BOL: Related items

ART: Set of Simulation Tools

Jit — Thu, 03 Nov 2016 08:28:25 -0500

ART is a set of simulation tools to generate synthetic next-generation sequencing reads. ART simulates sequencing reads by mimicking real sequencing process with empirical error models or quality profiles summarized from large recalibrated sequencing data. ART can also simulate reads using user own read error model or quality profiles. ART supports simulation of single-end, paired-end/mate-pair reads of three major commercial next-generation sequencing platforms: Illumina's Solexa, Roche's 454 and Applied Biosystems' SOLiD. ART can be used to test or benchmark a variety of method or tools for next-generation sequencing data analysis, including read alignment, de novo assembly, SNP and structure variation discovery. ART was used as a primary tool for the simulation study of the 1000 Genomes Project . ART is implemented in C++ with optimized algorithms and is highly efficient in read simulation. ART outputs reads in the FASTQ format, and alignments in the ALN format. ART can also generate alignments in the SAM alignment or UCSC BED file format. ART can be used together with genome variants simulators (e.g. VarSim) for evaluating variant calling tools or methods.

Address of the bookmark: http://www.niehs.nih.gov/research/resources/software/biostatistics/art/

SPAdes

Abhimanyu Singh — Tue, 19 Apr 2016 08:37:08 -0500

SPAdes – St. Petersburg genome assembler – is intended for both standard isolates and single-cell MDA bacteria assemblies. This manual will help you to install and run SPAdes. SPAdes version 3.7.1 was released under GPLv2 on March 8, 2016 and can be downloaded from http://bioinf.spbau.ru/en/spades.

Manual at http://spades.bioinf.spbau.ru/release3.7.1/manual.html

Address of the bookmark: http://bioinf.spbau.ru/spades

Hagfish - assess an assembly through creative use of coverage plots

Abhi — Fri, 20 May 2016 19:08:17 -0500

Hagfish is a tool that is to be used in data analysis of Next Generation Sequencing (NGS) experiments. Hagfish builds on the concept of coverage plots and aims to assist (amongst others) in quality control of de novo genome assembly or identification of structural variation in a genome re-sequencing experiment.

Hagfish requires a reference sequence and a paired end re-sequencing data set. Hagfish has more power the larger the insert size of the paired end library is.

Quick links: Installation,Operation, Read mappers, Hagfish scripts, Hagfish plots

Address of the bookmark: https://github.com/mfiers/hagfish

CABOG: Celera Assembler with Best Overlap Graph

Abhimanyu Singh — Mon, 15 May 2017 05:04:39 -0500

CABOG (Celera Assembler with Best Overlap Graph) is scientific software for DNA research. CABOG has been a critical component of many genome sequencing projects. CABOG operates on small genomes such as bacterial as well as large genomes such as mammalian. CABOG is an extension of the Celera Assembler software that was originally developed at Celera for the 2001 publication of the first draft human genome sequence. The software was released to the public domain in 2004. Its open source repository on Source Forge is an internet resource for scientists around the world.

CABOG is one of many software programs called genome assemblers. These programs exist to overcome the fundamental limitation of all sequencing machines, namely, that they read out very few DNA letters at a time. These programs reconstruct genomes that are billions of letters long from the hundreds of letters per read that modern sequencers provide. What these programs do is often described as a scaled up version of a family solving a jigsaw puzzle.

The CABOG software was the first to accomplish many scientific goals. It was the first to assemble the genome of a multicellular organism (Drosophila melanogaster, 2000). It was the first to assemble both parental haplotypes of one human genome (J. Craig Venter, 2007). It was the first to assemble environmental sequence from the oceans (Sargasso Sea in 2004 and Global Ocean Sampling in 2007). It was first to combine reads from first-generation Sanger sequencing machines and second-generation pyrosequencing machines (Marine microbes, 2006). Today, CABOG is one of the leading assembly programs for data sets that include paired end data from the Roche 454 line of sequencing machines.

Address of the bookmark: http://www.jcvi.org/cms/research/projects/cabog/overview/

segemehl

Anjana — Tue, 10 May 2016 08:10:15 -0500

segemehl is a software to map short sequencer reads to reference genomes. Unlike other methods, segemehl is able to detect not only mismatches but also insertions and deletions. Furthermore, segemehl is not limited to a specific read length and is able to map primer- or polyadenylation contaminated reads correctly. segemehl implements a matching strategy based on enhanced suffix arrays (ESA).

