Quickstart

http://nanopolish.readthedocs.io/en/latest/quickstart_consensus.html

Algorithms

http://simpsonlab.github.io/2017/06/30/nanopolish-v0.7.0/

Address of the bookmark: https://github.com/jts/nanopolish

usage:   canu [-correct | -trim | -assemble | -trim-assemble] \
              [-s ] \
               -p  \
               -d  \
               genomeSize=[g|m|k] \
               -maxThreads=2 \
               useGrid=false \
              [other-options] \
               read_file.fastq.gz

A default Canu run produces usually high quality assembly, example of a command that was used for testing can be found below. However, there are still a lot of parameters that are possible to tweak. For example if we desire to assemble haplotypes separately of if we want to smash them together, we can alternate the error correction process.

canu -p test_asmbl \
     -d asm_test3 \
     genomeSize=2m \
     -maxThreads=2 useGrid=false \
     -pacbio-raw \ ~/pacbio/dna/sample_reads.fastq.gz

There is a brilliant section in documentation about parameter tweaking.

The output directory contains will contain many files. The most interesting ones are:

• *.correctedReads.fasta.gz : file containing the input sequences after correction, trim and split based on consensus evidence.
• *.trimmedReads.fastq : file containing the sequences after correction and final trimming
• *.layout : file containing informations about read inclusion in the final assembly
• *.gfa : file containing the assembly graph by Canu
• *.contigs.fasta : file containing everything that could be assembled and is part of the primary assembly

The basic stats of assembly can be read from reports generated by the assembler, or calculated using standard UNIX command line tools.

More at https://canu.readthedocs.io/en/latest/faq.html

Address of the bookmark: http://qb.cshl.edu/genomescope/

https://github.com/mvollger/SDA

Address of the bookmark: https://www.nature.com/articles/s41592-018-0236-3

This is necessary in light of the increasing use of higher level statistics in biomedical research. I hope it accomplishes this mission and encourage its free distribution and use as a course text or supplement.

K Seefeld, May 2007

1 Falcon https://github.com/PacificBiosciences/pb-assembly

2 Canu assembler http://canu.readthedocs.io/en/latest/index.html

3 Miniasm assembler https://github.com/lh3/miniasm

4 PBJelly scaffolding tool https://sourceforge.net/projects/pb-jelly/

5 ARCS scaffolding tool https://github.com/bcgsc/arcs

6 Redundans reduction and scaffolding tool https://github.com/Gabaldonlab/redundans

7 Arrow error correction https://github.com/PacificBiosciences/ GenomicConsensus

8 PILON error correction https://github.com/broadinstitute/pilon/wiki

9 BUSCO single copy gene markers http://busco.ezlab.org/

10 Bandage graph assembly viewer https://rrwick.github.io/Bandage/

11 Gepard dotter http://cube.univie.ac.at/gepard

12 MUMmer aligner and plotter http://mummer.sourceforge.net/

Run Maq Now

Follow these steps to try Maq. All you need is a reference sequence file in the FASTA format.

1. Prepare a reference sequence (ref.fasta). Better a bacterial genome.
2. Download maq, maq-data and maqview at the download page.
3. Copy maq, maq.pl and maq_eval.pl to the $PATH or to the same directory.
4. Simulate diploid reference and read sequences, map reads, call variants and evaluate the results in one go:

   maq.pl demo ref.fasta calib-30.dat
   

   where calib-30.dat is contained in maq-data.
5. View the alignment:

   cd maqdemo/easyrun;
   maqindex -i -c consensus.cns all.map;
   maqview -c consensus.cns all.map

Even for advanced maq users, running `maq.pl demo' is recommended. You may find something helpful.

Address of the bookmark: http://maq.sourceforge.net

http://compbio.cs.toronto.edu/prism/

Address of the bookmark: http://compbio.cs.toronto.edu/prism/

1. SPAdes: An assembler specifically designed for single-cell and multi-cell bacterial genomes, as well as small eukaryotic genomes.

2. ABySS: A parallelized assembler for large genomes that uses de Bruijn graphs.

3. Velvet: Another de Bruijn graph-based assembler optimized for short-read sequencing data.

4. SOAPdenovo: A de Bruijn graph-based assembler designed for short reads, widely used for assembling large and complex genomes.

5. MaSuRCA: A hybrid assembler that combines data from multiple sequencing technologies, such as Illumina and PacBio.

6. Canu: A long-read assembler optimized for PacBio and Oxford Nanopore sequencing data.

7. Flye: A long-read assembler suitable for bacterial and small eukaryotic genomes.

8. SMARTdenovo: An assembler designed for long reads, particularly suited for PacBio data.

9. SPAdes Long Read (SPAdesLR): An extension of SPAdes for long-read data, such as those from PacBio or Nanopore.

10. Minia: An assembler optimized for low memory consumption, suitable for small and medium-sized genomes.

11. Unicycler: A hybrid assembler that combines short and long reads for circular bacterial genome assembly.

12. wtdbg2: A de Bruijn graph assembler for long reads, efficient for very large genomes.

13. Shasta: A long-read assembler that uses the Overlap-Layout-Consensus approach, suitable for PacBio and Nanopore data.

14. Sparc: An assembler designed to handle noisy long reads from Nanopore sequencing.

15. CANA: An assembler for metagenomic data, particularly for complex and diverse microbial communities.

16. Ra Assembler: A metagenome assembler for long reads, designed for highly complex metagenomic samples.

Please note that the field of bioinformatics is constantly evolving, and new assembly tools may have emerged since my last update. Additionally, the performance of these tools can vary depending on the characteristics of the sequencing data and the genome being assembled. When selecting an assembly tool, consider the specific requirements of your project, the available data types, and the computational resources at your disposal. Always refer to the respective tool's documentation and publications for the most up-to-date information and recommendations.

• paired-end (PE) and/or mate-pair libraries (NGS-based mode)
• long reads (NGS-based mode)
• synteny to the genome of some related species (reference-based mode)

Scaffolding 

In reference-based mode, pyScaf uses synteny to the genome of closely related species in order to order contigs and estimate distances between adjacent contigs.

Contigs are aligned globally (end-to-end) onto reference chromosomes, ignoring:

• matches not satisfying cut-offs (--identity and --overlap)
• suboptimal matches (only best match of each query to reference is kept)
• and removing overlapping matches on reference.

In preliminary tests, pyScaf performed superbly on simulated heterozygous genomes based on C. parapsilosis (13 Mb; CANPA) and A. thaliana (119 Mb; ARATH) chromosomes, reconstructing correctly all chromosomes always for CANPA and nearly always for ARATH (Figures in dropbox, CANPA table, ARATH table).
Runs took ~0.5 min for CANPA on 4 CPUs and ~2 min for ARATH on 16 CPUs.

Important remarks:

• Reduce your assembly before (fasta2homozygous.py) as any redundancy will likely break the synteny.
• pyScaf works better with contigs than scaffolds, as scaffolds are often affected by mis-assemblies (no de novo assembler / scaffolder is perfect...), which breaks synteny.
• pyScaf works very well if divergence between reference genome and assembled contigs is below 20% at nucleotide level.
• pyScaf deals with large rearrangements ie. deletions, insertion, inversions, translocations. Note however, this is experimental implementation!
• Consider closing gaps after scaffolding.

Address of the bookmark: https://github.com/lpryszcz/pyScaf