BOL: Related items

ART: Set of Simulation Tools

Jit — Thu, 03 Nov 2016 08:28:25 -0500

ART is a set of simulation tools to generate synthetic next-generation sequencing reads. ART simulates sequencing reads by mimicking real sequencing process with empirical error models or quality profiles summarized from large recalibrated sequencing data. ART can also simulate reads using user own read error model or quality profiles. ART supports simulation of single-end, paired-end/mate-pair reads of three major commercial next-generation sequencing platforms: Illumina's Solexa, Roche's 454 and Applied Biosystems' SOLiD. ART can be used to test or benchmark a variety of method or tools for next-generation sequencing data analysis, including read alignment, de novo assembly, SNP and structure variation discovery. ART was used as a primary tool for the simulation study of the 1000 Genomes Project . ART is implemented in C++ with optimized algorithms and is highly efficient in read simulation. ART outputs reads in the FASTQ format, and alignments in the ALN format. ART can also generate alignments in the SAM alignment or UCSC BED file format. ART can be used together with genome variants simulators (e.g. VarSim) for evaluating variant calling tools or methods.

Address of the bookmark: http://www.niehs.nih.gov/research/resources/software/biostatistics/art/

BIMA V3: an aligner customized for mate pair library sequencing

Abhimanyu Singh — Wed, 14 Dec 2016 15:20:00 -0600

Summary: Mate pair library sequencing is an effective and economical method for detecting genomic structural variants and chromosomal abnormalities. Unfortunately, the mapping and alignment of mate pair read pairs to a reference genome is a challenging and
time consuming process for most NGS alignment programs. Large insert sizes, introduction of library preparation protocol artifacts (biotin junction reads, paired-end read contamination, chimeras, etc.), and presence of structural variant breakpoints within reads increases mapping and alignment complexity. We describe an algorithm that is up to 20 times faster and 25% more accurate than popular NGS alignment programs when processing mate pair sequencing.
Availability: http://bioinformaticstools.mayo.edu/research/bima/
Contact: vasmatzis.george@mayo.edu

Address of the bookmark: http://bioinformatics.oxfordjournals.org/content/early/2014/02/12/bioinformatics.btu078.full.pdf

Pacbio Long Reads Compatible Software and Tools

Archana Malhotra — Wed, 15 Mar 2017 14:19:01 -0500

The following software packages are known to be compatible with PacBio® data, in addition to PacBio's own SMRT® Analysis suite. All packages are believed to be open source or freely available for non-commercial use. See the individual project sites for up-to-date license information. A separate page lists commercial software.

Know of any other open source software for PacBio data? Email us.

Software categories:

Address of the bookmark: https://github.com/PacificBiosciences/DevNet/wiki/Compatible-Software

CABOG: Celera Assembler with Best Overlap Graph

Abhimanyu Singh — Mon, 15 May 2017 05:04:39 -0500

CABOG (Celera Assembler with Best Overlap Graph) is scientific software for DNA research. CABOG has been a critical component of many genome sequencing projects. CABOG operates on small genomes such as bacterial as well as large genomes such as mammalian. CABOG is an extension of the Celera Assembler software that was originally developed at Celera for the 2001 publication of the first draft human genome sequence. The software was released to the public domain in 2004. Its open source repository on Source Forge is an internet resource for scientists around the world.

CABOG is one of many software programs called genome assemblers. These programs exist to overcome the fundamental limitation of all sequencing machines, namely, that they read out very few DNA letters at a time. These programs reconstruct genomes that are billions of letters long from the hundreds of letters per read that modern sequencers provide. What these programs do is often described as a scaled up version of a family solving a jigsaw puzzle.

The CABOG software was the first to accomplish many scientific goals. It was the first to assemble the genome of a multicellular organism (Drosophila melanogaster, 2000). It was the first to assemble both parental haplotypes of one human genome (J. Craig Venter, 2007). It was the first to assemble environmental sequence from the oceans (Sargasso Sea in 2004 and Global Ocean Sampling in 2007). It was first to combine reads from first-generation Sanger sequencing machines and second-generation pyrosequencing machines (Marine microbes, 2006). Today, CABOG is one of the leading assembly programs for data sets that include paired end data from the Roche 454 line of sequencing machines.

Address of the bookmark: http://www.jcvi.org/cms/research/projects/cabog/overview/

Flye: Fast and accurate de novo assembler for single molecule sequencing reads

BioJoker — Tue, 02 Apr 2019 21:54:55 -0500

Flye is a de novo assembler for single molecule sequencing reads, such as those produced by PacBio and Oxford Nanopore Technologies. It is designed for a wide range of datasets, from small bacterial projects to large mammalian-scale assemblies. The package represents a complete pipeline: it takes raw PB / ONT reads as input and outputs polished contigs. Flye also includes a special mode for metagenome assembly.

Address of the bookmark: https://github.com/fenderglass/Flye

RACA: Reference-Assisted Chromosome Assembly

Priya Singh — Wed, 06 Apr 2016 09:29:50 -0500

Rreference-Assisted Chromosome Assembly (RACA), an algorithm to reliably order and orient sequence scaffolds generated by NGS and assemblers into longer chromosomal fragments using comparative genome information and paired-end reads.

http://www.ncbi.nlm.nih.gov/pubmed/23307812

http://bioen-compbio.bioen.illinois.edu/RACA/

Address of the bookmark: http://bioen-compbio.bioen.illinois.edu/RACA/

Trimmomatic: A flexible read trimming tool for Illumina NGS data

Jit — Fri, 15 Apr 2016 05:58:53 -0500

Paired End:

java -jar trimmomatic-0.35.jar PE -phred33 input_forward.fq.gz input_reverse.fq.gz output_forward_paired.fq.gz output_forward_unpaired.fq.gz output_reverse_paired.fq.gz output_reverse_unpaired.fq.gz ILLUMINACLIP:TruSeq3-PE.fa:2:30:10 LEADING:3 TRAILING:3 SLIDINGWINDOW:4:15 MINLEN:36

