BOL: Related items

PAired-eND Assembler for DNA sequences

Neel — Wed, 06 Apr 2016 05:25:34 -0500

PANDASEQ is a program to align Illumina reads, optionally with PCR primers embedded in the sequence, and reconstruct an overlapping sequence.

More at https://github.com/neufeld/pandaseq

Address of the bookmark: https://github.com/neufeld/pandaseq

BUSCO: Assessing genome assembly and annotation completeness with Benchmarking Universal Single-Copy Orthologs

Anjana — Tue, 10 May 2016 07:46:24 -0500

High-throughput genomics has revolutionized biological research, however, while the number of sequenced genomes grows by the day, quality assessment of the resulting assembled sequences remains complicated and mostly limited to technical measures like N50.
BUSCO provides measures for quantitative assessment of genome assembly, gene set, and transcriptome completeness based on evolutionarily informed expectations of gene content from near-universal single-copy orthologs selected from OrthoDB.
BUSCO assessments are implemented in open-source software, with comprehensive lineage-specific sets of Benchmarking Universal Single-Copy Orthologs for arthropods, vertebrates, metazoans, fungi, eukaryotes, and bacteria.
These conserved orthologs are ideal candidates for large-scale phylogenomics studies, and the annotated BUSCO gene models built during genome assessments provide a comprehensive gene predictor training set for use as part of genome annotation pipelines.
BUSCO assessments offer intuitive metrics, based on evolutionarily informed expectations of gene content from hundreds of species, to gauge completeness of rapidly accumulating genomic data and satisfy an Iberian's quest for quality - "Busco calidad/qualidade".

Address of the bookmark: http://busco.ezlab.org/

RECORD

Bulbul — Fri, 25 Nov 2016 08:23:36 -0600

Background. Next-generation sequencing technologies are now producing multiple times the genome size in total reads from a single experiment. This is enough information to reconstruct at least some of the differences between the individual genome studied in the experiment and the reference genome of the species. However, in most typical protocols, this information is disregarded and the reference genome is used. Results. We provide a new approach that allows researchers to reconstruct genomes very closely related to the reference genome (e.g., mutants of the same species) directly from the reads used in the experiment. Our approach applies de novo assembly software to experimental reads and so-called pseudoreads and uses the resulting contigs to generate a modified reference sequence. In this way, it can very quickly, and at no additional sequencing cost, generate new, modified reference sequence that is closer to the actual sequenced genome and has a full coverage. In this paper, we describe our approach and test its implementation called RECORD. We evaluate RECORD on both simulated and real data. We made our software publicly available on sourceforge. Conclusion. Our tests show that on closely related sequences RECORD outperforms more general assisted-assembly software.

More at https://sourceforge.net/projects/record-genome-assembler/files/

Address of the bookmark: https://www.ncbi.nlm.nih.gov/pubmed/26558255

SGA: String Graph Assembler

Jit — Thu, 08 Dec 2016 05:08:59 -0600

SGA is a de novo genome assembler based on the concept of string graphs. The major goal of SGA is to be very memory efficient, which is achieved by using a compressed representation of DNA sequence reads.

More at

https://github.com/jts/sga

SGA dependencies:
-google sparse hash library (http://code.google.com/p/google-sparsehash/)
-the bamtools library (https://github.com/pezmaster31/bamtools)
-zlib (http://www.zlib.net/)
-(optional but suggested) the jemalloc memory allocator (http://www.canonware.com/jemalloc/download.html)

Address of the bookmark: https://github.com/jts/sga

Understanding Greedy Algorithms

Jit — Mon, 12 Dec 2016 04:37:40 -0600

Learning greedy algo for biologist.

https://www.topcoder.com/community/data-science/data-science-tutorials/greedy-is-good/

This webpage is also useful for the same:

http://learninglover.com/examples.php?id=59

http://www.cs.rpi.edu/~magdon/ps/conference/super_biokdd.pdf

https://ocw.mit.edu/courses/biology/7-91j-foundations-of-computational-and-systems-biology-spring-2014/lecture-slides/MIT7_91JS14_Lecture6.pdf

http://schatzlab.cshl.edu/teaching/AssemblyClass/01.%20Assembly%20Intro.pdf

http://lsl.sinica.edu.tw/Services/Class/files/20150612449.pdf

http://www.cs.jhu.edu/~langmea/resources/lecture_notes/assembly_scs.pdf

https://www2.eecs.berkeley.edu/Pubs/TechRpts/2016/EECS-2016-43.pdf

Address of the bookmark: https://www.topcoder.com/community/data-science/data-science-tutorials/greedy-is-good/

