extends and refines contigs assembled from the long reads with a published genome similar to the sequencing genome.

More at https://academic.oup.com/bib/advance-article-abstract/doi/10.1093/bib/bbab022/6146772

Address of the bookmark: https://github.com/huangs001/AlignGraph2

HairSplitter: assembling long reads in an unknown number of haplotypes

BioStar — Wed, 07 Dec 2022 00:13:40 -0600

Pros and cons of HairSplitter Limitations of HairSplitter:

Not very fast: it re-polishes the whole assembly

Limited in the number of haplotypes

Strengths of HairSplitter:

Very modular, can be used with any assembler

Naive: makes no assumption on ploidy, parameter-free

Safe: won’t artificially duplicate contigs

HairSplitter splits collapsed assemblies from “draft” assemblies obtained by any means

HairSplitter can recover haplotypes and distinguish repeated elements

Only needs sequencing reads, potentially error-prone

HairSplitter splits collapsed assemblies from “draft” assemblies obtained by any means

HairSplitter can recover haplotypes and distinguish repeated elements

Only needs sequencing reads, potentially error-prone

Not really available yet (github.com/RolandFaure/HairSplitter)

https://hal.archives-ouvertes.fr/hal-03864075/file/RolandFaure_presentation_SeqBIM_2022.pdf

Address of the bookmark: https://hal.archives-ouvertes.fr/hal-03817928/document

Bioinformatics JRF/SRF position at IARI

Thu, 04 Sep 2014 04:14:01 -0500

DIVISION OF NEMATOLOGY
INDIAN AGRICULTURAL RESEARCH INSTITUTE
NEW DELHI 110012
Applications are invited for the posts of one Junior
Research Fellow and one RA in the DBT funded project entitled “ Plant parasitic nematode genome informatics - insilico resource development”. The project is for a period of three years.

Essential qualifications for JRF
: M. Sc. in Bioinformatics with experience in Proteomics, genomics and structural biology. Knowledge of programming language, pearl and database – HTML, CSS,php and Java script.
Essential qualifications for Research Associate:
MSc/MTech in Bioinformatics with three years experience or Ph.D in Bioinformatics with experience in proteomics, genomics and structural biology. Knowledge of programming language, perl and database
– HTML, CSS, Java script. NGS sequence assembly and analysis and algorithm designing.
Age limit : 35 years maximum (5 year relaxation for SC/ST and women candidates)
Emoluments:
JRF: 16,000 + 30% HRA
.
Res Assoc: Rs22,000 + 30% HRA
The post is purely temporary in nature and is co-terminus with the project. The appointment would be initially for one year and may be extended further upon satisfactory performance.
Interested candidates
should send the duly filled application forms (format in the following page ) so as to reach on or before 20.9.2014 along with all the relevant documents.

More at http://www.iari.res.in/files/JRF_RA-03092014-20140903-135319.pdf

Jabba: Hybrid Error Correction for Long Sequencing Reads

Jit — Fri, 05 Jan 2018 03:58:14 -0600

Jabba is a hybrid error correction tool to correct third generation (PacBio / ONT) sequencing data, using second generation (Illumina) data.

Input

Jabba takes as input a concatenated de Bruijn graph and a set of sequences:

the de Bruijn graph should appear in fasta format with 1 entry per node, the meta information should be in the format:
>NODE
the set of sequences should be in fasta or fastq format. These sequences will be corrected (e.g. PacBio reads). The corrections will be written to a file Jabba fasta.
The output is a file in fasta format with corrections of the long reads, and additionally a file in the input format containing uncorrected reads.

https://github.com/biointec/jabba/wiki

https://almob.biomedcentral.com/articles/10.1186/s13015-016-0075-7

Address of the bookmark: https://github.com/biointec/jabba