BOL: Related items

Sybil

Jit — Wed, 07 Sep 2016 03:20:44 -0500

The Sybil software package provides a primarily web-based front-end to comparative genome datasets warehoused in a chado relational database. It was developed by the bioinformatics department at The Institute for Genomic Research (TIGR) and development continues at the J. Craig Venter Institute (JCVI) and the Institute for Genome Sciences (IGS) at the University of Maryland: Baltimore. Sybil has been used at TIGR/JCVI, IGS, NYU, New York Medical College, Novartis Vaccines and University of Maryland: College Park to support a number of research projects that involve comparative genome analysis. The following sections provide some high-level technical details about the overall architecture and external dependencies of the Sybil package.

Address of the bookmark: http://sybil.sourceforge.net/

Nemo – A stochastic, individual-base, genetically explicit simulation platform

Jit — Sat, 01 Oct 2016 14:45:02 -0500

A recombination map has been added for all multi-locus traits. The map positions (chromosomal) for neutral markers (e.g. SNPs) and loci under selection (QTLs, deleterious mutations, DMIs) can now be specified explicitly, or set at random. The map can hold an unlimited number of loci of different types jointly, at any recombination scale (cM or lower). The effects of linkage can thus be finely explored.
A new trait coding for (Bateson-)Dobzhansky-Muller incompatibility loci. Multiple haploid or diploid pairs of incompatible loci can be spread throughout the genome and affect individual fitness.
Multi-type selection: Individual fitness can be jointly determined by different types of loci under selectinon, such as QTLs coding for quantitative traits under spatially variable selection, universally deleterious mutations, and Dobzhansky-Muller incompatibility loci.
An unlimited number of quantitative traits under different forms of selection can be modelled, based on universally pleiotropic loci with several bi- or multi-allelic models.
Spatial and temporal variation of selection on quantitative traits is possible, modelling shifts of environmental conditions over time.
The dispersal matrix describing the movement of individuals among sub-populations can be replaced by a connectivity matrix and a reduced dispersal matrix describing migration only among the connected sub-populations. This offers a substantial gain in computing time and system memory when simulating very large grids.
Input parameters' arguments may be specified in separate files. This is particularly convenient when specifying large matrices.
Many adjustments have been made for refined control of the input of parameters and data output. See updates in the manual.

Address of the bookmark: http://nemo2.sourceforge.net/index.html

BBMap help

Shruti Paniwala — Mon, 10 Oct 2016 06:29:03 -0500

BBMAP • a solution for everything

That content has been reformatted and it is being expanded to include more information.

There are common options for most BBMap suite programs and depending on the file extension the input/output format is automatically chosen/set.

Using BBMap

Mapping Nanopore reads

BBMap.sh has a length cap of 6kbp. Reads longer than this will be broken into 6kbp pieces and mapped independently.

More at https://www.biostarhandbook.com/tools/bbmap/bbmap-help.html

Address of the bookmark: https://www.biostarhandbook.com/tools/bbmap/bbmap-help.html

Graph Genome Suite

Jit — Fri, 28 Oct 2016 07:59:54 -0500

Seven Bridges is the biomedical data analysis company accelerating breakthroughs in genomics research for cancer, drug development and precision medicine. We build self-improving systems to analyze millions of genomes, including the Graph Genome Suite — the most advanced population genomics tools in the world.

Address of the bookmark: https://www.sbgenomics.com/graph/

LINKS

Jit — Fri, 04 Nov 2016 06:19:01 -0500

LINKS is a genomics application for scaffolding genome assemblies with long reads, such as those produced by Oxford Nanopore Technologies Ltd. It can be used to scaffold high-quality draft genome assemblies with any long sequences (eg. ONT reads, PacBio reads, another draft genomes, etc)

Paper at https://gigascience.biomedcentral.com/articles/10.1186/s13742-015-0076-3

Address of the bookmark: https://github.com/warrenlr/LINKS/

HGA

Jit — Tue, 29 Nov 2016 07:25:53 -0600

HGA tool version 1.0 This tool helps to apply the Hierarchical Genome Assembly (HGA) method. The tool will apply: 1. Partitioning a given reads dataset into a given number of partitions. 2. Assembling each partitions using a pre-specified assembler (Velvet or SPAdes in this version) and using a given kmer size. 3. Merging all the assemblies of the partition. 4. Combining all the assemblies of the partition (using velvet with kmer value of 31). 5. Finaly, re-assembling the whole dataset with the merged contigs or the combined contigs, using a given kmer size.

https://github.com/aalokaily/Hierarchical-Genome-Assembly-HGA

Address of the bookmark: https://github.com/aalokaily/Hierarchical-Genome-Assembly-HGA

Scripts

Jit — Wed, 30 Nov 2016 10:35:15 -0600

Useful script for NGS analysis.

