BOL: Related items

Mapping NGS

Abhimanyu Singh — Tue, 02 May 2017 07:58:07 -0500

NGS data are just a bunch of sequences, you have no idea which region in the genome each sequences comes from, which gene it represents...
To know that you have to align the sequences to the reference sequence. The reference sequence is in most cases the full genome sequence but sometimes, a library of EST sequences is used.
In either way, aligning your sequence reads to the reference sequence is called mapping.

The most used mappers of DNA-seq data are BWA and Bowtie for DNA-Seq data and Tophat, STAR or HISAT for RNA-Seq data. Mappers differ in which options they can take in, how fast and how accurate they are. Bowtie is faster than BWA, but looses some sensitivity (does not map an equal amount of reads to the correct position in the genome).

Address of the bookmark: http://wiki.bits.vib.be/index.php/Mapping_of_NGS_data

CONCOCT: Clustering cONtigs with COverage and ComposiTion

Jit — Mon, 06 Mar 2017 04:08:16 -0600

A program for unsupervised binning of metagenomic contigs by using nucleotide composition, coverage data in multiple samples and linkage data from paired end reads.

Warning! This software is to be considered under development. Functionality and the user interface may still change significantly from one version to another. If you want to use this software, please stay up to date with the list of known issues:https://github.com/BinPro/CONCOCT/issues

Address of the bookmark: https://github.com/BinPro/CONCOCT

RATT

Jitendra Narayan — Sun, 07 Feb 2016 16:09:40 -0600

RATT is software to transfer annotation from a reference (annotated) genome to an unannotated query genome.

It was first developed to transfer annotations between different genome assembly versions. However, it can also transfer annotations between strains and even different species, like Plasmodium chabaudi onto P. berghei, between different Leishmania species or Salmonella enterica onto other Salmonella serotypes. RATT is able to transfer any entries present on a reference sequence, such as the systematic id or an annotator's notes; such information would be lost in a de novo annotation.

More at http://ratt.sourceforge.net/

Address of the bookmark: http://ratt.sourceforge.net/

AccNET

Jitendra Narayan — Fri, 07 Oct 2016 05:22:11 -0500

AccNET is a Perl application that presents a new way to study the accessory genome of a given set of organisms. Using the proteomes of these organisms, AccNET create a bipartite network compatible with common network analysis platforms. AccNET collects phylogenetic and functional information in a network improving the analysis capability. Networks offer a new perspective of organism organization through elements acquired by horizontal gene transfers and not constricted by hierarchical structures.

More at https://www.youtube.com/watch?v=vdGuy1GAJrQ

Address of the bookmark: https://sourceforge.net/projects/accnet/

RCircos: an R package for Circos 2D track plots

Jit — Fri, 20 May 2016 11:01:13 -0500

RCircos package provides a simple and flexible way to make Circos 2D track plots with R and could be easily integrated into other R data processing and graphic manipulation pipelines for presenting large-scale multi-sample genomic research data. It can also serve as a base tool to generate complex Circos images.

More at https://bitbucket.org/henryhzhang/rcircos/src

Address of the bookmark: https://bitbucket.org/henryhzhang/rcircos/src

KisSplice

Jit — Tue, 16 Aug 2016 08:34:19 -0500

KisSplice is a software that enables to analyse RNA-seq data with or without a reference genome. It is an exact local transcriptome assembler that allows to identify SNPs, indels and alternative splicing events. It can deal with an arbitrary number of biological conditions, and will quantify each variant in each condition. It has been tested on Illumina datasets of up to 1G reads. Its memory consumption is around 5Gb for 100M reads.

KisSplice is not a full-length transcriptome assembler. This means that it will output the variable regions of the transcripts, not reconstruct them entirely.

KisSplice comes as a workflow, with several possible post-treatments meant to facilitate the analysis of the results. The choice of the post-treatment depends on the availability of a reference genome/transcriptome and on the need to perform a differential analysis, as summarised in the following table.

