BOL: Related items

MECAT: fast mapping, error correction, and de novo assembly for single-molecule sequencing reads

Rahul Nayak — Fri, 11 May 2018 05:07:45 -0500

MECAT is an ultra-fast Mapping, Error Correction and de novo Assembly Tools for single molecula sequencing (SMRT) reads. MECAT employs novel alignment and error correction algorithms that are much more efficient than the state of art of aligners and error correction tools. MECAT can be used for effectively de novo assemblying large genomes. For example, on a 32-thread computer with 2.0 GHz CPU , MECAT takes 9.5 days to assemble a human genome based on 54x SMRT data, which is 40 times faster than the current PBcR-Mhap pipeline. MECAT performance were compared with PBcR-Mhap pipeline, FALCON and Canu(v1.3) in five real datasets. The quality of assembled contigs produced by MECAT is the same or better than that of the PBcR-Mhap pipeline and FALCON.

https://www.nature.com/articles/nmeth.4432

Address of the bookmark: https://github.com/xiaochuanle/MECAT

assemblytics: delta file to analyze alignments of an assembly to another assembly or a reference genome

Jit — Thu, 14 Jun 2018 07:31:00 -0500

Download and install MUMmer Align your assembly to a reference genome using nucmer (from MUMmer package) $ nucmer -maxmatch -l 100 -c 500 REFERENCE.fa ASSEMBLY.fa -prefix OUT Consult the MUMmer manual if you encounter problems Optional: Gzip the delta file to speed up upload (usually 2-4X faster) $ gzip OUT.delta Then use the OUT.delta.gz file for upload. Upload the .delta or delta.gz file (view example) to Assemblytics Important: Use only contigs rather than scaffolds from the assembly. This will prevent false positives when the number of Ns in the scaffolded sequence does not match perfectly to the distance in the reference. The unique sequence length required represents an anchor for determining if a sequence is unique enough to safely call variants from, which is an alternative to the mapping quality filter for read alignment. http://assemblytics.com/

Address of the bookmark: http://assemblytics.com/

DECIPHER

Anjana — Fri, 30 Sep 2016 09:33:12 -0500

DECIPHER is a software toolset that can be used to maintain, analyze, and decipher large amounts of DNA sequence data. To install DECIPHER, see the Downloads page.

To begin using DECIPHER read the "Getting Started DECIPHERing" tutorial. Refer to the PDF documents below for instructions on how to use DECIPHER for various tasks.

Address of the bookmark: http://decipher.cee.wisc.edu/Documentation.html

HaploMerger2: rebuilding both haploid sub-assemblies from high-heterozygosity diploid genome assembly

BioStar — Thu, 27 Sep 2018 07:08:47 -0500

HM2 can process any diploid assemblies, but it is especially suitable for diploid assemblies with high heterozygosity (≥3%), which can be difficult for other tools. This pipeline also implements flexible and sensitive assembly error detection, a hierarchical scaffolding procedure and a reliable gap-closing method for haploid sub-assemblies.

Source code, executables and the testing dataset are freely available at https://github.com/mapleforest/HaploMerger2/releases/.

Address of the bookmark: https://github.com/mapleforest/HaploMerger2/releases/

Beagle

Jit — Thu, 27 Oct 2016 11:19:00 -0500

Beagle is a software package that performs genotype calling, genotype phasing, imputation of ungenotyped markers, and identity-by-descent segment detection.

Beagle version 4.1 has a more accurate genotype phasing algorithm and a very fast and accurate genotype imputation algorithm. Version 4.1 also has several changes to the command line arguments which are described in the release notes. The "ped" argument has no effect in version 4.1. If your data contains nuclear families and you want to model the parent-offspring relationships when phasing genotypes, please use version 4.0.

If you use Beagle 4.1 in a published analysis, please report the program version and cite the appropriate article.

