BOL: Related items

R Graphical Cookbook by Winston Chang

Abhimanyu Singh — Fri, 04 Nov 2016 12:50:30 -0500

R Graphical Cookbook by Winston Chang

A very nice book by Winston Chang for R ethusiast. The R code presented in these pages is the R code actually used to produce the Figures in the book. There will be differences compared to the code chunks shown in the text of the book, but in most cases the differences will be that these pages contain additional code to lay out multiple plots on a single "page".

The code presented for each figure is self-contained, i.e., all code required to produce the figure is included. This means that there is sometimes considerable overlap of code between several figures In some cases, it may be necessary to install an add-on package from CRAN to get the code to run.

More books at http://www.e-reading.club/bookreader.php/137370/C486x_APPb.pdf

HapSolo: An optimization approach for removing secondary haplotigs during diploid genome assembly and scaffolding.

Jit — Mon, 26 Oct 2020 21:23:36 -0500

Despite marked recent improvements in long-read sequencing technology, the assembly of diploid genomes remains a difficult task. A major obstacle is distinguishing between alternative contigs that represent highly heterozygous regions. If primary and secondary contigs are not properly identified, the primary assembly will overrepresent both the size and complexity of the genome, which complicates downstream analysis such as scaffolding.

More at https://github.com/esolares/HapSolo

Address of the bookmark: https://github.com/esolares/HapSolo

HapSolo: An optimization approach for removing secondary haplotigs during diploid genome assembly and scaffolding

Jit — Sat, 08 May 2021 21:25:00 -0500

HapSolo, that identifies secondary contigs and defines a primary assembly based on multiple pairwise contig alignment metrics. HapSolo evaluates candidate primary assemblies using BUSCO scores and then distinguishes among candidate assemblies using a cost function. The cost function can be defined by the user but by default considers the number of missing, duplicated and single BUSCO genes within the assembly. HapSolo performs hill climbing to minimize cost over thousands of candidate assemblies.

Address of the bookmark: https://github.com/esolares/HapSolo

Illumina based assembly pipeline steps !

Surabhi Chaudhary — Fri, 10 Dec 2021 06:22:54 -0600

Illumina

Merge re-sequenced FastQ files (cat)
Read QC (FastQC)
Adapter trimming (fastp)
Removal of host reads (Kraken 2; optional)
Variant calling
1. Read alignment (Bowtie 2)
2. Sort and index alignments (SAMtools)
3. Primer sequence removal (iVar; amplicon data only)
4. Duplicate read marking (picard; optional)
5. Alignment-level QC (picard, SAMtools)
6. Genome-wide and amplicon coverage QC plots (mosdepth)
7. Choice of multiple variant calling and consensus sequence generation routes (iVar variants and consensus; default for amplicon data || BCFTools, BEDTools; default for metagenomics data)
  - Variant annotation (SnpEff, SnpSift)
  - Consensus assessment report (QUAST)
  - Lineage analysis (Pangolin)
  - Clade assignment, mutation calling and sequence quality checks (Nextclade)
  - Individual variant screenshots with annotation tracks (ASCIIGenome)
8. Intersect variants across callers (BCFTools)
De novo assembly
1. Primer trimming (Cutadapt; amplicon data only)
2. Choice of multiple assembly tools (SPAdes || Unicycler || minia)
  - Blast to reference genome (blastn)
  - Contiguate assembly (ABACAS)
  - Assembly report (PlasmidID)
  - Assembly assessment report (QUAST)
Present QC and visualisation for raw read, alignment, assembly and variant calling results (MultiQC)

MitoHiFi: a python pipeline for mitochondrial genome assembly from PacBio high fidelity reads

Abhi — Tue, 05 Sep 2023 07:31:35 -0500

MitoHiFi v3.2 is a python pipeline distributed under MIT License !

MitoHiFi was first developed to assemble the mitogenomes for a wide range of species in the Darwin Tree of Life Project (DToL)

https://bmcbioinformatics.biomedcentral.com/articles/10.1186/s12859-023-05385-y

Address of the bookmark: https://github.com/marcelauliano/MitoHiFi

fqtools

Jit — Thu, 08 Dec 2016 09:31:12 -0600

fqtools is a software suite for fast processing of FASTQ files. Various file manipulations are supported. See below for a full list of the subcommands available and a brief description of their purpose. Most of the individual subcommands will take either a single file or a pair of files as input. If no input file is specified, fqtools will attempt to read data from stdin. In this case, it is advisabe to specify the format of the data provided. For subcommands that generate FASTQ data, either a single file or a pair of files will be generated. If no -o argument is provided, single files will be writted to stdout.