Address of the bookmark: http://kissplice.prabi.fr/

A5-miseq

Jit — Thu, 18 Aug 2016 04:05:23 -0500

_A5-miseq_ is a pipeline for assembling DNA sequence data generated on the Illumina sequencing platform. This README will take you through the steps necessary for running _A5-miseq_.

Point to note:

There are many situations where A5-miseq is not the right tool for the job. In order to produce accurate results, A5-miseq requires Illumina data with certain characteristics. A5-miseq will likely not work well with Illumina reads shorter than around 80nt, or reads where the base qualities are low in all or most reads before 60nt. A5-miseq assumes it is assembling homozygous haploid genomes. Use a different assembler for metagenomes and heterozygous diploid or polyploid organisms. Use a different assembler if a tool like FastQC reports your data quality is dubious. You have been warned! Datasets consisting solely of unpaired reads are not currently supported.

Address of the bookmark: https://sourceforge.net/projects/ngopt/

DECIPHER

Anjana — Fri, 30 Sep 2016 09:33:12 -0500

DECIPHER is a software toolset that can be used to maintain, analyze, and decipher large amounts of DNA sequence data. To install DECIPHER, see the Downloads page.

To begin using DECIPHER read the "Getting Started DECIPHERing" tutorial. Refer to the PDF documents below for instructions on how to use DECIPHER for various tasks.

Address of the bookmark: http://decipher.cee.wisc.edu/Documentation.html

Beagle

Jit — Thu, 27 Oct 2016 11:19:00 -0500

Beagle is a software package that performs genotype calling, genotype phasing, imputation of ungenotyped markers, and identity-by-descent segment detection.

Beagle version 4.1 has a more accurate genotype phasing algorithm and a very fast and accurate genotype imputation algorithm. Version 4.1 also has several changes to the command line arguments which are described in the release notes. The "ped" argument has no effect in version 4.1. If your data contains nuclear families and you want to model the parent-offspring relationships when phasing genotypes, please use version 4.0.

If you use Beagle 4.1 in a published analysis, please report the program version and cite the appropriate article.

The citation for Beagle's phasing algorithm is:

S R Browning and B L Browning (2007) Rapid and accurate haplotype phasing and missing data inference for whole genome association studies by use of localized haplotype clustering. Am J Hum Genet 81:1084-1097.doi:10.1086/521987

The citation for Beagle's genotype imputation algorithm is:

B L Browning and S R Browning (2016). Genotype imputation with millions of reference samples. Am J Hum Genet 98:116-126.doi:10.1016/j.ajhg.2015.11.020

The citation for Beagle's IBD detection algorithm is:

B L Browning and S R Browning (2013). Improving the accuracy and efficiency of identity-by-descent detection in population data. Genetics 194(2):459-71.doi:10.1534/genetics.113.150029

Address of the bookmark: http://faculty.washington.edu/browning/beagle/beagle.html

ART: Set of Simulation Tools

Jit — Thu, 03 Nov 2016 08:28:25 -0500

ART is a set of simulation tools to generate synthetic next-generation sequencing reads. ART simulates sequencing reads by mimicking real sequencing process with empirical error models or quality profiles summarized from large recalibrated sequencing data. ART can also simulate reads using user own read error model or quality profiles. ART supports simulation of single-end, paired-end/mate-pair reads of three major commercial next-generation sequencing platforms: Illumina's Solexa, Roche's 454 and Applied Biosystems' SOLiD. ART can be used to test or benchmark a variety of method or tools for next-generation sequencing data analysis, including read alignment, de novo assembly, SNP and structure variation discovery. ART was used as a primary tool for the simulation study of the 1000 Genomes Project . ART is implemented in C++ with optimized algorithms and is highly efficient in read simulation. ART outputs reads in the FASTQ format, and alignments in the ALN format. ART can also generate alignments in the SAM alignment or UCSC BED file format. ART can be used together with genome variants simulators (e.g. VarSim) for evaluating variant calling tools or methods.

Address of the bookmark: http://www.niehs.nih.gov/research/resources/software/biostatistics/art/