BOL: Related items

Bioinformatics JRF vacancy at ICGEB, New Delhi

Wed, 23 Jul 2014 16:07:15 -0500

Junior Research Fellow for a DBT sponsored project entitled "Computational and experimental characterization of stage specific arginine methylation in P. falciparum proteome".

Candidates should have a 1st class MSc/MTech/BTech degree in Bioinformatics. Please send complete CV, quoting Application for RMETH-JRF-2014, by email to Dr. Dinesh Gupta: dinesh@icgeb.res.in

Closing date for applications: 6 August 2014

More at http://www.icgeb.org/tl_files/Vacancies/JRF.pdf

Ancient whole genome duplication (WGD) detection tools !

Rahul Nayak — Sun, 07 Mar 2021 00:32:44 -0600

There are two methods for ancient WGD detection, one is collinearity analysis, and the other is based on the Ks distribution map. Among them, Ks is defined as the average number of synonymous substitutions at each synonymous site, and there is also a Ka corresponding to it, which refers to the average number of non-synonymous substitutions at each non-synonymous site.

At present, some people have posted articles about the analysis process of WGD. I searched for the keyword "wgd pipeline" and found the following:

GenoDup: https:// github.com/MaoYafei/GenoDup-Pipeline
https://peerj.com/articles/6303/
WGDdetector: https:// github.com/yongzhiyang2 012/WGDdetector
https://bmcbioinformatics.biomedcentral.com/articles/10.1186/s12859-019-2670-3
wgd: https:// github.com/arzwa/wgd
https://bmcbioinformatics.biomedcentral.com/articles/10.1186/s12859-016-1142-2#Sec1
https://bmcbiol.biomedcentral.com/articles/10.1186/s12915-017-0399-x
GeNoGAP https://bmcbioinformatics.biomedcentral.com/articles/10.1186/s12859-016-1142-2
https://bmcbiol.biomedcentral.com/articles/10.1186/s12915-017-0399-x
https://github.com/dfguan/purge_dups
https://www.biorxiv.org/content/10.1101/2020.01.24.917997v1

This article introduces the usage of wgd.

Wgd cannot be installed directly with bioconda at present, so it is a little troublesome to install, because it depends on a lot of software. wgd depends on the following software

BLAST
MCL
MUSCLE/MAFFT/PRANK
PAML
PhyML/FastTree
i-ADHoRe

But the good news is that most of the software it depends on can be installed with bioconda

conda create -n wgd python=3.5 blast mcl muscle mafft prank paml fasttree cmake libpng mpi=1.0=mpich
conda activate wgd

Here mpi=1.0=mpich is selected, because i-adhore depends on mpich. If openmpi is installed, an error will appear while loading shared libraries: libmpi_cxx.so.40: cannot open shared object file: No such file or directory

After that, the installation is much simpler

git clone https://github.com/arzwa/wgd.git
cd wgd
pip install .
pip install git+https://github.com/arzwa/wgd.git
For i-ADHoRe, you need to register at http:// bioinformatics.psb.ugent.be /webtools/i-adhore/licensing/Agree to the license to download i-ADHoRe-3.0

Since my miniconda3 installed ~/opt/, the installation path is so~/opt/miniconda3/envs/wgd/

tar -zxvf i-adhore-3.0.01.tar.gz
cd i-adhore-3.0.01
mkdir -p build && cd build
cmake .. -DCMAKE_INSTALL_PREFIX=~/opt/miniconda3/envs/wgd/
make -j 4
make insatall

Take the sugarcane genome Saccharum spontaneum L as an example. The genome is 8-ploid with 32 chromosomes (2n = 4x8 = 32)

Download the tutorial for CDS and GFF annotation files

mkdir -p wgd_tutorial && cd wgd_tutorial
wget http://www.life.illinois.edu/ming/downloads/Spontaneum_genome/Sspon.v20190103.cds.fasta.gz
wget http://www.life.illinois.edu/ming/downloads/Spontaneum_genome/Sspon.v20190103.gff3.gz
gunzip *.gz

First conda activate wgdstart our analysis environment, and then start the analysis

Step 1 : Use to wgd mclidentify homologous genes in the genome

wgd mcl -n 20 --cds --mcl -s Sspon.v20190103.cds.fasta -o Sspon_cds.out

Step 2 : Use to wgd ksdbuild Ks distribution

wgd ksd --n_threads 80 Sspon_cds.out/Sspon.v20190103.cds.fasta.blast.tsv.mcl Sspon.v20190103.cds.fasta

Step 3 : If the quality of the genome is good, then wgd syncollinearity analysis can be used . It can help us find the collinearity block in the genome and the corresponding anchor point

wgd syn --feature gene --gene_attribute ID \
-ks wgd_ksd/Sspon.v20190103.cds.fasta.ks.tsv \
Sspon.v20190103.gff3 Sspon_cds.out/Sspon.v20190103.cds.fasta.blast.tsv.mcl

