BOL: Related items

Bioinformatics tools for genome assembly !

BioStar — Mon, 24 Jul 2023 07:04:26 -0500

There are numerous genome assembly tools available, each with its strengths and weaknesses. Here is a list of some widely used genome assembly tools as of my last update in September 2021:

SPAdes: An assembler specifically designed for single-cell and multi-cell bacterial genomes, as well as small eukaryotic genomes.
ABySS: A parallelized assembler for large genomes that uses de Bruijn graphs.
Velvet: Another de Bruijn graph-based assembler optimized for short-read sequencing data.
SOAPdenovo: A de Bruijn graph-based assembler designed for short reads, widely used for assembling large and complex genomes.
MaSuRCA: A hybrid assembler that combines data from multiple sequencing technologies, such as Illumina and PacBio.
Canu: A long-read assembler optimized for PacBio and Oxford Nanopore sequencing data.
Flye: A long-read assembler suitable for bacterial and small eukaryotic genomes.
SMARTdenovo: An assembler designed for long reads, particularly suited for PacBio data.
SPAdes Long Read (SPAdesLR): An extension of SPAdes for long-read data, such as those from PacBio or Nanopore.
Minia: An assembler optimized for low memory consumption, suitable for small and medium-sized genomes.
Unicycler: A hybrid assembler that combines short and long reads for circular bacterial genome assembly.
wtdbg2: A de Bruijn graph assembler for long reads, efficient for very large genomes.
Shasta: A long-read assembler that uses the Overlap-Layout-Consensus approach, suitable for PacBio and Nanopore data.
Sparc: An assembler designed to handle noisy long reads from Nanopore sequencing.
CANA: An assembler for metagenomic data, particularly for complex and diverse microbial communities.
Ra Assembler: A metagenome assembler for long reads, designed for highly complex metagenomic samples.

Please note that the field of bioinformatics is constantly evolving, and new assembly tools may have emerged since my last update. Additionally, the performance of these tools can vary depending on the characteristics of the sequencing data and the genome being assembled. When selecting an assembly tool, consider the specific requirements of your project, the available data types, and the computational resources at your disposal. Always refer to the respective tool's documentation and publications for the most up-to-date information and recommendations.

MAKER

Jitendra Narayan — Sun, 07 Feb 2016 15:59:24 -0600

MAKER is a portable and easily configurable genome annotation pipeline.Its purpose is to allow smaller eukaryotic and prokaryotic genome projects to independently annotate their genomes and to create genome databases. MAKER identifies repeats, aligns ESTs and proteins to a genome, produces ab-initio gene predictions and automatically synthesizes these data into gene annotations having evidence-based quality values.

More at http://www.yandell-lab.org/software/maker.html

Address of the bookmark: http://www.yandell-lab.org/software/maker.html

CrossMap

Jitendra Narayan — Mon, 08 Feb 2016 15:47:00 -0600

CrossMap is a program for convenient conversion of genome coordinates (or annotation files) between different assemblies (such as Human hg18 (NCBI36) <> hg19 (GRCh37), Mouse mm9 (MGSCv37) <> mm10 (GRCm38)).

It supports most commonly used file formats including SAM/BAM, Wiggle/BigWig, BED, GFF/GTF, VCF.

CrossMap is designed to liftover genome coordinates between assemblies. It’s not a program for aligning sequences to reference genome.

We do not recommend using CrossMap to convert genome coordinates between species.

More at http://crossmap.sourceforge.net/

Address of the bookmark: http://crossmap.sourceforge.net/

Easyfig

Poonam Mahapatra — Fri, 29 Apr 2016 05:49:39 -0500

Easyfig has moved to github, for newer releases of Easyfig please visit our new webpage - https://mjsull.github.io/Easyfig. Easyfig is a Python application for creating linear comparison figures of multiple genomic loci with an easy-to-use graphical user interface (GUI).

More at http://easyfig.sourceforge.net/

Address of the bookmark: http://easyfig.sourceforge.net/

Finding Patterns in Biological Sequences

Jit — Thu, 22 Dec 2016 10:30:49 -0600

In this report we provide an overview of known techniques for discovery of patterns of biological sequences (DNA and proteins). We also provide biological motivation, and methods of biological verification of such patterns. Finally we list publicly available tools and databases for pattern discovery. On-line supplement is available through http://genetics.uwaterloo.ca/∼tvinar/cs798g/motif.

