1. Update new things continuously
As per my personal experience, it’s not always easy to work as a bioinformatician!  There are couple of reasons to say that; First computational part of biology make our life’s a little harder compared to other professional categories. The fact - for instance - that the technology cycle in the bioinformatics world is very short, the actual knowledge becomes outdated in a few months or years. Therefore, we need to learn continuously - new things get important. Second, to stay on top of things we really need the strong will to be good at our job. That's probably the most important characteristic to bioinformatician. They are usually an excellent knowledge worker with great technical abilities, and have the will to be that over decades!

2. Avoid the sentence "I did not know what to do!"
In our computational biology lab, we generally face lots of technical problems. But as you know, it's impossible to know everything to do the computational biology jobs ( Yup.. because you need diverse and multidisciplinary knowledge to understand biological problems and resolve their respective solutions), therefore it's absolutely necessary that a bioinformatician finds its way through a new topic. How I typically do that is I use google and I talk to other experts in our laboratory or online biostar community to find out what they think. "I did not know what to do!" should not be an argument for us.

3. To make oneself useful
Several time it does happen, you finished our task earlier than expected; in such cases if you have some time left then: Take a coffee and play chess; reversi, etc. In my case I take a rest. Afterwards I think about what I could do that helps the team to achieve its targets, 'cause some of my team mates probably didn't finish! (at least if I didn't met them at coffee bar !!)

4. Care for all
During my rigorous research duration; I attended several workshop organized by my University departments. I had a discussion with other research fellow, professors; I generally ask … what it really takes to make a team successful or to be a successful research leader. They always said: "Well, you need some caring people!" I think there is a lot truth in that statement. If we do not care about quality, timelines, good team culture, respectful communication (!!), clean code, if all this doesn’t matter to us, then I believe the probability is higher that we fail in research and analysis.

5. Be good with people
Because bioinformatician and computational biologist jobs typically involves to work in a (most wanted J cross-departmental!) team, therefore it's important that we're (more or less) good in dealing with other individuals. Everyone have their own strengths and weaknesses, just like us. It's important to treat all the research team mates with respect, regardless of their technical competence or contributions. Of course, sometimes people deserve a clear statement (!!!), but try to do these things one-on-one. Make sure nobody loses his face. Attend the meetings at the coffee bar; be good at table top soccer and go out once in a while to have a beer with your team. You know what I'm talking about.

At the end of a week I look back and I ask myself what I have produced. This could be paperwork, community days or (best!!) programming code. Always remember there is always a solution to a problem. Most of the times there are at least three solutions. So, don’t just blame, suggest a solution.

That's it. I am looking forward to your thoughts and comments!

Address of the bookmark: https://github.com/imgag/ClinCNV

For knowledge about Linux and their importance amongst bioinformatician plesae read this article "An introduction to Linux for bioinformatics" by Paul Stothard.

Linux cheat sheet at http://bioinformaticsonline.com/file/view/87/linux-cheat-sheet

Please browse for futher useful linux pages on right hand side ...

Screen is like a window manager for your console. It will allow you to keep multiple terminal sessions running and easily switch between them. It also protects you from disconnection, because the screen session doesn’t end when you get disconnected.

You’ll need to make sure that screen is installed on the server you are connecting to. If that server is Ubuntu or Debian, just use this command:

sudo apt-get install screen

Now you can start a new screen session by just typing screen at the command line. You’ll be shown some information about screen. Hit enter, and you’ll be at a normal prompt.

To disconnect (but leave the session running)

Hit Ctrl + A and then Ctrl + D in immediate succession. You will see the message [detached]

To reconnect to an already running session

screen -r

To reconnect to an existing session, or create a new one if none exists

screen -D -r

To create a new window inside of a running screen session

Hit Ctrl + A and then C in immediate succession. You will see a new prompt.

To switch from one screen window to another

Hit Ctrl + A and then Ctrl + A in immediate succession.

To list open screen windows

Hit Ctrl + A and then W in immediate succession

• Filters SNVs from any variant caller to remove false positives
• Calculates metrics based on BAM files and provides filtering not possible with other tools
• Fully user-configurable filtering (including which filters to use and their thresholds)
• Option to use filters identical to ICGC recommendations

FiNGS provides researchers with a tool to reproducibly filter somatic variants that is simple to both deploy and use, with filters and thresholds that are fully configurable by the user. It ingests and emits standard variant call format (VCF) files and will slot into existing sequencing pipelines. It allows users to develop and implement their own filtering strategies and simple sharing of these with others.

FiNGS reliably improves upon the precision of default variant caller outputs and performs better than other tools designed for the same task.

Address of the bookmark: https://github.com/cpwardell/FiNGS

'du' – Check the size of a directory

$ du
This command ( du) gives you a list of directories that exist in the current working directory along with their sizes in kilobytes (default). The last line of the output gives you the total size of the current directory including its subdirectories.

$ du /home/jin1
The above command would give you the directory size of the directory /home/david

$ du -h
The same “du”command with some flag gives you a better output than the default one. The option '-h' stands for human readable format. Therefore, in order to print the sizes of the files / directories in your desire notation use this time suffixed with a 'k' if its kilobytes and 'M' if its Megabytes and 'G' if its Gigabytes.

$ du -ah
If you are interested in checking everything present in a folder use above mentioned command. It gives us not only the directories but also all the files that are present in the current directory. The “-a” flag displays the filenames along with the directory names in the output.

$ du -c
This gives you a grand total as the last line of the output. So if your directory occupies 30MB the last 2 lines of the output would be 30M.

$ du -s
Use this command to displays a summary of the directory size. It is the simplest way to know the total size of the current directory.

$ du -S
This would display the size of the current directory excluding the size of the subdirectories that exist within that directory. So it basically shows you the total size of all the files that exist in the current directory.