Address of the bookmark: http://augustus.gobics.de/binaries/scripts/

e-RGA: enhanced Reference Guided Assembly of Complex Genomes

Jit — Mon, 19 Dec 2016 05:56:14 -0600

Next Generation Sequencing has totally changed genomics: we are able to produce huge amounts of data at an incredibly low cost compared to Sanger sequencing. Despite this, some old problems have become even more difficult, de novo assembly being on top of this list. Despite efforts to design tools able to assemble, de novo, an organism sequenced with short reads, the results are still far from those achievable with long reads. In this paper, we propose a novel method that aims to improve de novo assembly in the presence of a closely related reference. The idea is to combine de novo and reference-guided assembly in order to obtain enhanced results.

Address of the bookmark: http://journal.embnet.org/index.php/embnetjournal/article/view/208

fqtools

Jit — Thu, 08 Dec 2016 09:31:12 -0600

fqtools is a software suite for fast processing of FASTQ files. Various file manipulations are supported. See below for a full list of the subcommands available and a brief description of their purpose. Most of the individual subcommands will take either a single file or a pair of files as input. If no input file is specified, fqtools will attempt to read data from stdin. In this case, it is advisabe to specify the format of the data provided. For subcommands that generate FASTQ data, either a single file or a pair of files will be generated. If no -o argument is provided, single files will be writted to stdout.

Address of the bookmark: https://github.com/alastair-droop/fqtools

Structural variation: the hidden genomic treasure

Jit — Sat, 10 Dec 2016 16:19:09 -0600

Genome re-sequencing projects have revealed substantial amounts of genetic variation between individuals extending beyond single nucleotide polymorphisms (SNPs) and short indels. Structural Variations (SVs) and Copy Number Variations (CNVs) are a major source of genomic variation. However, compared to SNPs, accurate detection, genotyping and understanding of CNVs is lagging behind due to much greater analytical challenges related to SV/CNV detection and analysis. In our lab we analyse SVs/CNVs using high-throughput sequencing and different analytical approaches. The most‐studied structural variants are copy number variations (CNVs) which can be generated by several different mechanisms including non‐allelic homologous recombination, non‐homologous end‐joining and deoxyribonucleic acid (DNA) replication‐related fork stalling and template switching. CNVs are closely related to segmental duplications (SDs): SDs can stimulate the formation of CNVs and themselves started out as CNVs, but became fixed in a species. Structural variation can be neutral but has also influenced our phenotypic evolution, for example our susceptibility to disease and our ability to digest certain types of food. Our understanding of the extent of structural variation is increasing rapidly, but it will be much more difficult to understand its phenotypic consequences.

Structural variants (SVs) such as deletions, insertions, duplications, inversions and translocations litter genomes and are often associated with gene expression changes and severe phenotypes (ie. genetic diseases in humans). Recent studies on the functional aspects of different types of SVs have unveiled several cases of adaptive evolution. For example, inversions have been associated with ecological adaptations and may facilitate speciation. Due to their prevalent nature, SVs arguably have a large impact on genome evolution and should not be neglected when studying the genetics of adaptation and speciation. SVs were classically defined as chromosomal rearrangements larger than 1kb, but due to a higher resolution of new detection methods, smaller variants (between 50 and 1000 base pairs) can now be accurately assessed. Besides various methods of detection in next generation sequencing data (paired end mapping, split reads, and depth of coverage), array-based approaches have proven to be particularly useful for detecting copy number variations (CNVs). These technologies have enabled researchers to catalog a wide spectrum of SVs in many organisms and infer the effects of selection shaping their evolutionary trajectories.

Structure variation sequencing signature (Source: NatRev Genetics)

Related tools, databases and publications are listed below. If you know any interesing papers, please let us know in comment section:

Key concepts

Structural variation includes balanced variants such as inversions and translocations, and unbalanced ones such as duplications and deletions (copy number variations or CNVs).