Address of the bookmark: http://engr.case.edu/li_jing/papers/00798gpattern.pdf

SPAdes

Abhimanyu Singh — Tue, 19 Apr 2016 08:37:08 -0500

SPAdes – St. Petersburg genome assembler – is intended for both standard isolates and single-cell MDA bacteria assemblies. This manual will help you to install and run SPAdes. SPAdes version 3.7.1 was released under GPLv2 on March 8, 2016 and can be downloaded from http://bioinf.spbau.ru/en/spades.

Manual at http://spades.bioinf.spbau.ru/release3.7.1/manual.html

Address of the bookmark: http://bioinf.spbau.ru/spades

Platanus

Jit — Fri, 13 May 2016 05:12:40 -0500

Platanus is a novel de novo sequence assembler that can reconstruct genomic sequences of
highly heterozygous diploids from massively parallel shotgun sequencing data.

The latest version is 1.2.4.

To cite Platanus, please use the following:

Kajitani R, Toshimoto K, Noguchi H, Toyoda A, Ogura Y, Okuno M, Yabana M, Harada M, Nagayasu E, Maruyama H, Kohara Y, Fujiyama A, Hayashi T, Itoh T, “Efficient de novo assembly of highly heterozygous genomes from whole-genome shotgun short reads”. Genome Res. 2014 Aug;24(8):1384-95. doi: 10.1101/gr.170720.113. [abstract | full text]

Address of the bookmark: http://platanus.bio.titech.ac.jp/

Minia

Jit — Thu, 08 Dec 2016 05:07:00 -0600

Minia is a short-read assembler based on a de Bruijn graph, capable of assembling a human genome on a desktop computer in a day. The output of Minia is a set of contigs. Minia produces results of similar contiguity and accuracy to other de Bruijn assemblers (e.g. Velvet).

Download

Minia 2.0.7 Linux 64-bits binaries (Source code) (Legacy codebase)

For the impatient

A typical Minia command line looks like:

./minia -in reads.fa -kmer-size 31 -abundance-min 3 -out output_prefix

Type

./minia

for a quick explanation of the parameters.

For more information, refer to the manual.

KmerGenie can be used to determine the best k-mer size, minimum abundance of correct k-mers, and genome size estimation for your dataset.

Address of the bookmark: http://minia.genouest.org/

GAM-NGS: genomic assemblies merger for next generation sequencing

Jit — Mon, 19 Dec 2016 06:07:05 -0600

GAM-NGS (Genomic Assemblies Merger for Next Generation Sequencing), whose primary goal is to merge two or more assemblies in order to enhance contiguity and correctness of both. GAM-NGS does not rely on global alignment: regions of the two assemblies representing the same genomic locus (called blocks) are identified through reads' alignments and stored in a weightedgraph. The merging phase is carried out with the help of this weighted graph that allows an optimal resolution of local problematic regions.

Address of the bookmark: https://github.com/vice87/gam-ngs

BRIG

Jit — Thu, 16 Feb 2017 13:14:25 -0600

BRIG is a free cross-platform (Windows/Mac/Unix) application that can display circular comparisons between a large number of genomes, with a focus on handling genome assembly data. The application is available at:http://sourceforge.net/projects/brig

If you have any questions or comments, post them on one of the trackers on BRIG’s SourceForge page:http://sourceforge.net/tracker/?group_id=328245.

Features:

Images show similarity between a central reference sequence and other sequences as concentric rings.
BRIG will perform all BLAST comparisons and file parsing automatically via a simple GUI.
Contig boundaries and read coverage can be displayed for draft genomes; customized graphs and annotations can be displayed.
Using a user-defined set of genes as input, BRIG can display gene presence, absence, truncation or sequence variation in a set of complete genomes, draft genomes or even raw, unassembled sequence data.
BRIG also accepts SAM-formatted read-mapping files enabling genomic regions present in unassembled sequence data from multiple samples to be compared simultaneously

Address of the bookmark: http://brig.sourceforge.net/