$ du --exculde=mp3
Several times it required to exclude some directory in our size calculation. In such cases the above command would display the size of the current directory along with all its subdirectories, but it would exclude all the files having the given pattern present in their filenames.

'df' - finding the disk free space / disk usage

$ df
Hmmm … now “df” command is really useful, and I guess you are going to use it over time. Typing the above command, outputs a table consisting of 6 columns. All the columns are very easy to understand. Remember that the 'Size', 'Used' and 'Avail' columns use kilobytes as the unit. The 'Use%' column shows the usage as a percentage which is also very useful.

$ df -h
Displays the same output as the previous command but the '-h' indicates human readable format. Hence instead of kilobytes as the unit the output would have 'M' for Megabytes and 'G' for Gigabytes.

Example: Linux installed on /dev/hda1
$ df -h | grep /dev/hda1

All right, this is not the only option to check the sizes and free spaces but there are a few more options that can be used with 'du' and 'df' . I will discuss it later.

Variant calling and/or genotyping

• DiscoSNP++ and discoSnpRAD: Reference-free small variant discovery (SNPs and indels)
• MindTheGap: Detection and assembly of large insertion variants
• TakeABreak: reference-free inversion discovery tool
• SVJedi: Structural Variant genotyper with long read data
• SVJedi-graph: Structural Variant genotyper with long read data using a variation graph

Sequence assembly

• MinYS: reference-guided genome assembly in metagenomics data
• MTG-link: local assembly tool for linked-read data
• Minia: De novo short read assembler
• de-novo pipeline: de-novo assembly pipeline (error correction / contigs / scaffolding) for genomes and meta-genomes
• Mapsembler2: Targeted assembly (not maintained)

Managing k-mers & indexation

• findere: simple strategy for speeding up queries and for reducing false positive calls from any Approximate Membership Query data structure.
  • fimpera extends findere adding the abundance information.
• kmtricks: modular tool suite for counting kmers, and constructing Bloom filters or kmer matrices, for large collections of sequencing data.
• kmindex is a tool for indexing and querying sequencing samples. It is built on top of kmtricks.
• back to sequences: Find sequences (reads, unitigs, genes) related to a set of kmers in large datasets, in a matter of seconds.
• Backpack Quotient Filter: k-mer indexing data structure with abundance
• short read connector: Detect similar reads from potentially large read set
• DSK: Count K-mer in sequences

Pangenome graph manipulation

• Pancat: Pangenome Comparison and Analysis Toolkit
• GFAGraphs: a Python library to handle pangenome graph files in GFA format.

Comparative metagenomics with k-mers

• Simka and SimkaMin: Comparative metagenomics for large-scale datasets
• Comparead & Commet: comparison of metagenomic datasets

Species and bacterial strains identification

• ORI: software using long nanopore reads to identify bacteria present in a sample at the strain level
• StrainFLAIR: STRAIN-level proFiLing using vArIation gRaph

General-purpose sequencing data manipulation

• GASSST: long read mapper
• Leon: short read compressor (now included in GATB-core)
• Bloocoo: short read corrector
• BCALM: Construct compacted de Bruijn graphs (unitigs)

 Protein Structure

• A_Purva: Contact Map Overlap solver
• MD-Jeep: Distance Geometry solver
• CSA: Comparative Structural Alignment

Workflow

• SLICEE: parallel execution of bioinformatics workflows

Comparative Genomics

• CASSIS: detection of rearrangement breakpoints
• PLAST: intensive bank-to-bank sequence comparison
• DRJBreakpointFinder: detection and precise localization of excision sites in proviral segments

(details of experience required)
Pay Scale:
INR Rs.12000/-P.M. + HRA
Category:
Science and Research Jobs
How To Apply:
The interested candidates should report for the Interview on 31st
March, 2014 at 10:00 am in the Conference Room of Dean, School of Biotechnology, First floor, Gautam Buddha University, Greater
Noida. Interested candidates may also send their resume to undersigned by post-mail/e-mail shaktis@gbu.ac.in or shaktisahi@gmail.com. No TA and DA will be paid for appearing for the interview
Download Official Notification:

http://www.gbu.ac.in/Recruitment/JRF_advertisement_DSTProject_Shakti_24March14.pdf

minimap -t 24 assembly.fasta long_reads.fastq.gz | racon -t 24 long_reads.fastq.gz - assembly.fasta racon_assembly.fasta
nucmer -p nucmer assembly.fasta racon_assembly.fasta
show-snps -C -T -r nucmer.delta

This reports Racon's changes in a table. You can exclude indels with the -I option in show-snps. 

This process (Racon -> MUMmer -> SNP table) solves the problem I originally raised in this issue. So as far as I'm concerned, you can close this issue (or keep it open if you still want to implement some kind of variant table).

No. CBSH/MBGE/356

Subject: Advertisement for the award of Junior Research Fellowship.

Applications are invited for award of one Junior Research Fellowship on a consolidated fellowship of Rs. 12,000/- pm in the project “Bioinformatics Sub-DIC ”, under the Coordinatorship Dr. Anil Kumar. The fellowship is purely temporary and may continue till the duration of the project or maximum three years which ever is earlier. The appointment shall be given on six monthly review basis.

ESSENTIAL QUALIFICATION

M.Sc. Bioinformatics having research experience on In silico experimentation.

Candidates possessing the above qualifications may submit their application on
plain paper in the following format to the undersigned latest 18 April, 2014 the interviews will be held on 19 April, 2014 at 11.00 AM in the office of the undersigned. No separate letter for interview will be issued or any TA/DA will be paid for attending the interview.

Advertisement: http://www.gbpuat.ac.in/01042014_18april14_Advertisement%20for%20JRF%20Position,%20BI.pdf