For more reading - There are 9 sub-modules in WGD

kde: KDE fitting to the Ks distribution
ksd: Ks distribution construction
mcl: BLASP comparison of All-vs-ALl + MCL classification analysis.
mix: Hybrid modeling of Ks distribution.
pre: preprocess the CDS file
syn: Call I-ADHoRe 3.0 to use GFF files for collinearity analysis
viz: draw histogram and density plot
wf1: Ks standard analysis procedure of the whole genome paranome (paranome), call mcl, ksd and syn
wf2: Ks standard analysis procedure of one-vs-one homologous gene (ortholog), call wcl and kSD

Linux Sort Commands for Bioinformatics

Rahul Nayak — Sat, 31 May 2014 15:41:16 -0500

Almost all the scripting languages such as Perl, Python etc have built-in sort, but unfortunately none of them are as flexible as sort command. But one when it come to space efficiency GNU sort stands at the top. It can sort a 20Gb file with less than 2Gb memory. It is not trivial to implement so powerful a sort by yourself.

sort a space-delimited file based on its first column, then the second if the first is the same, and so on:
sort input.txt

sort a huge file (GNU sort ONLY):
sort -S 1500M -t $HOME/tmp input.txt > sorted.txt

sort starting from the third column, skipping the first two columns:
sort +2 input.txt

sort the second column as numbers, descending order; if identical, sort the 3rd as strings, ascending order:
sort -k2,2nr -k3,3 input.txt

sort starting from the 4th character at column 2, as numbers:
sort -k2.4n input.txt

More Linxu sort command information

If you have any sort commands you'd like to share, please add them to our comments section below. For more help, you can also type:

man sort

or

sort --help

on your Unix/Linux system.

GEnView: A phylogeny based comparative genomics software to analyze the genetic environment of genes

Abhi — Tue, 28 Dec 2021 01:49:03 -0600

A phylogeny based comparative genomics software to analyze the genetic environment of genes. The user can select one or several taxa and provide one or several reference protein(s). Genomes and plasmids (based on user choice) will be downloaded from the NCBI Assembly/NR database and searched for the respective gene. Alternatively, custom genomes can be provided. User selected stretches (20kbp by default) of the genes genetic environment are extracted, annotated and aligned between all genomes. The sequences are then visualized, enabling comparison of synteny and gene content.

More at https://pubmed.ncbi.nlm.nih.gov/34951622/

Address of the bookmark: https://github.com/EbmeyerSt/GEnView

dna2bit: an ultra-fast and accurate genomic distance estimation software

LEGE — Sun, 31 Aug 2025 06:24:58 -0500

dna2bit is a software tool developed in C++11, leveraging the capabilities of OpenMP for parallel computing and the popcount technique for efficient bit manipulation. It has been thoroughly tested using the g++ and clang compilers on both Linux and MacOS platforms.

Address of the bookmark: https://github.com/lijuzeng/dna2bit

Search Shell Command History

Rahul Nayak — Thu, 12 Jun 2014 17:43:34 -0500

We use couple of hundreads of command in daily basis. Most of them are actually repeated several time. The question remain open how do I search old command history under bash shell and modify or reuse it?

Now a days almost all modern shell allows you to search command history if enabled by user. Use history command to display the history list with line numbers. Lines listed with with a * have been modified by user.

Shell history search command

Type history at a shell prompt:
$ history

It will display the list of all used commandline history with an serial number.

To search particular command, enter:
$ history | grep command-name
$ history | egrep -i 'scp|ssh|ftp'
Emacs Line-Edit Mode Command History Searching

To get previous command containing string, hit [CTRL]+[r] followed by search string:

(reverse-i-search):

To get previous command, hit [CTRL]+[p]. You can also use up arrow key.

CTRL-p

To get next command, hit [CTRL]+[n]. You can also use down arrow key.

CTRL-n

fc command

Apart from hostory command there are fc command to extract the command from history. The fc stands for either "find command" or "fix command.

For example list last 10 command, enter:
$ fc -l 10
To list commands 130 through 150, enter:
$ fc -l 130 150
To list all commands since the last command beginning with ssh, enter:
$ fc -l ssh
You can edit commands 1 through 5 using vi text editor, enter:
$ fc -e vi 1 5

Delete command history

The -c option causes the history list to be cleared by deleting all of the entries:
$ history -c

BBSplit: Read Binning Tool for Metagenomes and Contaminated Libraries

Poonam Mahapatra — Wed, 03 Jan 2018 00:25:27 -0600

BBSplit internally uses BBMap to map reads to multiple genomes at once, and determine which genome they match best. This is different than with ordinary mapping. If a genome (say, human) contains an exact repeat somewhere, reads mapping to it will be mapped ambiguously. But if you want to determine whether reads are mouse or human, it does not matter whether they map ambiguously within human, only whether they are ambiguous between human and mouse. BBSplit tracks this additional ambiguity information and decides how to use it based on the “ambig2” flag. The normal use of BBSplit is like Seal, either quantifying how many reads go to each reference, or splitting the reads into multiple output files, one per reference. BBSplit can only be run using references indexed with BBSplit, as they contain additional information regarding which sequences came from which reference file.

