BOL: Related items

Ka, Ks and Ka/Ks calculations

Poonam Mahapatra — Mon, 29 Aug 2016 11:44:11 -0500

gKaKs is a codon-based genome-level Ka/Ks computation pipeline developed and based on programs from four widely used packages: BLAT, BLASTALL (including bl2seq, formatdb and fastacmd), PAML (including codeml and yn00) and KaKs_Calculator (including 10 substitution rate estimation methods). gKaKs can automatically detect and eliminate frameshift mutations and premature stop codons to compute the substitution rates (Ka, Ks and Ka/Ks) between a well-annotated genome and a non-annotated genome or even a poorly assembled scaffold dataset. It is especially useful for newly sequenced genomes that have not been well annotated.

Look for KaKs calculation:

https://github.com/fumba/kaks-calculator

http://longlab.uchicago.edu/?q=gKaKs

http://www.ncbi.nlm.nih.gov/pubmed/23314322

Address of the bookmark: http://longlab.uchicago.edu/?q=gKaKs

BRAKER: pipeline for fully automated prediction of protein coding genes with GeneMark-ES/ET and AUGUSTUS in novel eukaryotic genomes

Jit — Thu, 01 Sep 2016 08:02:59 -0500

Gene finding in eukaryotic genomes is notoriously difficult to automate. The task is to design a work flow with a minimal set of tools that would reach state-of-the-art performance across a wide range of species. GeneMark-ET is a gene prediction tool that incorporates RNA-Seq data into unsupervised training and subsequently generates ab initio gene predictions. AUGUSTUS is a gene finder that usually requires supervised training and uses information from RNA-Seq reads in the prediction step. Complementary strengths of GeneMark-ET and AUGUSTUS provided motivation for designing a new combined tool for automatic gene prediction.

http://www.ncbi.nlm.nih.gov/pubmed/26559507

Address of the bookmark: http://bioinf.uni-greifswald.de/bioinf/braker/

NGS Tutorial

Jit — Mon, 05 Sep 2016 09:50:46 -0500

These tutorials are written for hundreds of bioinformaticians trying to cope with large volume of next-generation sequencing (NGS) data. NGS technologies brought a dramatic shift in the world of sequencing. Merely five years back, genome sequencing of higher eukaryotes used to be very expensive endeavor. To get a genome of interest sequenced, hundreds of scientists had to raise funds together by writing a joint white-paper and petitioning to various government agencies. The tasks of sequencing and assembly were handled by dedicated sequencing facilities, of which only a few existed around the globe. Naturally, the capacities at those sequencing facilities were significantly constrained from high volume of requests

Address of the bookmark: http://www.homolog.us/Tutorials/index.php

OPERA : Optimal Paired-End Read Assembler

Jit — Fri, 09 Sep 2016 05:28:58 -0500

OPERA (Optimal Paired-End Read Assembler) is a sequence assembly program (http://en.wikipedia.org/wiki/Sequence_assembly). It uses information from paired-end/mate-pair/long reads to order and orient the intermediate contigs/scaffolds assembled in a genome assembly project, in a process known as Scaffolding. OPERA is based on an exact algorithm that is guaranteed to minimize the discordance of scaffolds with the information provided by the paired-end/mate-pair/long reads (for further details see Gao et al, 2011).

Note that since the original publication, we have made significant changes to OPERA (v1.0 onwards) including refinements to its basic algorithm (to reduce local errors, improve efficiency etc.) and incorporated features that are important for scaffolding large genomes (multi-library support, better repeat-handling etc.), in addition to other scalability and usability improvements (bam and gzip support, smaller memory footprint). We therefore encourage you to download and use our latest version: OPERA-LG. In our benchmarks, it has significantly improved corrected N50 and reduced the number of scaffolding errors. Furthermore, our latest release contains the wrapper script OPERA-long-read that enables scaffolding with long-reads from third-generation sequencing technologies (PacBio or Oxford Nanopore). The manuscript describing the new features and algorithms is available at Genome Biology. We look forward to getting your feedback to improve it further.

Address of the bookmark: https://sourceforge.net/p/operasf/wiki/The%20OPERA%20wiki/

Genobuntu: A software package containing more than 70 software and packages oriented towards NGS and genome assembly

BioStar — Tue, 11 Dec 2018 05:15:57 -0600

Genobuntu is a software package containing more than 70 software and packages oriented towards NGS. In its current version, Genobuntu supports pre assembly tools, genome assemblers as well as post assembly tools.

Commonly used biological software and example script files for different assembly pipelines have also been provided, where the example script files can be updated to suit one’s experimental needs. Genobuntu attempts to reduce the amount of time and energy needed to build software workstations and it can also act as a good teaching source for a class room setting.

https://sourceforge.net/projects/genobuntu/

Address of the bookmark: https://sourceforge.net/projects/genobuntu/

GeneBreak: a tool to systematically identify genes recurrently affected by the genomic location of chromosomal CNA-associated breaks by a genome-wide approach