More at http://www.bioinf.uni-leipzig.de/Software/segemehl/

Manual http://www.bioinf.uni-leipzig.de/Software/segemehl/segemehl_manual_0_1_7.pdf

Address of the bookmark: http://hoffmann.bioinf.uni-leipzig.de/LIFE/segemehl.html

Maq: Mapping and Assembly with Quality

Jit — Tue, 22 Nov 2016 04:51:39 -0600

Maq stands for Mapping and Assembly with Quality It builds assembly by mapping short reads to reference sequences. Maq is a project hosted by SourceForge.net. The project page is available athttp://sourceforge.net/projects/maq/. Maq is previously known as mapass2.

Run Maq Now

Follow these steps to try Maq. All you need is a reference sequence file in the FASTA format.

Prepare a reference sequence (ref.fasta). Better a bacterial genome.
Download maq, maq-data and maqview at the download page.
Copy maq, maq.pl and maq_eval.pl to the $PATH or to the same directory.
Simulate diploid reference and read sequences, map reads, call variants and evaluate the results in one go:
```
maq.pl demo ref.fasta calib-30.dat
```
where calib-30.dat is contained in maq-data.

View the alignment:

cd maqdemo/easyrun;
maqindex -i -c consensus.cns all.map;
maqview -c consensus.cns all.map

Even for advanced maq users, running `maq.pl demo' is recommended. You may find something helpful.

Address of the bookmark: http://maq.sourceforge.net

Understanding Fastqc Output

Jit — Fri, 15 Apr 2016 05:47:40 -0500

Understanding Following table and graphs

Duplication level
kmer profile
per base GC content
per base N content
per base quality
per base sequence content
per sequence GC content
per sequence quality
sequence length distribution

More at http://www.bioinformatics.babraham.ac.uk/projects/fastqc/Help/3%20Analysis%20Modules/

Address of the bookmark: http://www.bioinformatics.babraham.ac.uk/projects/fastqc/Help/3%20Analysis%20Modules/

CANU: Assembling Large Genomes with Single-Molecule Sequencing and Locality Sensitive Hashing.

Jit — Tue, 26 Apr 2016 11:38:10 -0500

Canu is a fork of the Celera Assembler designed for high-noise single-molecule sequencing (such as the PacBio RSII or Oxford Nanopore MinION). The software is currently alpha level, feel free to use and report issues encountered.

Canu is a hierachical assembly pipeline which runs in four steps:

Detect overlaps in high-noise sequences using MHAP
Generate corrected sequence consensus
Trim corrected sequences
Assemble trimmed corrected sequences

Read the documentation

New release https://github.com/marbl/canu/releases

Address of the bookmark: https://github.com/marbl/canu

Jvarkit : Java utilities for Bioinformatics

Jit — Fri, 08 Jun 2018 09:31:55 -0500

Collection of Java tool kits for bioinformatics works: Jvarkit : Java utilities for Bioinformatics

Address of the bookmark: http://lindenb.github.io/jvarkit/

cutadapt

Radha Agarkar — Fri, 13 May 2016 04:54:50 -0500

Cutadapt finds and removes adapter sequences, primers, poly-A tails and other types of unwanted sequence from your high-throughput sequencing reads.

Cleaning your data in this way is often required: Reads from small-RNA sequencing contain the 3’ sequencing adapter because the read is longer than the molecule that is sequenced. Amplicon reads start with a primer sequence. Poly-A tails are useful for pulling out RNA from your sample, but often you don’t want them to be in your reads.

Cutadapt helps with these trimming tasks by finding the adapter or primer sequences in an error-tolerant way. It can also modify and filter reads in various ways. Adapter sequences can contain IUPAC wildcard characters. Also, paired-end reads and even colorspace data is supported. If you want, you can also just demultiplex your input data, without removing adapter sequences at all.

Cutadapt comes with an extensive suite of automated tests and is available under the terms of the MIT license.

If you use cutadapt, please cite DOI:10.14806/ej.17.1.200 .

Address of the bookmark: https://cutadapt.readthedocs.io/en/stable/installation.html#quickstart