PANDASEQ

Shruti Paniwala — Mon, 23 Jan 2017 04:54:32 -0600

PANDASEQ assembles paired-end Illumina reads into sequences, trying to correct for errors and uncalled bases. The assembler reads two files in FASTQ format with quality information. If amplification primers were used (e.g., to isolate a variable region of the 16S gene, or the constant regions around zinc finger binding residues), they can be removed from the sequence during assembly. The final sequence will correct any uncalled bases in the overlapping region using the complementary strand. When mismatches occur in the overlapping region, the base with the better quality score is chosen.
The algorithm is as follows:

1.Find the positions where the forward and reverse primers match best above the threshold and discard the ends of the sequence, including the primer.
2.Pick and overlap to maximise the probability of the forward and reverse reads having come from a single piece of DNA.
3.Identify the masking of the end of the read with the quality score B or # as done by CASAVA and adjust the probabilities in this region.
4.Construct an assembled sequence between the primers and calculate the quality.
5.Check for various constraints, including quality, length, uncalled bases, and user-supplied modules.

http://neufeldserver.uwaterloo.ca/~apmasell/pandaseq_man1.html

Address of the bookmark: http://neufeldserver.uwaterloo.ca/~apmasell/pandaseq_man1.html

CABOG: Celera Assembler with Best Overlap Graph

Abhimanyu Singh — Mon, 15 May 2017 05:04:39 -0500

CABOG (Celera Assembler with Best Overlap Graph) is scientific software for DNA research. CABOG has been a critical component of many genome sequencing projects. CABOG operates on small genomes such as bacterial as well as large genomes such as mammalian. CABOG is an extension of the Celera Assembler software that was originally developed at Celera for the 2001 publication of the first draft human genome sequence. The software was released to the public domain in 2004. Its open source repository on Source Forge is an internet resource for scientists around the world.

CABOG is one of many software programs called genome assemblers. These programs exist to overcome the fundamental limitation of all sequencing machines, namely, that they read out very few DNA letters at a time. These programs reconstruct genomes that are billions of letters long from the hundreds of letters per read that modern sequencers provide. What these programs do is often described as a scaled up version of a family solving a jigsaw puzzle.

The CABOG software was the first to accomplish many scientific goals. It was the first to assemble the genome of a multicellular organism (Drosophila melanogaster, 2000). It was the first to assemble both parental haplotypes of one human genome (J. Craig Venter, 2007). It was the first to assemble environmental sequence from the oceans (Sargasso Sea in 2004 and Global Ocean Sampling in 2007). It was first to combine reads from first-generation Sanger sequencing machines and second-generation pyrosequencing machines (Marine microbes, 2006). Today, CABOG is one of the leading assembly programs for data sets that include paired end data from the Roche 454 line of sequencing machines.

Address of the bookmark: http://www.jcvi.org/cms/research/projects/cabog/overview/

HOMER: Software for motif discovery and next-gen sequencing analysis

Neel — Tue, 26 Apr 2016 03:48:23 -0500

This tutorial covers topics independently of HOMER, and represents knowledge which is important to know before diving head first into more advanced analysis tools such as HOMER.

Setting up your computing environment
Retrieving and storing sequencing files (your own data or from public sources)
Checking sequence quality, trimming, general sequence manipulation
Mapping reads to a reference genome
Manipulating SAM/BAM alignment files
Visualizing data in a genome browser

RNA-Seq

Microarray

Basic analysis of Affymetrix Gene Expression Arrays using R/Bioconductor

General Tips for Data Analysis

Excel workarounds, adding gene annotation, X-Y plots tips, etc.

Address of the bookmark: http://homer.salk.edu/homer/basicTutorial/

Bioinformatics tools and software

Jit — Tue, 05 Jul 2016 10:02:26 -0500

USEARCH >
Extreme high-throughput sequence analysis. Orders of magnitude faster than BLAST. MUSCLE >
Multiple sequence alignment. Faster and more accurate than CLUSTALW.

UPARSE >
OTU clustering for 16S and other marker genes. Highly accurate OTU sequences and improved diversity measures. UCHIME >
Chimeric sequence detection. PILER >
De novo genome repeat finder. PILER-CR >
Detection of CRISPR repeats in bacterial genomes. QSCORE >
Compare two multiple alignments for benchmarking. PALS >
Whole-genome alignment. PREFAB >
Protein Reference Alignment Database. MSA benchmark collection >
Selected multiple alignment benchmarks in a standardized FASTA format.

Address of the bookmark: http://drive5.com/software.html

RATT

Jitendra Narayan — Sun, 07 Feb 2016 16:09:40 -0600

RATT is software to transfer annotation from a reference (annotated) genome to an unannotated query genome.

It was first developed to transfer annotations between different genome assembly versions. However, it can also transfer annotations between strains and even different species, like Plasmodium chabaudi onto P. berghei, between different Leishmania species or Salmonella enterica onto other Salmonella serotypes. RATT is able to transfer any entries present on a reference sequence, such as the systematic id or an annotator's notes; such information would be lost in a de novo annotation.

More at http://ratt.sourceforge.net/

Address of the bookmark: http://ratt.sourceforge.net/