Jit — Sat, 01 Oct 2016 15:15:29 -0500

Development of cancer is driven by somatic alterations, including numerical and structural chromosomal aberrations. Currently, several computational methods are available and are widely applied to detect numerical copy number aberrations (CNAs) of chromosomal segments in tumor genomes. However, there is lack of computational methods that systematically detect structural chromosomal aberrations by virtue of the genomic location of CNA-associated chromosomal breaks and identify genes that appear non-randomly affected by chromosomal breakpoints across (large) series of tumor samples. ‘GeneBreak’ is developed to systematically identify genes recurrently affected by the genomic location of chromosomal CNA-associated breaks by a genome-wide approach, which can be applied to DNA copy number data obtained by array-Comparative Genomic Hybridization (CGH) or by (low-pass) whole genome sequencing (WGS). First, ‘GeneBreak’ collects the genomic locations of chromosomal CNA-associated breaks that were previously pinpointed by the segmentation algorithm that was applied to obtain CNA profiles. Next, a tailored annotation approach for breakpoint-to-gene mapping is implemented. Finally, dedicated cohort-based statistics is incorporated with correction for covariates that influence the probability to be a breakpoint gene. In addition, multiple testing correction is integrated to reveal recurrent breakpoint events. This easy-to-use algorithm, ‘GeneBreak’, is implemented in R (www.cran.r-project.org) and is available from Bioconductor (www.bioconductor.org/packages/release/bioc/html/GeneBreak.html).

Address of the bookmark: http://www.bioconductor.org/packages/release/bioc/html/GeneBreak.html

Flye: Fast and accurate de novo assembler for single molecule sequencing reads

BioJoker — Tue, 02 Apr 2019 21:54:55 -0500

Flye is a de novo assembler for single molecule sequencing reads, such as those produced by PacBio and Oxford Nanopore Technologies. It is designed for a wide range of datasets, from small bacterial projects to large mammalian-scale assemblies. The package represents a complete pipeline: it takes raw PB / ONT reads as input and outputs polished contigs. Flye also includes a special mode for metagenome assembly.

Address of the bookmark: https://github.com/fenderglass/Flye

PHYMMBL

Jit — Mon, 10 Oct 2016 08:56:34 -0500

Metagenomics sequencing projects collect samples of DNA from uncharacterized environments that may contain hundreds or even thousands of species. One of the main challenges in analyzing a metagenome is phylogenetic classification of raw sequence reads into groups representing the same or similar species. Such classification is a useful prerequisite for genome assembly and for analysis of the biological diversity present in a sample. The newest sequencing technologies have simultaneously made metagenomics easier, by making the sequencing process faster, and more difficult, by producing shorter read lengths than previous technologies. Methods for classifying sequences as short as 100 base pairs (bp) have until now been relatively inaccurate, requiring metagenomics projects to use older, long-read technologies. Phymm, a new classification approach for metagenomics data which uses interpolated Markov models (IMMs) to taxonomically classify DNA sequences, can accurately classify reads as short as 100 bp. Its accuracy for short reads represents a significant leap forward over previous composition-based classification methods. PhymmBL (rhymes with "thimble"), the hybrid classifier included in this distribution which combines analysis from both Phymm and BLAST, produces even higher accuracy.

Address of the bookmark: http://www.cbcb.umd.edu/software/phymm/

Shinyheatmap

Jit — Fri, 21 Oct 2016 05:12:11 -0500

Background: Transcriptomics, metabolomics, metagenomics, and other various next-generation sequencing (-omics) fields are known for their production of large datasets. Visualizing such big data has posed technical challenges in biology, both in terms of available computational resources as well as programming acumen. Since heatmaps are used to depict high-dimensional numerical data as a colored grid of cells, efficiency and speed have often proven to be critical considerations in the process of successfully converting data into graphics. For example, rendering interactive heatmaps from large input datasets (e.g., 100k+ rows) has been computationally infeasible on both desktop computers and web browsers. In addition to memory requirements, programming skills and knowledge have frequently been barriers-to-entry for creating highly customizable heatmaps. Results: We propose shinyheatmap: an advanced user-friendly heatmap software suite capable of efficiently creating highly customizable static and interactive biological heatmaps in a web browser. shinyheatmap is a low memory footprint program, making it particularly well-suited for the interactive visualization of extremely large datasets that cannot typically be computed in-memory due to size restrictions. Conclusions: shinyheatmap is hosted online as a freely available web server with an intuitive graphical user interface: http://shinyheatmap.com. The methods are implemented in R, and are available as part of the shinyheatmap project at: https://github.com/Bohdan-Khomtchouk/shinyheatmap.

More at http://biorxiv.org/content/early/2016/09/21/076463

Address of the bookmark: http://shinyheatmap.com/

HybPiper

Jit — Fri, 04 Nov 2016 05:02:10 -0500

HybPiper was designed for targeted sequence capture, in which DNA sequencing libraries are enriched for gene regions of interest, especially for phylogenetics. HybPiper is a suite of Python scripts that wrap and connect bioinformatics tools in order to extract target sequences from high-throughput DNA sequencing reads.

Targeted bait capture is a technique for sequencing many loci simultaneously based on bait sequences. HybPiper pipeline starts with high-throughput sequencing reads (for example from Illumina MiSeq), and assigns them to target genes using BLASTx or BWA. The reads are distributed to separate directories, where they are assembled separately using SPAdes. The main output is a FASTA file of the (in frame) CDS portion of the sample for each target region, and a separate file with the translated protein sequence.

HybPiper also includes post-processing scripts, run after the main pipeline, to also extract the intronic regions flanking each exon, investigate putative paralogs, and calculate sequencing depth. For more information, please see our wiki.

HybPiper is run separately for each sample (single or paired-end sequence reads). When HybPiper generates sequence files from the reads, it does so in a standardized directory hierarchy. Many of the post-processing scripts rely on this directory hierarchy, so do not modify it after running the initial pipeline. It is a good idea to run the pipeline for each sample from the same directory. You will end up with one directory per run of HybPiper, and some of the later scripts take advantage of this predictable directory structure.

Address of the bookmark: https://github.com/mossmatters/HybPiper