The citation for Beagle's phasing algorithm is:

S R Browning and B L Browning (2007) Rapid and accurate haplotype phasing and missing data inference for whole genome association studies by use of localized haplotype clustering. Am J Hum Genet 81:1084-1097.doi:10.1086/521987

The citation for Beagle's genotype imputation algorithm is:

B L Browning and S R Browning (2016). Genotype imputation with millions of reference samples. Am J Hum Genet 98:116-126.doi:10.1016/j.ajhg.2015.11.020

The citation for Beagle's IBD detection algorithm is:

B L Browning and S R Browning (2013). Improving the accuracy and efficiency of identity-by-descent detection in population data. Genetics 194(2):459-71.doi:10.1534/genetics.113.150029

Address of the bookmark: http://faculty.washington.edu/browning/beagle/beagle.html

ART: Set of Simulation Tools

Jit — Thu, 03 Nov 2016 08:28:25 -0500

ART is a set of simulation tools to generate synthetic next-generation sequencing reads. ART simulates sequencing reads by mimicking real sequencing process with empirical error models or quality profiles summarized from large recalibrated sequencing data. ART can also simulate reads using user own read error model or quality profiles. ART supports simulation of single-end, paired-end/mate-pair reads of three major commercial next-generation sequencing platforms: Illumina's Solexa, Roche's 454 and Applied Biosystems' SOLiD. ART can be used to test or benchmark a variety of method or tools for next-generation sequencing data analysis, including read alignment, de novo assembly, SNP and structure variation discovery. ART was used as a primary tool for the simulation study of the 1000 Genomes Project . ART is implemented in C++ with optimized algorithms and is highly efficient in read simulation. ART outputs reads in the FASTQ format, and alignments in the ALN format. ART can also generate alignments in the SAM alignment or UCSC BED file format. ART can be used together with genome variants simulators (e.g. VarSim) for evaluating variant calling tools or methods.

Address of the bookmark: http://www.niehs.nih.gov/research/resources/software/biostatistics/art/

R Graphs !!

Jit — Fri, 04 Nov 2016 10:48:00 -0500

The blog is a collection of script examples with example data and output plots. R produce excellent quality graphs for data analysis, science and business presentation, publications and other purposes. Self-help codes and examples are provided. Enjoy nice graphs !!

Address of the bookmark: http://rgraphgallery.blogspot.be/

Coronavirus Resources !

Neel — Wed, 25 Mar 2020 17:11:33 -0500

2019nCoVR features comprehensive integration of genomic and proteomic sequences as well as their metadata information from the GISAID, NCBI, NMDC and CNCB/NGDC. It also incorporates a wide range of relevant information including scientific literatures, news, and popular articles for science dissemination, and provides visualization functionalities for genome variation analysis results based on all collected 2019-nCoV strains.

Annotation

https://bigd.big.ac.cn/ncov/variation/annotation

Genome wharehouse

https://bigd.big.ac.cn/gwh/browse/index

Released Genome

https://bigd.big.ac.cn/ncov/release_genome

Download data

ftp://download.big.ac.cn/Genome/Viruses/Coronaviridae/

Raw data

https://bigd.big.ac.cn/gsa/browse/run/?tag=Coronaviridae

Address of the bookmark: https://bigd.big.ac.cn/ncov/about

Genome assembly training tutorial at Galaxy !

Jit — Sun, 27 Dec 2020 05:25:45 -0600

In this tutorial we assemble and annotate the genome of E. coli strain C-1. This strain is routinely used in experimental evolution studies involving bacteriophages. For instance, now classic works by Holly Wichman and Jim Bull (Bull 1997, Bull 1998, Wichman 1999) have been performed using this strain and bacteriophage phiX174.

Address of the bookmark: https://training.galaxyproject.org/training-material/topics/assembly/tutorials/unicycler-assembly/tutorial.html

IVA: accurate de novo assembly of RNA virus genomes

Neel — Wed, 23 Jun 2021 07:51:59 -0500

IVA (Iterative Virus Assembler) designed specifically for read pairs sequenced at highly variable depth from RNA virus samples. We tested IVA on datasets from 140 sequenced samples from human immunodeficiency virus-1 or influenza-virus-infected people and demonstrated that IVA outperforms all other virus de novo assemblers.

Availability and implementation: The software runs under Linux, has the GPLv3 licence and is freely available from http://sanger-pathogens.github.io/iva

https://pubmed.ncbi.nlm.nih.gov/25725497/

Address of the bookmark: https://github.com/sanger-pathogens/iva