This will perform the following:

Remove adapters (ILLUMINACLIP:TruSeq3-PE.fa:2:30:10)
Remove leading low quality or N bases (below quality 3) (LEADING:3)
Remove trailing low quality or N bases (below quality 3) (TRAILING:3)
Scan the read with a 4-base wide sliding window, cutting when the average quality per base drops below 15 (SLIDINGWINDOW:4:15)
Drop reads below the 36 bases long (MINLEN:36)

More at http://www.usadellab.org/cms/?page=trimmomatic

Address of the bookmark: http://www.usadellab.org/cms/?page=trimmomatic

PHYMMBL

Jit — Mon, 10 Oct 2016 08:56:34 -0500

Metagenomics sequencing projects collect samples of DNA from uncharacterized environments that may contain hundreds or even thousands of species. One of the main challenges in analyzing a metagenome is phylogenetic classification of raw sequence reads into groups representing the same or similar species. Such classification is a useful prerequisite for genome assembly and for analysis of the biological diversity present in a sample. The newest sequencing technologies have simultaneously made metagenomics easier, by making the sequencing process faster, and more difficult, by producing shorter read lengths than previous technologies. Methods for classifying sequences as short as 100 base pairs (bp) have until now been relatively inaccurate, requiring metagenomics projects to use older, long-read technologies. Phymm, a new classification approach for metagenomics data which uses interpolated Markov models (IMMs) to taxonomically classify DNA sequences, can accurately classify reads as short as 100 bp. Its accuracy for short reads represents a significant leap forward over previous composition-based classification methods. PhymmBL (rhymes with "thimble"), the hybrid classifier included in this distribution which combines analysis from both Phymm and BLAST, produces even higher accuracy.

Address of the bookmark: http://www.cbcb.umd.edu/software/phymm/

Software and Tools to detect structure variation with long reads !!

Archana Malhotra — Wed, 15 Mar 2017 14:31:09 -0500

Uncovering the connection between genetics and heritable diseases requires an approach that looks at all the variant bases and types in a genome. While a PacBio de novo assembly resolves the most novel SV variants. 8-10X PacBio coverage of single genomes or trios reveals triple the SVs detectable by short-read data.

With Single Molecule, Real-Time (SMRT) Sequencing, you can access structural variations having a broad range of sizes, types, and GC content with the ability to:

Uncover missing heritability linked to structural variation
Unambiguously identify genomic context and variant breakpoints at the sequence level to unravel the genetic etiology of disease
Resolve structural variation across the complete size spectrum with basepair resolution

Following are the SV tools, which can assist you to achieve your goal.

Sniffles: Structural variation caller using third generation sequencing

Sniffles is a structural variation caller using third generation sequencing (PacBio or Oxford Nanopore). It detects all types of SVs using evidence from split-read alignments, high-mismatch regions, and coverage analysis. Please note the current version of Sniffles requires sorted output from BWA-MEM (use -M and -x parameter) or NGM-LR with the optional SAM attributes enabled!

More at https://github.com/fritzsedlazeck/Sniffles

MultiBreak-SV: It identifies structural variants from next-generation paired end data, third-generation long read data, or data from a combination of sequencing platforms.

There are two pieces of software in this release: (1) a pre-processor that takes machineformat (.m5) BLASR files, and (2) MultiBreak-SV. For installation and usage instructions, see doc/MultiBreakSV-Manual.txt.

More at https://github.com/raphael-group/multibreak-sv

Parliament: A Structural Variation Tool. Why ask a single sv-detection approach to find every variant when you can have a parliament of tools deciding?

Publication about the algorithm and “…the first long-read characterization of structural variation in a diploid human personal genome…” (HS1011) - “Assessing structural variation in a personal genome—towards a human reference diploid genome”

More at https://sourceforge.net/projects/parliamentsv/

https://www.dnanexus.com/papers/Parliament_Info_Sheet.pdf

PBHoney: the structural variation discovery tool

PBHoney is an implementation of two variant-identification approaches designed to exploit the high mappability of long reads (i.e., greater than 10,000 bp). PBHoney considers both intra-read discordance and soft-clipped tails of long reads to identify structural variants.

Read The Paper http://www.biomedcentral.com/1471-2105/15/180/abstract

More at https://sourceforge.net/projects/pb-jelly/

SMRT-SV: Structural variant and indel caller for PacBio reads

Structural variant (SV) and indel caller for PacBio reads based on methods from Chaisson et al. 2014.

SMRT-SV provides an official software package for tools described in Chaisson et al. 2014 and adds several key features including the following.

Unified variant calling user interface with built-in cluster compute support
Small indel calling (2-49 bp)
Improved inversion calling (screenInversions)
Quality metric for SV calls based on number of local assemblies supporting each call
Higher sensitivity for SV calls using tiled local assemblies across the entire genome instead of "signature" regions
Genotyping of SVs with Illumina paired-end reads from WGS samples

More at https://github.com/EichlerLab/pacbio_variant_caller

Stacks

Jitendra Narayan — Wed, 24 Feb 2016 15:52:30 -0600

Stacks is a software pipeline for building loci from short-read sequences, such as those generated on the Illumina platform. Stacks was developed to work with restriction enzyme-based data, such as RAD-seq, for the purpose of building genetic maps and conducting population genomics and phylogeography.

More at http://catchenlab.life.illinois.edu/stacks/

Address of the bookmark: http://catchenlab.life.illinois.edu/stacks/