Structural variants can arise by several mechanisms, including nonallelic homologous recombination (NAHR), nonhomologous end‐joining (NHEJ) and DNA replication‐based fork stalling and template switching (FoSTeS).

CNV is closely linked to segmental duplication, but is not exactly the same. Segmental duplications can stimulate CNV formation by NAHR, and themselves arise from CNVs that have become fixed.

Segmental duplications did not appear uniformly during the evolution of the Great Ape species, but rather during a burst of activity around the time of the divergence of gorilla from the human/chimpanzee ancestor.

Duplicated genes play a critical role in the evolution of a genome as they act as ‘spare parts’ than can evolve to perform new or more specialized functions.

Effects of structural variation on gene expression can be identified but only a few examples of the consequences for species biology have been documented.

Tools

CNVnatora tool for CNV discovery and genotyping from depth of read mapping.2011a,2011b

AGEa tools that implements an algorithm for optimal alignment of sequences with SVs.2011

BreakSeqa pipeline for annotation, classification and analysis of SVs at single nucleotide resolution.2010

PEMera computational and simulation framework for discovering SVs by paired-end read mapping.2009,2007

GASV https://code.google.com/archive/p/gasv/

PAIROSCOPE http://pairoscope.sourceforge.net/

SVDetect http://svdetect.sourceforge.net/Site/Home.html

BreakPtr, discovery of unbalanced structural variants (copy-number variants) with tiling microarrays Link

R Package https://www.bioconductor.org/help/course-materials/2010/EMBL2010/Practical-4-StructuralVariants.pdf

BreakSeq, structural variant genotyping using split reads Link

CopySeq, genotyping of unbalanced structural variants (copy-number variants) using read-depth Link

DELLY2, integrated structural variant discovery, genotyping and visualization in deep sequencing data Link

PEMer, structural variant discovery in 454 sequencing data by paired-end mapping Link

TIGER, transduction inference in germline genomes using short read data Link

MANTA https://github.com/Illumina/manta

SV-Bay https://github.com/InstitutCurie/SV-Bay

BreakDancer http://breakdancer.sourceforge.net/

Variation Hunter http://compbio.cs.sfu.ca/software-variation-hunter

Lumpy https://github.com/arq5x/lumpy-sv

ForestSV http://sebatlab.ucsd.edu/index.php/software-data

PBSuites for long reads https://sourceforge.net/projects/pb-jelly/

Visualization

The SV visualization tool: http://genomesavant.com/savant/

InGAP-SV (http://ingap.sourceforge.net/) that is nice tools for both detection and visualisation of severals kind of structural variations (Large insertions, translocation, deletion, inversions....)

Tools table: http://www.nature.com/nbt/journal/v29/n8/fig_tab/nbt.1904_T2.html

Variation Viewer https://www.ncbi.nlm.nih.gov/variation/view/

Papers

http://www.nature.com/nmeth/journal/v9/n2/full/nmeth.1858.html

http://journal.frontiersin.org/researchtopic/1412/structural-variations-in-genomes-ecological-and-evolutionary-implications

http://www.mi.fu-berlin.de/wiki/pub/ABI/GenomicsLecture10Materials/structural-variation.pdf

http://bmcgenomics.biomedcentral.com/articles/10.1186/s12864-015-1479-3

https://www.ncbi.nlm.nih.gov/dbvar/content/overview/

http://www.nature.com/subjects/structural-variation

https://eichlerlab.gs.washington.edu/news/NatMeth_Feb2012.pdf

https://www.ncbi.nlm.nih.gov/pubmed/19477992 ***

https://www.ncbi.nlm.nih.gov/pubmed/22452995

http://biorxiv.org/content/early/2016/09/06/073833

https://www.ncbi.nlm.nih.gov/pmc/articles/PMC4479793/

http://www.nature.com/articles/srep18501

http://www.genetics.org/content/202/1/351

http://www.cs.cmu.edu/~sssykim/teaching/s13/slides/Lecture_SVI.pdf

https://www.omicsonline.org/open-access/structural-variation-detection-from-next-generation-sequencing-2469-9853-S1-007.php?aid=69055

http://schatzlab.cshl.edu/presentations/2016/2016.01.12.PAG.Structural%20Variations.pdf