Address of the bookmark: https://github.com/alastair-droop/fqtools

REAPR: a universal tool for genome assembly evaluation

Jitendra Prajapati — Wed, 06 Apr 2016 18:26:31 -0500

REAPR is a tool that evaluates the accuracy of a genome assembly using mapped paired end reads, without the use of a reference genome for comparison. It can be used in any stage of an assembly pipeline to automatically break incorrect scaffolds and flag other errors in an assembly for manual inspection. It reports mis-assemblies and other warnings, and produces a new broken assembly based on the error calls.

The software requires as input an assembly in FASTA format and paired reads mapped to the assembly in a BAM file. Mapping information such as the fragment coverage and insert size distribution is analysed to locate mis-assemblies. REAPR works best using mapped read pairs from a large insert library (at least 1000bp). Additionally, if a short insert Illumina library is also available, REAPR can combine this with the large insert library in order to score each base of the assembly.

http://www.sanger.ac.uk/science/tools/reapr

Address of the bookmark: https://genomebiology.biomedcentral.com/articles/10.1186/gb-2013-14-5-r47

Progressive Cactus

Jit — Tue, 17 Jan 2017 03:40:06 -0600

v0.0 by Glenn Hickey (hickey@soe.ucsc.edu)

Progressive Cactus is a whole-genome alignment package.

Requirements

git
gcc 4.2 or newer
python 2.7
wget
64bit processor and build environment
150GB+ of memory on at least one machine when aligning mammal-sized genomes; less memory is needed for smaller genomes.
Parasol or SGE for cluster support.
750M disk space

Instructions

IMPORTANT NOTE: Progressive Cactus does not presently support installation into paths that contain spaces. Until this is resolved, you can use a softlink as a workaround: ln -s "path with spaces" "installation path without spaces"

In the parent directory of where you want Progressive Cactus installed:

git clone git://github.com/glennhickey/progressiveCactus.git
cd progressiveCactus
git pull
git submodule update --init
make

It is also convenient to add the location of progressiveCactus/bin to your PATH environment variable. In order to run the included tools (ex hal2maf) in the submodules/ directory structure, first source progressiveCactus/environment to load the installed environment.

If any errors occur during the build process, you are unlikely to be able to use the tool. Please submit a GitHub issue so we can help out: not only will you help yourself, but others who wish to use the tool as well.

Note that all dependencies are also built and included in the submodules/ directory. This increases the size and build time but greatly simplifies installation and version management. The installation does not create or modify any files outside the progressiveCactus/ directory.

Address of the bookmark: https://github.com/glennhickey/progressiveCactus

Bambus

Jit — Tue, 16 Aug 2016 08:09:15 -0500

Bambus 2.0, the second generation Bambus scaffolder available as an open source package. While most other scaffolders are closely tied to a specific assembly program, Bambus accepts the output from most current assemblers and provides the user with great flexibility in choosing the scaffolding parameters. In particular, Bambus is able to accept contig linking data other than specified by mate-pairs. Such sources of information include alignment to a reference genome (Bambus can directly use the output of MUMmer), physical mapping data, or information about gene synteny.

Home Page:

http://sourceforge.net/apps/mediawiki/amos/index.php?title=Bambus2

Address of the bookmark: https://www.cbcb.umd.edu/software/bambus2

Cgaln

Jit — Wed, 22 Feb 2017 05:14:15 -0600

Cgaln (Coarse grained alignment) is a program designed to align a pair of whole genomic sequences of not only bacteria but also entire chromosomes of vertebrates on a nominal desktop computer. Cgaln performs an alignment job in two steps, at the block level and then at the nucleotide level. The former "coarse-grained" alignment can explore genomic rearrangements and reduce the regions to be analyzed in the next step. The latter is devoted to detailed alignment within the limited regions found in the first stage. The output of Cgaln is 'glocal' in the sense that rearrangements are taken into consideration while each alignable region is extended as long as possible. Thus, Cgaln is not only fast and memory-efficient, but also can filter noisy outputs without missing the most important homologous segment pairs.

http://www.iam.u-tokyo.ac.jp/chromosomeinformatics/rnakato/cgaln/

Address of the bookmark: http://www.iam.u-tokyo.ac.jp/chromosomeinformatics/rnakato/cgaln/