BBSplit is a tool that bins reads by mapping to multiple references simultaneously, using BBMap. The reads go to the bin of the reference they map to best. There are also disambiguation options, such that reads that map to multiple references can be binned with all of them, none of them, one of them, or put in a special "ambiguous" file for each of them. Paired reads will always be kept together.

For example, if you had a library of something that was contaminated with e.coli and salmonella, you could do this:

bbsplit.sh in=reads.fq ref=ecoli.fa,salmonella.fa basename=out_%.fq outu=clean.fq int=t

This will produce 3 output files:
out_ecoli.fq (ecoli reads)
out_salmonella.fq (salmonella reads)
clean.fq (unmapped reads)

In this case, "int=t" means that the input file is paired and interleaved. For single-end reads you would leave that out. For paired reads in 2 files, you would do this:
bbsplit.sh in1=reads1.fq in2=reads2.fq ref=ecoli.fa,salmonella.fa basename=out_%.fq outu1=clean1.fq outu2=clean2.fq

BBSplit is available here:
https://sourceforge.net/projects/bbmap/

The sensitivity can be raised to be equivalent to BBMap with these flags: "minratio=0.56 minhits=1 maxindel=16000"

Bioinformatician’s Pocket Reference !!

RAJESH DETROJA — Sun, 08 Jun 2014 09:56:58 -0500

It is amusing how brain of bioinformaticians work! Learning a new programming language for days feels so much of fun that making 5 minute discussion with neighbours (unless under special circumstances!) in our own mother-tongue. Today every bioinformatician keeps more than few languages and core IT toolkits on their plate. It has become mandatory to be able to mould different code snippets to build our own custom workflows, and thus keeping syntax at our fingertips has become essential.Although Google is best way to get syntax problem solved, it is not a bad idea to keep reference sheets is our smartphones or stick out some printed sheets on the back of your door, in the old fashion way!!

Address of the bookmark: http://infoplatter.wordpress.com/2014/04/06/bioinformaticians-pocket-reference/

lordFAST: sensitive and Fast Alignment Search Tool for LOng noisy Read sequencing Data

BioJoker — Tue, 27 Nov 2018 04:43:57 -0600

lordFAST is a sensitive tool for mapping long reads with high error rates. lordFAST is specially designed for aligning reads from PacBio sequencing technology but provides the user the ability to change alignment parameters depending on the reads and application.

lordFAST, a novel long-read mapper that is specifically designed to align reads generated by PacBio and potentially other SMS technologies to a reference. lordFAST not only has higher sensitivity than the available alternatives, it is also among the fastest and has a very low memory footprint.

Address of the bookmark: https://github.com/vpc-ccg/lordfast

Assistant Professor in Medical Bioinformatics

Tue, 24 Jun 2014 01:46:36 -0500

Advt. No : ME-I/A-IV/03/14
No.of Posts:01 (SC)
Pay Scale:
Pay Band of Rs.15600-39100 + Rs.6000/- GP +NPA @ 25% of Basic Pay +Learning Resource Allowance @ Rs.20,000/-P.A.+ Conveyance Allowance @ Rs. 1650/-P.M.+ Academic Allowance @ Rs.2500/- P.M. and other admissible allowances.
Qualifications:
Area of Specialization:-
Bioinformatics/Computational/Biology/Genomics/ Proteomics/ Structural Biology
1. Postgraduate qualification, e.g. Master’s Degree in Biotechnology/Bioinformatics/ Biophysics.
2. A Doctorate Degree of recognized University/Institute in a basic or allied Medical Science subject e.g. Medical Biotechnology/Biophysics. Bioinformatics/X-ray Crystallography/
Immunology/Structural Biology etc
Experience:
1.Minimum three years teaching and/or research experience in a recognized medical/research Institution in an allied medical subject after obtaining doctorate degree and preferably in Medical
Molecular Biology/ Biophysics/Structural Biology/Genomics and Clinical Proteomics/Computational Biology.
2. Minimum two publication with atleast one in international journal and atleast one as first author
Desirable:-
Consistently excellent scholastic/academic record, demonstrated ability to write grant proposal/(s) successfully, Post Doctoral training in a frontier area of medical Bioinformatics Research and of direct relevance to clinical diagnosis or patient care (preferably from a recognized top-ranking medical institution abroad)
Send your applications to O/O, Deputy Registrar, Recruitment & Establishment Cell, University of Health Sciences, Rohtak by 08.7.2014
For more details,please visit website: http://pgimsrohtak.nic.in/2014%20AP%20Advt.pdf
Last Apply Date: 08 Jul 2014